outlook 2k3
in [General]
|
From: Whisperss on 7 Mar 2010 06:21 I am trying to set this up to link to my hotmail account but when I do I get the following message "Access to the account was denied: make sure your user name and password are correct" when it tries to synchronize the headers, thereby only executing half the job. There is nothing wrong with the user name and password, its the same one I have used for a long time and I double and triple checked it for accuracy. the error code 0X800ccc33 also appears in this message.
From: Peter Foldes on 7 Mar 2010 06:49 Compare your Settings to those found here: http://liveunplugged.spaces.live.com/Blog/cns!F92775FC46A390CA!422.entry -- Peter Please Reply to Newsgroup for the benefit of others Requests for assistance by email can not and will not be acknowledged. "Whisperss" <Whisperss(a)discussions.microsoft.com> wrote in message news:99BFF27A-A746-4A81-B0DB-0C10C4EF1385(a)microsoft.com... >I am trying to set this up to link to my hotmail account but when I do I get > the following message "Access to the account was denied: make sure your user > name and password are correct" when it tries to synchronize the headers, > thereby only executing half the job. There is nothing wrong with the user > name and password, its the same one I have used for a long time and I double > and triple checked it for accuracy. the error code 0X800ccc33 also appears in > this message.
From: VanguardLH on 7 Mar 2010 17:18 Whisperss wrote: > I am trying to set this up to link to my hotmail account but when I do I get > the following message "Access to the account was denied: make sure your user > name and password are correct" when it tries to synchronize the headers, > thereby only executing half the job. There is nothing wrong with the user > name and password, its the same one I have used for a long time and I double > and triple checked it for accuracy. the error code 0X800ccc33 also appears in > this message. And are we to guess if you are using POP or Deltasync to access your Hotmail account? Does "trying to set this up" mean it is a new configuration that you have never gotten to work or an old setup that just stopped working and that you're trying to fix? "used for a long time" WHERE? In the webmail client to Hotmail, in Outlook, or in some other e-mail client? Cutoff for DAV access to Hotmail ended on September 1, 2009. Microsoft switched to Deltasync as their HTTP communications protocol to their webmail service. E-mail clients that support only DAV for HTTP access will no longer be able to use it to access Hotmail. Your choices after the cutoff are: - Use POP to access your Hotmail account. - Use a Deltasync-enabled client to see all the folders in your webmail account for IMAP-like access. - Use the webmail interface that has always been there even before Microsoft bought Hotmail. Also see http://www.howto-outlook.com/news/hotmailaccessforbidden.htm POP has no concept of folders. It only understands a mailbox where ALL your e-mails reside. Because POP doesn't use folders, there are no commands within the Post Office Protocol to navigate or select folders. It only has access to your mailbox. The mailbox that POP can access is the Inbox folder you see when using the webmail client to your account. http://en.wikipedia.org/wiki/Post_office_protocol http://communication.howstuffworks.com/email.htm http://email.about.com/cs/standards/a/pop_basics.htm http://email.about.com/cs/standards/a/how_pop_works.htm Hotmail has never had and still doesn't have IMAP access. IMAP lets you access other folders in your e-mail account (or, more accurately, those folders to which you have subscribed). Microsoft has hinted that they may make IMAP access possible in the future but no Hotmail user is going to pend using their account until if and whenever IMAP access shows up. The only way to have local access to the non-Inbox folders in your Hotmail account is to use Deltasync (DAV support died on 01-SEP-2009). This protocol makes available all your folders that you defined using either the Deltasync-enabled e-mail client (which then replicates that local folder on the server) or syncs to those folders you created using the webmail client. If you want IMAP-like access to your Hotmail account, you'll need to use either the webmail client or a local e-mail client that supports Deltasync, which are: - Windows Live Mail (replaces Outlook Express and Vista's Windows Mail). - Outlook 2003/2007 *plus* the Outlook Connector add-on. The add-on adds Deltasync support since no version of Outlook natively supports Deltasync. The add-on doesn't work with prior versions of Outlook. - Use a screen-scraper proxy or e-mail client that tries to navigate the web pages for the webmail client to Hotmail. Outlook Express NEVER had support for Deltasync. It is a dead product: functional development ceased back in 2002, a patch for SP-2 in Windows XP allowed moving the default location of signature and quoted content, and security patches ended in 2006 when the development team got disbanded. It does have DAV support but Microsoft is discontinuing DAV access to their mail hosts on Sept 1, 2009, and moving to Deltasync. There will be no changes to OE to add Deltasync support to it. That means you can use OE for POP access to your Hotmail account but not for Deltasync access (that would give you access to the other webmail folders). There are some screen scraper proxies or clients that will try to navigate the web pages that makeup the webmail interface for Hotmail. That is, they are coded to walk through the Hotmail web site. They act like a local POP-to-HTTP proxy. You configure a POP account in your e-mail client that connects to this protocol converter proxy that then uses HTTP to walk through the Hotmail web site. They aren't reliable. FreePOPs, YahooPOPs (for use with Yahoo Mail only), and Thunderbird with its Webmail proxy are such types of screen-scraper clients. If the webmail interface changes then these screen-scraper clients will fail. You cannot get your e-mails using them until their author gets around to making their web-walking code match the changes to the web site. Since they provide POP access through their converter proxy, you only get access to your mailbox (which is the Inbox folder shown in the webmail client). Since you use POP to connect to the protocol converter proxy, you won't get IMAP or Deltasync access to the other folders available in the webmail client. Since Hotmail, even for free accounts, has POP access, there is no point in using a screen scraper to access Hotmail. --- Posting Hints --- ALWAYS REVIEW your message before submitting it. You want someone OTHER than yourself to understand your post. Also remember that no one here is looking over your shoulder to see at what you are pointing. If you don't well explain your situation by providing the details that you already know, don't expect others to know what is your situation. Explain YOUR computing environment and just what actions you take to reproduce the problem. Often you get just one chance per potential respondent to elicit a reply from them. If they skip your post because you gave them nothing to go on (no details, no versions, no OS, no context) then they will usually move on to the next post and never return to yours. What is Usenet: http://en.wikipedia.org/wiki/Usenet http://en.wikipedia.org/wiki/Newsgroups http://www.masonicinfo.com/newsgroups.htm http://www.mcfedries.com/Ramblings/usenet-primer.asp When using a webnews-for-dummies interface (e.g., Microsoft's Communities, Google Groups, or a leech site using a forum-to-Usenet proxy), those are gateways to Usenet. Despite the pretense of a forum, you are participating in a newsgroup (aka Usenet). How to post to newsgroups: http://66.39.69.143/goodpost.htm http://support.microsoft.com/kb/555375 http://users.tpg.com.au/bzyhjr/liszt.html http://www.mugsy.org/asa_faq/getting_along/usenet.shtml Regarding error or status messages: - Do NOT omit the message. - Do NOT describe the message. - Do NOT summarize the message. - Do NOT paraphrase the message. - Do NOT truncate the message. - Do show the ENTIRE message (but munge or star out personal info, like your username in an e-mail address but not the domain). - DETAIL the steps to reproduce the error or problem.
From: Brian Tillman [MVP-Outlook] on 8 Mar 2010 08:28 "Whisperss" <Whisperss(a)discussions.microsoft.com> wrote in message news:99BFF27A-A746-4A81-B0DB-0C10C4EF1385(a)microsoft.com... >I am trying to set this up to link to my hotmail account but when I do I get > the following message "Access to the account was denied: make sure your user > name and password are correct" when it tries to synchronize the headers, > thereby only executing half the job. There is nothing wrong with the user > name and password, its the same one I have used for a long time and I double > and triple checked it for accuracy. the error code 0X800ccc33 also appears > in > this message. "How to add your e-mail account to Microsoft Outlook" http://windowslivehelp.com/solution.aspx?solutionid=618dcd05-8494-4827-bba6-8072406b3fb7 -- Brian Tillman [MVP-Outlook]
From: Brian Tillman [MVP-Outlook] on 8 Mar 2010 08:29 "VanguardLH" <V(a)nguard.LH> wrote in message news:hn18ni$i0$1(a)news.albasani.net... > Whisperss wrote: > And are we to guess if you are using POP or Deltasync to access your Hotmail > account? There's no need to guess. Just point them to the correct article at windowslivehelp.com and let him decide for himself. -- Brian Tillman [MVP-Outlook]
|
Next
|
Last
Pages: 1 2 Prev: search glitch \ problem Outlook 2007 Next: Out of Office message in outlook |