Prev: [PATCH 1/1] Add support for PL2501 Host to Host USB 2.0 Device. Fully compatible with existing PL2301/2302 driver.
Next: Removing dead CONFIG_PPC47x
From: Dan Carpenter on 9 Jun 2010 08:10
cb->atapi.cdb is an array of 16 u8 elements. The call too memset()
would set the first part of the sge array to zero as well. It's not
a packed struct.

This one has been around for five years. I found it with Smatch. I
think the reason no one has seen it before is because we normally call
sil24_fill_sg() and that overwrites sge with proper information?

Signed-off-by: Dan Carpenter <error27(a)gmail.com>
---
I don't have this hardware myself so I can't test it. Sorry. :(

diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index e925051..9e459eb 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -865,7 +865,7 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
} else {
prb = &cb->atapi.prb;
sge = cb->atapi.sge;
- memset(cb->atapi.cdb, 0, 32);
+ memset(cb->atapi.cdb, 0, sizeof(cb->atapi.cdb));
memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);

if (ata_is_data(qc->tf.protocol)) {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
 | 
Pages: 1
Prev: [PATCH 1/1] Add support for PL2501 Host to Host USB 2.0 Device. Fully compatible with existing PL2301/2302 driver.
Next: Removing dead CONFIG_PPC47x