power supplies
in [Dell]
|
From: Ben Myers on 11 Jun 2010 12:37 On 6/10/2010 11:01 PM, Christopher Muto wrote: > Ben Myers wrote: >> On 6/10/2010 9:56 PM, Ben Myers wrote: >>> On 6/10/2010 3:47 PM, mc wrote: >>>> I have few optiplex gx260 and 280 models (desktop) that have the 180 >>>> and 210 watt supplies. Is there anyone out there that designed a >>>> stronger power supply for these systems? I called dell and asked them >>>> if they had a pc express video card (low profile) for the gx280 and >>>> they could not find one that would work with the 210 watt >>>> supply.....go figure >>>> mc >>> >>> I have never seen higher rated power supplies for the desktop and small >>> form factor Optiplex GX240, GX260, GX270, and GX280. >>> >>> What Dell did not tell you is that they have exactly zero inventory of >>> low profile PCI Express cards. That's why they could not find one. Any >>> low profile PCI Express card will work in the small Optiplex GX280 >>> system. This is not saying very much, because the choice is extremely >>> limited, as very few card manufacturers bothered with low profile PCI >>> Express. Numerically, there is/was not much of a market for these cards. >>> >>> I have some fanless ATI Radeon X600 SE 128MB DDR1 PCI-e Video Card for >>> the Dell OptiPlex GX280 (Dell part number F9595). These are >>> factory-sealed in original Dell anti-static bags. How many do you need? >>> >>> ... Ben Myers >> >> P.S.: The F9595 has a DVI connector only... Ben > > i thought that the f9595 was a full height card (technically a half > height card but with a full height bracket). the dell part g9184 is the > same card with the half height bracket. and though it only has a single > dvi port a dvi to vga connector or a dvi to dual vga conenctor can be > used with the x600. You're right, Christopher. The F9595 has a full-length bracket. I do have some P4007 with the half-height bracket. Also ATI Radeon, but X300 chip. Cards have an ATI part number on them, but the markings do not look like the usual ATI contract manufacturer... Ben
From: HH on 11 Jun 2010 18:44
I found a low profile (w low profile bracket) ATI Radeon X1300 PCI-E X16 card on eBay for $12.99. It works great in my Optiplex 620 SFF Dell. I recently gave away an Optiplex GX280 SFF and found an nVidia 7200 card for it on eBay. They are out there. HH "Ben Myers" <ben_myers(a)charter.net> wrote in message news:hutonn$3dl$1(a)news.eternal-september.org... > On 6/10/2010 11:01 PM, Christopher Muto wrote: >> Ben Myers wrote: >>> On 6/10/2010 9:56 PM, Ben Myers wrote: >>>> On 6/10/2010 3:47 PM, mc wrote: >>>>> I have few optiplex gx260 and 280 models (desktop) that have the 180 >>>>> and 210 watt supplies. Is there anyone out there that designed a >>>>> stronger power supply for these systems? I called dell and asked them >>>>> if they had a pc express video card (low profile) for the gx280 and >>>>> they could not find one that would work with the 210 watt >>>>> supply.....go figure >>>>> mc >>>> >>>> I have never seen higher rated power supplies for the desktop and small >>>> form factor Optiplex GX240, GX260, GX270, and GX280. >>>> >>>> What Dell did not tell you is that they have exactly zero inventory of >>>> low profile PCI Express cards. That's why they could not find one. Any >>>> low profile PCI Express card will work in the small Optiplex GX280 >>>> system. This is not saying very much, because the choice is extremely >>>> limited, as very few card manufacturers bothered with low profile PCI >>>> Express. Numerically, there is/was not much of a market for these >>>> cards. >>>> >>>> I have some fanless ATI Radeon X600 SE 128MB DDR1 PCI-e Video Card for >>>> the Dell OptiPlex GX280 (Dell part number F9595). These are >>>> factory-sealed in original Dell anti-static bags. How many do you need? >>>> >>>> ... Ben Myers >>> >>> P.S.: The F9595 has a DVI connector only... Ben >> >> i thought that the f9595 was a full height card (technically a half >> height card but with a full height bracket). the dell part g9184 is the >> same card with the half height bracket. and though it only has a single >> dvi port a dvi to vga connector or a dvi to dual vga conenctor can be >> used with the x600. > > You're right, Christopher. The F9595 has a full-length bracket. I do > have some P4007 with the half-height bracket. Also ATI Radeon, but X300 > chip. Cards have an ATI part number on them, but the markings do not look > like the usual ATI contract manufacturer... Ben > |