Prev: 10V ceramic cap at 95V DC ?
Next: Rocket Science
From: Hawker on 25 Apr 2007 15:04
Does anyone have a vendor they like working with that works NRE +
production cost for low volume SMPS flyback topology transformers.

I need an EP-13 size transformer designed and produced for an NCP-1012
5w dual output design. My client is low volume at around 200 per year.
All the folks I currently use are better set up for 1,000-20,000 EAU and
not a good choice for this low a volume.

I have little experience at these low volumes so could use some advice.

Thanx
Hawker
From: John Larkin on 25 Apr 2007 16:07
On Wed, 25 Apr 2007 15:04:18 -0400, Hawker
<Hawker{removethispart}@ashevillecommunity.org> wrote:

>Does anyone have a vendor they like working with that works NRE +
>production cost for low volume SMPS flyback topology transformers.
>
>I need an EP-13 size transformer designed and produced for an NCP-1012
>5w dual output design. My client is low volume at around 200 per year.
>All the folks I currently use are better set up for 1,000-20,000 EAU and
>not a good choice for this low a volume.
>
>I have little experience at these low volumes so could use some advice.
>
>Thanx
> Hawker


http://www.minntronix.com/content/pages/default.asp

Talk to Butch.

or

http://www.precision-inc.com/

Alan Kamann is the designer here.

Both do good work in modest quantities.

John

From: Hawker on 25 Apr 2007 23:01
On 4/25/2007 4:07 PM, The digits of John Larkin's hands composed the
following:
> On Wed, 25 Apr 2007 15:04:18 -0400, Hawker
> <Hawker{removethispart}@ashevillecommunity.org> wrote:
>
>> Does anyone have a vendor they like working with that works NRE +
>> production cost for low volume SMPS flyback topology transformers.
>>
>> I need an EP-13 size transformer designed and produced for an NCP-1012
>> 5w dual output design. My client is low volume at around 200 per year.
>> All the folks I currently use are better set up for 1,000-20,000 EAU and
>> not a good choice for this low a volume.
>>
>> I have little experience at these low volumes so could use some advice.
>>
>> Thanx
>> Hawker
>
>
> http://www.minntronix.com/content/pages/default.asp
>
> Talk to Butch.
>
> or
>
> http://www.precision-inc.com/
>
> Alan Kamann is the designer here.
>
> Both do good work in modest quantities.
>
> John
>

Thanx I'll check with both of them in the morning.
I wish I knew about Minntronix. Pretty cool that they have off the shelf
TopSwitch GX and TinySwitch parts. I wish I knew about that a few
months ago. I wonder if there prices are as good as XFMRS Inc?

Hawker
 | 
Pages: 1
Prev: 10V ceramic cap at 95V DC ?
Next: Rocket Science