Prev: op-amp nV input offset voltage
Next: large spice circuits
From: DeMarco on 25 Jun 2008 16:35
Hello, I was given an S2P (2-Port S-parameter) file and I need to use
it in a netlist in SPICE. I have only ever worked with SPICE models,
not with recorded data in SPICE. I believe that my S2P file might be
in a magnitude and phase angle format versus the decibel and phase
(degrees) format that SPICE prefers. Is there a converter program or
website that discusses this issue? Thanks a lot.

-Kevin DeMarco
From: Helmut Sennewald on 24 Jun 2008 18:36
"DeMarco" <kevin.demarco(a)gmail.com> schrieb im Newsbeitrag
news:ac079202-5d47-46a4-b4af-367f6f56bc12(a)x41g2000hsb.googlegroups.com...
> Hello, I was given an S2P (2-Port S-parameter) file and I need to use
> it in a netlist in SPICE. I have only ever worked with SPICE models,
> not with recorded data in SPICE. I believe that my S2P file might be
> in a magnitude and phase angle format versus the decibel and phase
> (degrees) format that SPICE prefers. Is there a converter program or
> website that discusses this issue? Thanks a lot.
>
> -Kevin DeMarco


Hello Kevin,

I assume there are a few programs depending on what SPICE you have.

I know a translation-program for LTspice and PSPICE.

LTspice Yahoo group
http://tech.groups.yahoo.com/group/LTspice/

The converter program is in the Files-section of this group.

Files > Tut > S-Parameter > S-Parameter to SPICE > s2spice_win095.exe

Best regards,
Helmut


 | 
Pages: 1
Prev: op-amp nV input offset voltage
Next: large spice circuits