scangear error
in [Scanners]
|
From: Per Larsen on 3 Oct 2006 10:55 On 03.10.2006 07:02, Bert typed the following:: > Error appears before the preview. I don't make it that far. I use Canon > lide60, USB 2 connected. Never had any problems, until this started > yesterday. Doesn't make any difference which program I use, same problem. I > removed all entries in twain_32 directory, but that wasn't a good idea. > After reinstall scangear, nothing works at all, so I had to restore those > entries. As I set using Microsft Digital image, fully automated works, using > my scanner software gives an error. > I cannot find any info in the Canon database, I have sent them an email. > Thank you for taking your time. > > Bert. Have you tried to uninstall using the Canon 'deldrv.exe' program? PerL
From: CSM1 on 3 Oct 2006 11:05 "Bert" <xx(a)xx.com> wrote in message news:A9mUg.49489$wo3.22775(a)newsfe7-gui.ntli.net... > > "CSM1" <nomail(a)nomoremail.com> wrote in message > news:_ujUg.7876$GR.7413(a)newssvr29.news.prodigy.net... >> "Bert" <xx(a)xx.com> wrote in message >> news:D%eUg.81786$DB3.61489(a)newsfe6-gui.ntli.net... >>> >>> "CSM1" <nomail(a)nomoremail.com> wrote in message >>> news:iQeUg.9140$e66.3332(a)newssvr13.news.prodigy.com... >>>> "Bert" <xx(a)xx.com> wrote in message >>>> news:OfeUg.49255$wo3.27251(a)newsfe7-gui.ntli.net... >>>>>I receive scangear error not enough free disk space 30,0,0. There is >>>>>space enough, advice please. >>>>> >>>>> Thanks, >>>>> >>>>> Bert. >>>>> >>>> How much space do you have free on your hard drive? >>>> What is your OS? >>>> >>>> How large is the image you are trying to scan. What DPI? How many >>>> Pixels. >>>> >>>> You need about twice the amount of free hard drive space as the image >>>> size in bytes you are trying to scan. >>>> >>>> If you trying to scan say a 8.5" X 11" paper at 300 DPI. It will make >>>> an image that is 2550 x 3300 pixels or 8,415,000 Pixels X 3 byte per >>>> pixel= 25,245,000 (25.245 MB) in color. You need at least 50 MB of free >>>> space. >>>> >>>> On my system a 8.5" X 11" scan at 300 DPI produces a 24.11 MB >>>> uncompressed Tiff file. >>>> >>>> Maybe uninstall then reinstall ScanGear. >>>> >>>> -- >>>> CSM1 >>>> http://www.carlmcmillan.com >>>> -- >>> >>> Free space 12 GB, Win XP, error comes before I have any chance to chnage >>> any settings. I have already tried to reinstall Scangear but no luck at >>> all. Full automatic scan works, but everythng through scangear doesn't >>> work. >> >> >> Since you said ScanGear, I assume you have a Canon Scanner. >> And you are scanning via the TWAIN interface in some Photo Editor. >> I hope you are not scanning using the Canon Canoscan Toolbox. >> >> Are you doing the preview in the Advanced Mode before trying to do a >> final scan? >> You have to do at least one preview before anything works correctly in >> the Advanced Mode of Scangear. >> >> In the preview window you must set the scan area by drawing the dashed >> box around the area you want to scan. >> >> Click the Scan button in the ScanGear preview Window to do the final scan >> and transfer the image to the photo editor. >> >> -- >> CSM1 >> http://www.carlmcmillan.com >> -- >> > Error appears before the preview. I don't make it that far. I use Canon > lide60, USB 2 connected. Never had any problems, until this started > yesterday. Doesn't make any difference which program I use, same problem. > I removed all entries in twain_32 directory, but that wasn't a good idea. > After reinstall scangear, nothing works at all, so I had to restore those > entries. As I set using Microsft Digital image, fully automated works, > using my scanner software gives an error. > I cannot find any info in the Canon database, I have sent them an email. > Thank you for taking your time. > > Bert. Sounds like you need to do a Manual delete of all of the Canon driver files. Unplug the USB cable to the scanner. First run the Canon uninstall utility. It is on the original Canon Setup CD, when you run Setup.exe, one of the choices is uninstall the Canon software. Open Device Manager and remove your Canon Scanner if you find one or more. Start>Run. Type regedit<Enter> Search regedit for any scangear entries. Backup and then delete them. Look in \Windows\Twain_32 for any left over Canon scanner driver left behind, Delete them. Reboot the computer. Install the Canon Software from the CD. Reboot the computer. Plug in the scanner. XP should find new hardware and install the driver. Good luck. -- CSM1 http://www.carlmcmillan.com --
From: Bert on 3 Oct 2006 11:18
"CSM1" <nomail(a)nomoremail.com> wrote in message news:Z_uUg.19095$Ij.5836(a)newssvr14.news.prodigy.com... > "Bert" <xx(a)xx.com> wrote in message > news:A9mUg.49489$wo3.22775(a)newsfe7-gui.ntli.net... >> >> "CSM1" <nomail(a)nomoremail.com> wrote in message >> news:_ujUg.7876$GR.7413(a)newssvr29.news.prodigy.net... >>> "Bert" <xx(a)xx.com> wrote in message >>> news:D%eUg.81786$DB3.61489(a)newsfe6-gui.ntli.net... >>>> >>>> "CSM1" <nomail(a)nomoremail.com> wrote in message >>>> news:iQeUg.9140$e66.3332(a)newssvr13.news.prodigy.com... >>>>> "Bert" <xx(a)xx.com> wrote in message >>>>> news:OfeUg.49255$wo3.27251(a)newsfe7-gui.ntli.net... >>>>>>I receive scangear error not enough free disk space 30,0,0. There is >>>>>>space enough, advice please. >>>>>> >>>>>> Thanks, >>>>>> >>>>>> Bert. >>>>>> >>>>> How much space do you have free on your hard drive? >>>>> What is your OS? >>>>> >>>>> How large is the image you are trying to scan. What DPI? How many >>>>> Pixels. >>>>> >>>>> You need about twice the amount of free hard drive space as the image >>>>> size in bytes you are trying to scan. >>>>> >>>>> If you trying to scan say a 8.5" X 11" paper at 300 DPI. It will make >>>>> an image that is 2550 x 3300 pixels or 8,415,000 Pixels X 3 byte per >>>>> pixel= 25,245,000 (25.245 MB) in color. You need at least 50 MB of >>>>> free space. >>>>> >>>>> On my system a 8.5" X 11" scan at 300 DPI produces a 24.11 MB >>>>> uncompressed Tiff file. >>>>> >>>>> Maybe uninstall then reinstall ScanGear. >>>>> >>>>> -- >>>>> CSM1 >>>>> http://www.carlmcmillan.com >>>>> -- >>>> >>>> Free space 12 GB, Win XP, error comes before I have any chance to >>>> chnage any settings. I have already tried to reinstall Scangear but no >>>> luck at all. Full automatic scan works, but everythng through scangear >>>> doesn't work. >>> >>> >>> Since you said ScanGear, I assume you have a Canon Scanner. >>> And you are scanning via the TWAIN interface in some Photo Editor. >>> I hope you are not scanning using the Canon Canoscan Toolbox. >>> >>> Are you doing the preview in the Advanced Mode before trying to do a >>> final scan? >>> You have to do at least one preview before anything works correctly in >>> the Advanced Mode of Scangear. >>> >>> In the preview window you must set the scan area by drawing the dashed >>> box around the area you want to scan. >>> >>> Click the Scan button in the ScanGear preview Window to do the final >>> scan and transfer the image to the photo editor. >>> >>> -- >>> CSM1 >>> http://www.carlmcmillan.com >>> -- >>> >> Error appears before the preview. I don't make it that far. I use Canon >> lide60, USB 2 connected. Never had any problems, until this started >> yesterday. Doesn't make any difference which program I use, same problem. >> I removed all entries in twain_32 directory, but that wasn't a good idea. >> After reinstall scangear, nothing works at all, so I had to restore those >> entries. As I set using Microsft Digital image, fully automated works, >> using my scanner software gives an error. >> I cannot find any info in the Canon database, I have sent them an email. >> Thank you for taking your time. >> >> Bert. > > Sounds like you need to do a Manual delete of all of the Canon driver > files. > Unplug the USB cable to the scanner. > > First run the Canon uninstall utility. It is on the original Canon Setup > CD, when you run Setup.exe, one of the choices is uninstall the Canon > software. > > Open Device Manager and remove your Canon Scanner if you find one or more. > > Start>Run. Type regedit<Enter> > Search regedit for any scangear entries. Backup and then delete them. > > Look in \Windows\Twain_32 for any left over Canon scanner driver left > behind, Delete them. > > Reboot the computer. > Install the Canon Software from the CD. > Reboot the computer. > Plug in the scanner. XP should find new hardware and install the driver. > > Good luck. > -- > CSM1 > http://www.carlmcmillan.com > -- > Thank you all for your advice. I have deleted the canon directory in documents and settings, my name and application data. problem solved. Many thanks, Bert. |