Prev: Full-featured Controller Area Network simulator available for free
Next: New Microsoft Tech.. hello 9V
From: uzair on 9 Jul 2010 11:42
>On Jul 3, 9:30=A0pm, "uzair" <bhatti.uzair(a)n_o_s_p_a_m.yahoo.com> wrote:
>> Hi
>>
>> I need a small size (approx 50mm by 100mm) low noise 16-channel ADC
card
>> sending data on gigabit ethernet for real time data acquistion.
>> Minimum sampling (simultaneous) requirement per channel is approx 48
>> Ksamp/s/ch.
>>
>> I know i ask for lot of things in very small size but if any one know
som=
>e
>> commercially available adc cards near these specification, let me know
it
>> please.
>>
>> THANKS
>>
>> --------------------------------------- =A0 =A0 =A0 =A0
>> Posted throughhttp://www.EmbeddedRelated.com
>
>50 by 100 is a bit tight, but doable. Assuming you need 16 bit ADC
>resolution this makes about 12 MbpS raw for all 16 ADCs.
>Our netMCA is way larger and works at 10/100 MbpS, but given that
>you order > say 10, I can fit it into 50x100 for you. I'll
>need to know the ADC resolution, too.
>It will cope with the 12 MSPS, you will be able to stream that
>the over tcp.
>
>http://tgi-sci.com/tgi/nmcatb.htm
>
>Dimiter
>
>------------------------------------------------------
>Dimiter Popoff Transgalactic Instruments
>
>http://www.tgi-sci.com
>------------------------------------------------------
>http://www.flickr.com/photos/didi_tgi/sets/72157600228621276/
>
>Minumum requirement for adc resolution is atleast 16 bit with 48
Ksamp/s/ch .Will you provide adc with your solution or only netMCA?

---------------------------------------
Posted through http://www.EmbeddedRelated.com
From: Didi on 9 Jul 2010 16:22
On Jul 9, 6:42 pm, "uzair" <bhatti.uzair(a)n_o_s_p_a_m.yahoo.com> wrote:
> >On Jul 3, 9:30=A0pm, "uzair" <bhatti.uzair(a)n_o_s_p_a_m.yahoo.com> wrote:
> >> Hi
>
> >> I need a small size (approx 50mm by 100mm) low noise 16-channel ADC
> card
> >> sending data on gigabit ethernet for real time data acquistion.
> >> Minimum sampling (simultaneous) requirement per channel is approx 48
> >> Ksamp/s/ch.
>
> >> I know i ask for lot of things in very small size but if any one know
> som=
> >e
> >> commercially available adc cards near these specification, let me know
> it
> >> please.
>
> >> THANKS
>
> >> --------------------------------------- =A0 =A0 =A0 =A0
> >> Posted throughhttp://www.EmbeddedRelated.com
>
> >50 by 100 is a bit tight, but doable. Assuming you need 16 bit ADC
> >resolution this makes about 12 MbpS raw for all 16 ADCs.
> >Our netMCA is way larger and works at 10/100 MbpS, but given that
> >you order > say 10, I can fit it into 50x100 for you. I'll
> >need to know the ADC resolution, too.
> >It will cope with the 12 MSPS, you will be able to stream that
> >the over tcp.
>
> >http://tgi-sci.com/tgi/nmcatb.htm
>
> >Dimiter
>
> >------------------------------------------------------
> >Dimiter Popoff               Transgalactic Instruments
>
> >http://www.tgi-sci.com
> >------------------------------------------------------
> >http://www.flickr.com/photos/didi_tgi/sets/72157600228621276/
>
> >Minumum requirement for adc resolution is atleast 16 bit with 48
>
> Ksamp/s/ch .Will you provide adc with your solution or only netMCA?        
>

Sure, feel free to get in touch with me privately.
Will take some more details, like input voltage range etc., but
we'll probably be interested in doing it.

Dimiter


First  |  Prev  | 
Pages: 1 2
Prev: Full-featured Controller Area Network simulator available for free
Next: New Microsoft Tech.. hello 9V