Prev: Roaming profiles
Next: event 1500 and 1508
From: Marc Moennikes on 11 Nov 2009 03:56
Hello,

do you have any KB-Articel ID or any keywords for this hotfix?
I have talked with the MS-hotline (we are gold partner) and they could not
help us.

Thank you

Regards

Marc

"Jeff Shipman [MSFT]" wrote:

> This is a known issue with these platforms and there is no known workaround.
> If your organization has a support contract with Microsoft, I suggest going
> through those channels if you wish to pursue a hotfix.
>
> Thanks.
>
> --
> Jeff Shipman [MSFT]
> Windows Security and Identity
> *This posting is provided "AS IS" with no warranties, and confers no rights.
>
>
> "Huwy" wrote:
>
> > Thanks for coming back Jeff.
> >
> > The Clients run Windows XPe.
> >
> > -H
> >
> >
> > "Jeff Shipman [MSFT]" <jshipman(a)online.microsoft.com> wrote in message
> > news:05E13B59-4A06-4501-B65C-6A106E239CA8(a)microsoft.com...
> > > Which Operating Systems are being used when connecting to the Windows
> > > Server
> > > 2008 Terminal Server?
> > >
> > > --
> > > Jeff Shipman [MSFT]
> > > Windows Security and Identity
> > > *This posting is provided "AS IS" with no warranties, and confers no
> > > rights.
> > >
> > >
> > > "Huwy" wrote:
> > >
> > >> Hi,
> > >>
> > >> I'm current experimenting with using smartcards with our windows-based
> > >> shop
> > >> computers. They connect to a windows 2008 terminal server to run our
> > >> bespoke
> > >> "till" application.
> > >>
> > >> The shop staff enter a smartcard and this automatically takes them into
> > >> terminal server. When they remove the smartcard it should then disconnect
> > >> them.
> > >>
> > >> On the terminal server I have set the "local security - local policy -
> > >> security options: Interactive logon:smart card removal behaviour -
> > >> disconnect if a remote terminal services session"
> > >>
> > >> The problem I'm having is that this all works fine for the inital logon
> > >> and
> > >> disconnection - i.e. by putting in the smart card and then removing it. I
> > >> can then reconnect fine, but when I remove the smartcard I don't get
> > >> disconnected. On any subsequent connections I'm not disconnected when the
> > >> smart card is removed.
> > >>
> > >> Can anyone help with this issue? Cheers in advance,
> > >>
> > >> H
> > >>
> > >>
> > >>
> >
> >
> >
From: Jeff Shipman [MSFT] on 7 Dec 2009 13:11
Hi, Marc. Sorry for the late reply. I stopped getting reply notifications.

There is no KB Article or hotfix for this issue. If you need a hotfix, you
will need to request one via customer support.

--
Jeff Shipman [MSFT]
Windows Security and Identity
*This posting is provided "AS IS" with no warranties, and confers no rights.


"Marc Moennikes" wrote:

> Hello,
>
> do you have any KB-Articel ID or any keywords for this hotfix?
> I have talked with the MS-hotline (we are gold partner) and they could not
> help us.
>
> Thank you
>
> Regards
>
> Marc
>
> "Jeff Shipman [MSFT]" wrote:
>
> > This is a known issue with these platforms and there is no known workaround.
> > If your organization has a support contract with Microsoft, I suggest going
> > through those channels if you wish to pursue a hotfix.
> >
> > Thanks.
> >
> > --
> > Jeff Shipman [MSFT]
> > Windows Security and Identity
> > *This posting is provided "AS IS" with no warranties, and confers no rights.
> >
> >
> > "Huwy" wrote:
> >
> > > Thanks for coming back Jeff.
> > >
> > > The Clients run Windows XPe.
> > >
> > > -H
> > >
> > >
> > > "Jeff Shipman [MSFT]" <jshipman(a)online.microsoft.com> wrote in message
> > > news:05E13B59-4A06-4501-B65C-6A106E239CA8(a)microsoft.com...
> > > > Which Operating Systems are being used when connecting to the Windows
> > > > Server
> > > > 2008 Terminal Server?
> > > >
> > > > --
> > > > Jeff Shipman [MSFT]
> > > > Windows Security and Identity
> > > > *This posting is provided "AS IS" with no warranties, and confers no
> > > > rights.
> > > >
> > > >
> > > > "Huwy" wrote:
> > > >
> > > >> Hi,
> > > >>
> > > >> I'm current experimenting with using smartcards with our windows-based
> > > >> shop
> > > >> computers. They connect to a windows 2008 terminal server to run our
> > > >> bespoke
> > > >> "till" application.
> > > >>
> > > >> The shop staff enter a smartcard and this automatically takes them into
> > > >> terminal server. When they remove the smartcard it should then disconnect
> > > >> them.
> > > >>
> > > >> On the terminal server I have set the "local security - local policy -
> > > >> security options: Interactive logon:smart card removal behaviour -
> > > >> disconnect if a remote terminal services session"
> > > >>
> > > >> The problem I'm having is that this all works fine for the inital logon
> > > >> and
> > > >> disconnection - i.e. by putting in the smart card and then removing it. I
> > > >> can then reconnect fine, but when I remove the smartcard I don't get
> > > >> disconnected. On any subsequent connections I'm not disconnected when the
> > > >> smart card is removed.
> > > >>
> > > >> Can anyone help with this issue? Cheers in advance,
> > > >>
> > > >> H
> > > >>
> > > >>
> > > >>
> > >
> > >
> > >
 | 
Pages: 1
Prev: Roaming profiles
Next: event 1500 and 1508