using !devext
in [Device Drivers]
|
From: adidas on 18 Apr 2006 05:06 i want to use !devext. my box is xp pro (no service pack). but it claims that "Your debugger is not using the correct symbols " what's pci!_PCI_DEVICE ? TIA !devnode 0 1 .... DevNode 0x81fa0298 for PDO 0x81fd8a60 InstancePath is "PCI\VEN_8086&DEV_24C3&SUBSYS_24C28086&REV_02\3&13c0b0c5&0&FB" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x81fa0178 for PDO 0x81fd8718 InstancePath is "PCI\VEN_8086&DEV_24C5&SUBSYS_4730414C&REV_02\3&13c0b0c5&0&FD" ServiceName is "ALCXWDM" TargetDeviceNotify List - f 0xe213e548 b 0xe213e548 State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) .... !devobj 81fd8a60 Device object (81fd8a60) is for: NTPNP_PCI0009 \Driver\PCI DriverObject 81fd7bf8 Current Irp 00000000 RefCount 0 Type 00000022 Flags 00001040 Dacl e12cc584 DevExt 81fd8b18 DevObjExt 81fd8bf0 DevNode 81fa0298 ExtensionFlags (0x00000010) DOE_START_PENDING AttachedDevice (Upper) 81fa0e00 \Driver\ACPI Device queue is not busy. !devext 81fd8b18 PCI and it gives me the following: ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!_PCI_DEVICE *** *** *** ************************************************************************* PDO Extension, Bus 0x0, Device 1f, Function 3. DevObj 0x81fd8a60 PCI Parent Bus FDO DevExt 0x81f8d8d0 Device State = PciNotStarted Vendor ID 8086 (INTEL) Device ID 24C3 Subsystem Vendor ID 8086 (INTEL) Subsystem ID 24C2 Class Base/Sub 0c/05 (Serial Bus Controller/Unknown Sub Class) Programming Interface: 00, Revision: 02, IntPin: 02, Line Raw/Adj 09/09 Enables ((cmd & 7) = 1): I Capabilities Pointer = <none> ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_PDO_EXTENSION *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_POWER_STATE *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_POWER_STATE *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_POWER_STATE *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_POWER_STATE *** *** *** ************************************************************************* CurrentState: System Unspecified, Device Unspecified WakeLevel: System Unspecified, Device Unspecified ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_POWER_STATE *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_POWER_STATE *** *** *** ************************************************************************* Requirements: Alignment Length Minimum Maximum ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_FUNCTION_RESOURCES *** *** *** ************************************************************************* Current: <none> ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!_PCI_PDO_EXTENSION *** *** *** ************************************************************************* Secondary Extensions ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_SECONDARY_EXTENSION *** *** *** ************************************************************************* Unknown Extension Type.
From: Mark Roddy on 18 Apr 2006 07:42 On Tue, 18 Apr 2006 17:06:05 +0800, "adidas" <adidas(a)hotmail.com> wrote: >i want to use !devext. my box is xp pro (no service pack). >but it claims that "Your debugger is not using the correct symbols " >what's pci!_PCI_DEVICE ? > The extension appears to be trying to dump data structures that are not available from the public symbols. This is a bit of a bug in the extension. It probably works just fine inside microsoft. ===================== Mark Roddy DDK MVP Windows Vista/2003/XP/2000 Consulting Device and Filesystem Drivers Hollis Technology Solutions 603-321-1032 www.hollistech.com
From: Doron Holan [MS] on 18 Apr 2006 22:32 what is your .sympath? d -- Please do not send e-mail directly to this alias. this alias is for newsgroup purposes only. This posting is provided "AS IS" with no warranties, and confers no rights. "adidas" <adidas(a)hotmail.com> wrote in message news:OkzcJ3sYGHA.3328(a)TK2MSFTNGP02.phx.gbl... i want to use !devext. my box is xp pro (no service pack). but it claims that "Your debugger is not using the correct symbols " what's pci!_PCI_DEVICE ? TIA !devnode 0 1 ... DevNode 0x81fa0298 for PDO 0x81fd8a60 InstancePath is "PCI\VEN_8086&DEV_24C3&SUBSYS_24C28086&REV_02\3&13c0b0c5&0&FB" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x81fa0178 for PDO 0x81fd8718 InstancePath is "PCI\VEN_8086&DEV_24C5&SUBSYS_4730414C&REV_02\3&13c0b0c5&0&FD" ServiceName is "ALCXWDM" TargetDeviceNotify List - f 0xe213e548 b 0xe213e548 State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) ... !devobj 81fd8a60 Device object (81fd8a60) is for: NTPNP_PCI0009 \Driver\PCI DriverObject 81fd7bf8 Current Irp 00000000 RefCount 0 Type 00000022 Flags 00001040 Dacl e12cc584 DevExt 81fd8b18 DevObjExt 81fd8bf0 DevNode 81fa0298 ExtensionFlags (0x00000010) DOE_START_PENDING AttachedDevice (Upper) 81fa0e00 \Driver\ACPI Device queue is not busy. !devext 81fd8b18 PCI and it gives me the following: ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!_PCI_DEVICE *** *** *** ************************************************************************* PDO Extension, Bus 0x0, Device 1f, Function 3. DevObj 0x81fd8a60 PCI Parent Bus FDO DevExt 0x81f8d8d0 Device State = PciNotStarted Vendor ID 8086 (INTEL) Device ID 24C3 Subsystem Vendor ID 8086 (INTEL) Subsystem ID 24C2 Class Base/Sub 0c/05 (Serial Bus Controller/Unknown Sub Class) Programming Interface: 00, Revision: 02, IntPin: 02, Line Raw/Adj 09/09 Enables ((cmd & 7) = 1): I Capabilities Pointer = <none> ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_PDO_EXTENSION *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_POWER_STATE *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_POWER_STATE *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_POWER_STATE *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_POWER_STATE *** *** *** ************************************************************************* CurrentState: System Unspecified, Device Unspecified WakeLevel: System Unspecified, Device Unspecified ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_POWER_STATE *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_POWER_STATE *** *** *** ************************************************************************* Requirements: Alignment Length Minimum Maximum ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_FUNCTION_RESOURCES *** *** *** ************************************************************************* Current: <none> ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!_PCI_PDO_EXTENSION *** *** *** ************************************************************************* Secondary Extensions ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pci!PCI_SECONDARY_EXTENSION *** *** *** ************************************************************************* Unknown Extension Type.
From: adidas on 18 Apr 2006 22:47 >what is your .sympath? Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
|
Pages: 1 Prev: USB controlling Next: USB 2.0 Isochronous driver - high speed |