/usr/ports/print/hplip3
in [Ports]
|
Prev: Fw: VirtualBox coredump on FreeBSD 8 during build
Next: koffice-kde4-2.1.0_2 Install error - Unknown media type
From: Adam Vande More on 10 Mar 2010 18:47 /usr/ports/print/hplip3 The message in this port indicates you must recompile your kernel for it to work. > The printer MUST attach as a ugen(4) device. This means > that you must NOT have "device ulpt" in your kernel and > ulpt must NOT be loaded as a kernel module. That is not the experience that I have had with the port, although I had to bork with the permissions to get it working. The devfs.rules instructions were not adequate to make it work. lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen0.1 -> usb/0.1.0 lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen0.2 -> usb/0.2.0 lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen0.3 -> usb/0.3.0 lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen1.1 -> usb/1.1.0 lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen1.2 -> usb/1.2.0 lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen1.3 -> usb/1.3.0 crwxrwxrwx 1 joe cups 0, 76 Mar 9 20:45 ulpt0 > usbconfig list ugen0.1: <OHCI root HUB nVidia> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen1.1: <EHCI root HUB nVidia> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen1.2: <Deskjet D1600 series HP> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen0.2: <USB AUDIO vendor 0x1130> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen1.3: <USB2.0-CRW Generic> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen0.3: <USB Receiver Logitech> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON I under the permissions here are excessive, but it's unclear from the cups log as how exactly cups is communicating with the printer. It states the connection is made to hp:/usb/Deskjet_D1600_series?serial=CN012C90C405CT -- Adam Vande More _______________________________________________ freebsd-ports(a)freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscribe(a)freebsd.org"
From: Torfinn Ingolfsen on 11 Mar 2010 13:20
On Thu, Mar 11, 2010 at 12:47 AM, Adam Vande More <amvandemore(a)gmail.com>wrote: > /usr/ports/print/hplip3 > > The message in this port indicates you must recompile your kernel for it to > work. > That was true until FreeBSD 8 and the new usb stack came along. With the new usb stack, all devices have a ugen device (in addition to whatever other devoces they might have), if my understanding is correct. > > The printer MUST attach as a ugen(4) device. This means > > that you must NOT have "device ulpt" in your kernel and > > ulpt must NOT be loaded as a kernel module. > > That is not the experience that I have had with the port, although I had to > bork with the permissions to get it working. The devfs.rules instructions > were not adequate to make it work. > > lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen0.1 -> usb/0.1.0 > lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen0.2 -> usb/0.2.0 > lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen0.3 -> usb/0.3.0 > lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen1.1 -> usb/1.1.0 > lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen1.2 -> usb/1.2.0 > lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen1.3 -> usb/1.3.0 > crwxrwxrwx 1 joe cups 0, 76 Mar 9 20:45 ulpt0 > > > usbconfig list > ugen0.1: <OHCI root HUB nVidia> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) > pwr=ON > ugen1.1: <EHCI root HUB nVidia> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=ON > ugen1.2: <Deskjet D1600 series HP> at usbus1, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=ON > ugen0.2: <USB AUDIO vendor 0x1130> at usbus0, cfg=0 md=HOST spd=FULL > (12Mbps) pwr=ON > ugen1.3: <USB2.0-CRW Generic> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=ON > ugen0.3: <USB Receiver Logitech> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) > pwr=ON > > I under the permissions here are excessive, but it's unclear from the cups > log as how exactly cups is communicating with the printer. > > It states the connection is made to > hp:/usb/Deskjet_D1600_series?serial=CN012C90C405CT > > -- > Adam Vande More > _______________________________________________ > freebsd-ports(a)freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-ports > To unsubscribe, send any mail to "freebsd-ports-unsubscribe(a)freebsd.org" > HTH -- Regards, Torfinn Ingolfsen _______________________________________________ freebsd-ports(a)freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscribe(a)freebsd.org" |