/usr/ports/x11-toolkits/qt33: /usr/bin/ld: warning: libjpeg.so.10, needed by /usr/local/lib/libqt-mt.so, not found(try using -rpath or -rpath-link)
in [Ports]
|
Prev: net/samba34 does not create all required directories
Next: samba34 fails building on FreeBSD 8.0-STABLE: Compilinglib/memcache.c, lib/memcache.c:29: error: expectedspecifier-qualifier-list before 'uint8'
From: Ion-Mihai Tetcu on 6 Feb 2010 05:58 On Sat, 6 Feb 2010 12:49:52 +0200 Ion-Mihai Tetcu <itetcu(a)FreeBSD.org> wrote: > On Sat, 06 Feb 2010 11:13:08 +0100 > "O. Hartmann" <ohartman(a)mail.zedat.fu-berlin.de> wrote: > > > Since yesterday's portsnape and attempt updating my ports, ALL > > FreeBSD boxes (running FreeBSD 8.0/amd64) fail to update ports via > > 'portmaster -av' at the same point with the following error. > > > > It seems that that port jpeg-8 has been updated and now offering > > libjpeg.so.11 instead of the desired old libjpeg.so.10, so I guess > > everything depending on port jpeg-8 needs to be rebuild - but > > ports/UPDATE does not reflect this. > > > > c++ -fno-exceptions -Wl,-rpath,/usr/local/lib > > -Wl,-rpath,/usr/local/lib -pthread -o ../../../bin/uic > > .obj/release-shared-mt/main.o .obj/release-shared-mt/uic.o > > .obj/release-shared-mt/form.o .obj/release-shared-mt/object.o > > .obj/release-shared-mt/subclassing.o .obj/release-shared-mt/embed.o > > .obj/release-shared-mt/widgetdatabase.o > > .obj/release-shared-mt/domtool.o .obj/release-shared-mt/parser.o > > -L/usr/local/lib -L/usr/local/lib > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > > > -L/usr/ports/x11-toolkits/qt33/work/qt-x11-free-3.3.8/lib > > -L/usr/local/lib -lqt-mt -lmng -ljpeg -lpng -lz -lXi -lXrender > > -lXrandr -lXcursor -lXinerama -lXft -lfreetype -lfontconfig -lXext > > -lX11 -lm -lSM -lICE > > /usr/bin/ld: warning: libjpeg.so.10, needed by > > /usr/local/lib/libqt-mt.so, not found (try using -rpath or > > -rpath-link) /usr/local/lib/libqt-mt.so: undefined reference to > > `jpeg_start_decompress(a)LIBJPEG_7.0' > > > That above it's the problem, kde team is aware of it. > > For the moment the workaround, when you get to this, is to: > mv /usr/local/lib/libqt-mt.so /usr/local/lib/libqt-mt.so.old && \ > cd /usr/ports/x11-toolkits/qt33/ && make && \ > mv /usr/local/lib/libqt-mt.so.old /usr/local/lib/libqt-mt.so && \ > portmaster -C x11-toolkits/qt33 > > > I did this yesterday while under KDE3 without problems. You'll run into the same kind of problem with kdelibs3: Making all in dnssd gmake[2]: Entering directory `/usr/home/itetcu/wrk/usr/ports/x11/kdelibs3/work/kdelibs-3.5.10/dnssd' .../kdecore/kconfig_compiler/kconfig_compiler ./kcm_kdnssd.kcfg ./settings.kcfgc; ret=$?; \ if test "$ret" != 0; then rm -f settings.h ; exit $ret ; fi /libexec/ld-elf.so.1: Shared object "libjpeg.so.10" not found, required by "libkdefx.so.6" gmake[2]: *** [settings.h] Error 1 gmake[2]: Leaving directory `/usr/home/itetcu/wrk/usr/ports/x11/kdelibs3/work/kdelibs-3.5.10/dnssd' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/usr/home/itetcu/wrk/usr/ports/x11/kdelibs3/work/kdelibs-3.5.10' gmake: *** [all] Error 2 *** Error code 1 Stop in /usr/ports/x11/kdelibs3. The same workaround works. And yes, this means the kde ports are in wrong. -- IOnut - Un^d^dregistered ;) FreeBSD "user" "Intellectual Property" is nowhere near as valuable as "Intellect" FreeBSD committer -> itetcu(a)FreeBSD.org, PGP Key ID 057E9F8B493A297B
From: Leslie Jensen on 7 Feb 2010 07:36 2010-02-06 11:58, Ion-Mihai Tetcu skrev: > On Sat, 6 Feb 2010 12:49:52 +0200 > Ion-Mihai Tetcu<itetcu(a)FreeBSD.org> wrote: > >> On Sat, 06 Feb 2010 11:13:08 +0100 >> "O. Hartmann"<ohartman(a)mail.zedat.fu-berlin.de> wrote: >> >>> Since yesterday's portsnape and attempt updating my ports, ALL >>> FreeBSD boxes (running FreeBSD 8.0/amd64) fail to update ports via >>> 'portmaster -av' at the same point with the following error. >>> >>> It seems that that port jpeg-8 has been updated and now offering >>> libjpeg.so.11 instead of the desired old libjpeg.so.10, so I guess >>> everything depending on port jpeg-8 needs to be rebuild - but >>> ports/UPDATE does not reflect this. >>> >>> c++ -fno-exceptions -Wl,-rpath,/usr/local/lib >>> -Wl,-rpath,/usr/local/lib -pthread -o ../../../bin/uic >>> .obj/release-shared-mt/main.o .obj/release-shared-mt/uic.o >>> .obj/release-shared-mt/form.o .obj/release-shared-mt/object.o >>> .obj/release-shared-mt/subclassing.o .obj/release-shared-mt/embed.o >>> .obj/release-shared-mt/widgetdatabase.o >>> .obj/release-shared-mt/domtool.o .obj/release-shared-mt/parser.o >>> -L/usr/local/lib -L/usr/local/lib >> >> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ >> >>> -L/usr/ports/x11-toolkits/qt33/work/qt-x11-free-3.3.8/lib >>> -L/usr/local/lib -lqt-mt -lmng -ljpeg -lpng -lz -lXi -lXrender >>> -lXrandr -lXcursor -lXinerama -lXft -lfreetype -lfontconfig -lXext >>> -lX11 -lm -lSM -lICE >>> /usr/bin/ld: warning: libjpeg.so.10, needed by >>> /usr/local/lib/libqt-mt.so, not found (try using -rpath or >>> -rpath-link) /usr/local/lib/libqt-mt.so: undefined reference to >>> `jpeg_start_decompress(a)LIBJPEG_7.0' >> >> >> That above it's the problem, kde team is aware of it. >> >> For the moment the workaround, when you get to this, is to: >> mv /usr/local/lib/libqt-mt.so /usr/local/lib/libqt-mt.so.old&& \ >> cd /usr/ports/x11-toolkits/qt33/&& make&& \ >> mv /usr/local/lib/libqt-mt.so.old /usr/local/lib/libqt-mt.so&& \ >> portmaster -C x11-toolkits/qt33 >> >> >> I did this yesterday while under KDE3 without problems. > > You'll run into the same kind of problem with kdelibs3: > > > Making all in dnssd > gmake[2]: Entering directory `/usr/home/itetcu/wrk/usr/ports/x11/kdelibs3/work/kdelibs-3.5.10/dnssd' > ../kdecore/kconfig_compiler/kconfig_compiler ./kcm_kdnssd.kcfg ./settings.kcfgc; ret=$?; \ > if test "$ret" != 0; then rm -f settings.h ; exit $ret ; fi > /libexec/ld-elf.so.1: Shared object "libjpeg.so.10" not found, required by "libkdefx.so.6" > gmake[2]: *** [settings.h] Error 1 > gmake[2]: Leaving directory `/usr/home/itetcu/wrk/usr/ports/x11/kdelibs3/work/kdelibs-3.5.10/dnssd' > gmake[1]: *** [all-recursive] Error 1 > gmake[1]: Leaving directory `/usr/home/itetcu/wrk/usr/ports/x11/kdelibs3/work/kdelibs-3.5.10' > gmake: *** [all] Error 2 > *** Error code 1 > > Stop in /usr/ports/x11/kdelibs3. > > > The same workaround works. > > And yes, this means the kde ports are in wrong. > > I've tried this and I couldn't make it work! I then decided to remove the ports arts, kdelibs3, qt33 and k3b with pkg_deinstall, because these are the only ones installed that are affected of the above problem. I also did make clean for these ports. Even so, when I start installing qt33 again the same problem comes up. Do you have any suggestions on how I should do to make it work? Thanks /Leslie _______________________________________________ freebsd-ports(a)freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscribe(a)freebsd.org"
From: Leslie Jensen on 8 Feb 2010 02:44
2010-02-07 15:37, Ion-Mihai Tetcu skrev: > On Sun, 07 Feb 2010 13:36:55 +0100 > Leslie Jensen<leslie(a)eskk.nu> wrote: > > [ .. ] > >>>> For the moment the workaround, when you get to this, is to: >>>> mv /usr/local/lib/libqt-mt.so /usr/local/lib/libqt-mt.so.old&& \ >>>> cd /usr/ports/x11-toolkits/qt33/&& make&& \ >>>> mv /usr/local/lib/libqt-mt.so.old /usr/local/lib/libqt-mt.so&& \ >>>> portmaster -C x11-toolkits/qt33 >>>> >>>> >>>> I did this yesterday while under KDE3 without problems. >>> >>> You'll run into the same kind of problem with kdelibs3: >>> >>> >>> Making all in dnssd >>> gmake[2]: Entering directory >>> `/usr/home/itetcu/wrk/usr/ports/x11/kdelibs3/work/kdelibs-3.5.10/dnssd' ../kdecore/kconfig_compiler/kconfig_compiler ./kcm_kdnssd.kcfg ./settings.kcfgc; >>> ret=$?; \ if test "$ret" != 0; then rm -f settings.h ; exit $ret ; >>> fi /libexec/ld-elf.so.1: Shared object "libjpeg.so.10" not found, >>> required by "libkdefx.so.6" gmake[2]: *** [settings.h] Error 1 >>> gmake[2]: Leaving directory >>> `/usr/home/itetcu/wrk/usr/ports/x11/kdelibs3/work/kdelibs-3.5.10/dnssd' >>> gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory >>> `/usr/home/itetcu/wrk/usr/ports/x11/kdelibs3/work/kdelibs-3.5.10' >>> gmake: *** [all] Error 2 *** Error code 1 >>> >>> Stop in /usr/ports/x11/kdelibs3. >>> >>> >>> The same workaround works. >>> >>> And yes, this means the kde ports are in wrong. >>> >>> >> >> I've tried this and I couldn't make it work! I then decided to remove >> the ports arts, kdelibs3, qt33 and k3b with pkg_deinstall, because >> these are the only ones installed that are affected of the above >> problem. I also did make clean for these ports. Even so, when I start >> installing qt33 again the same problem comes up. Do you have any >> suggestions on how I should do to make it work? > > Please send the make output with the failure, and pkg_info -Ia. > When I run the command I get this pkg_info -Ia > pkg_info_100208.txt pkg_info: corrupted record (pkgdep line without argument), ignoring pkg_info: corrupted record (pkgdep line without argument), ignoring pkg_info: corrupted record (pkgdep line without argument), ignoring Probably because the ports deinstalled are dependencies of openoffice! When running portmaster --check-depends it complains about x11-toolkits/qt33 audio/arts x11/kdelibs3 Please see attached file! Make output: /usr/bin/ld: warning: libjpeg.so.10, needed by /usr/local/lib/libmng.so, not found (try using -rpath or -rpath-link) /usr/local/lib/libmng.so: undefined reference to `jpeg_start_decompress(a)LIBJPEG_7.0' /usr/local/lib/libmng.so: undefined reference to `jpeg_input_complete(a)LIBJPEG_7.0' /usr/local/lib/libmng.so: undefined reference to `jpeg_start_output(a)LIBJPEG_7.0' /usr/local/lib/libmng.so: undefined reference to `jpeg_resync_to_restart(a)LIBJPEG_7.0' /usr/local/lib/libmng.so: undefined reference to `jpeg_read_scanlines(a)LIBJPEG_7.0' /usr/local/lib/libmng.so: undefined reference to `jpeg_finish_decompress(a)LIBJPEG_7.0' /usr/local/lib/libmng.so: undefined reference to `jpeg_read_header(a)LIBJPEG_7.0' /usr/local/lib/libmng.so: undefined reference to `jpeg_CreateDecompress(a)LIBJPEG_7.0' /usr/local/lib/libmng.so: undefined reference to `jpeg_has_multiple_scans(a)LIBJPEG_7.0' /usr/local/lib/libmng.so: undefined reference to `jpeg_std_error(a)LIBJPEG_7.0' /usr/local/lib/libmng.so: undefined reference to `jpeg_destroy_compress(a)LIBJPEG_7.0' /usr/local/lib/libmng.so: undefined reference to `jpeg_destroy_decompress(a)LIBJPEG_7.0' /usr/local/lib/libmng.so: undefined reference to `jpeg_finish_output(a)LIBJPEG_7.0' *** Error code 1 Stop in /usr/ports/x11-toolkits/qt33/work/qt-x11-free-3.3.8/tools/designer/uic. *** Error code 1 Stop in /usr/ports/x11-toolkits/qt33/work/qt-x11-free-3.3.8/tools/designer/uic. *** Error code 1 Stop in /usr/ports/x11-toolkits/qt33/work/qt-x11-free-3.3.8/tools/designer. *** Error code 1 Stop in /usr/ports/x11-toolkits/qt33/work/qt-x11-free-3.3.8/tools. *** Error code 1 Stop in /usr/ports/x11-toolkits/qt33/work/qt-x11-free-3.3.8. *** Error code 1 Stop in /usr/ports/x11-toolkits/qt33. *** Error code 1 Stop in /usr/ports/x11-toolkits/qt33. Thanks :-) /Leslie |