Prev: Cisco 7911 IP Phone with CCME 4 problem
Next: 2950 Error
From: g18c on 19 Sep 2006 05:49
> if you do not need to carry different VLANS on the port (as you mentioned,
> all ports will be in the same VLAN), you should remove all trunking
> configuration from both switches on that port, and configure the port with
> the same VLAN. Just configure the port 47 as an access port with your "hosts
> PCs VLAN", and configure all ports (including your uplink) with the same
> VLAN in your "switch B".

Ok thanks for the reply. Thats what i want. Ok so question is i moved
from port 47 to a normal access port on VLAN 3 from switch A, and
connected to a port on switch B. i think by default all ports are VLAN1
from factory settings.

Now since no vlan information is passed over a standard access port how
is the switch complaining? is it the CDP protocol and a warning poping
up? ill reconfigure all ports as suggested.

Thanks,

Chris

First  |  Prev  | 
Pages: 1 2
Prev: Cisco 7911 IP Phone with CCME 4 problem
Next: 2950 Error