From: Bret Cahill on
Just start subtracting cycles. Below 25% - 40% power it'll start to
flicker.


Bret Cahill


From: John Larkin on
On Wed, 24 Mar 2010 17:06:18 -0700 (PDT), Bret Cahill
<BretCahill(a)peoplepc.com> wrote:

>Just start subtracting cycles. Below 25% - 40% power it'll start to
>flicker.
>
>
>Bret Cahill
>

Subtracting cycles?

John

From: David Eather on
On 25/03/2010 10:16 AM, John Larkin wrote:
> On Wed, 24 Mar 2010 17:06:18 -0700 (PDT), Bret Cahill
> <BretCahill(a)peoplepc.com> wrote:
>
>> Just start subtracting cycles. Below 25% - 40% power it'll start to
>> flicker.
>>
>>
>> Bret Cahill
>>
>
> Subtracting cycles?
>
> John
>
MOC3041 + triac + variable duty cycle pulse train perhaps?
From: petrus bitbyter on

"David Eather" <eather(a)tpg.com.au> schreef in bericht
news:wo-dnV1AQs8-3jbWnZ2dnUVZ_tyrnZ2d(a)supernews.com...
> On 25/03/2010 10:16 AM, John Larkin wrote:
>> On Wed, 24 Mar 2010 17:06:18 -0700 (PDT), Bret Cahill
>> <BretCahill(a)peoplepc.com> wrote:
>>
>>> Just start subtracting cycles. Below 25% - 40% power it'll start to
>>> flicker.
>>>
>>>
>>> Bret Cahill
>>>
>>
>> Subtracting cycles?
>>
>> John
>>
> MOC3041 + triac + variable duty cycle pulse train perhaps?


Don't think so. Using phase control the tube will not ignite below a certain
voltage. As that limit is not sharply defined and there will always be some
noise on the mains the tube starts to flicker.

petrus bitbyter


From: Bret Cahill on
> >Just start subtracting cycles.  Below 25% - 40% power it'll start to
> >flicker.
>
> >Bret Cahill
>
> Subtracting cycles?

Instead of flashing 60 or 120 Hz it only flashes 30 or 60 cycles/sec.

Eventually everyone will go to LED which is easy to operate at half
power: add a half bridge rectifier.

Lighting still requires a significant amount of power but it will be
pain free reducing this cost.


Bret Cahill