Prev: Free Busy connector fails and service shutting down automatically
Next: event id 1025 with Error: 0xfffff9bf
From: markm75 on 11 Jun 2007 22:47
On Jun 11, 10:26 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
wrote:
> I figured that was what would happen. It could be a few things:
>
> 1. A damaged e00.chk
>
> 2. Runiing eseutil against log files that were created pre 2003 SP1
>
> 3. One of the logs has the same version as edb.log. This would be my bet.
> Run eseutil /ml against edb.log, then delete all the logs that are equal or
> higher than e00.chk. There will be some loss ( all the logs equal or higher
> than edb.log) but your is will start and the stores will mount.
>
> "markm75" <markm...(a)msn.com> wrote in message
>
> news:1181611040.378234.205240(a)n15g2000prd.googlegroups.com...
>
>
>
> > On Jun 11, 3:11 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> > wrote:
> >> It sounds a lot like a miising log or a bad log generation. I'd do the
> >> /ml
> >> to check the inegrity of the logs.
>
> >> "markm75" <markm...(a)msn.com> wrote in message
>
> >>news:1181586793.602557.84450(a)k79g2000hse.googlegroups.com...
>
> >> > On Jun 11, 2:23 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> >> > wrote:
> >> >> The logs are still there... did you test the integrity of the
> >> >> transaction
> >> >> logs with eseutil /ml?
>
> >> >> "markm75" <markm...(a)msn.com> wrote in message
>
> >> >>news:1181576925.172289.318250(a)h2g2000hsg.googlegroups.com...
>
> >> >> > On Jun 11, 11:12 am, "Lanwench [MVP - Exchange]"
> >> >> > <lanwe...(a)heybuddy.donotsendme.unsolicitedmailatyahoo.com> wrote:
> >> >> >> markm75 <markm...(a)msn.com> wrote:
> >> >> >> > I'm receiving eventid 214: Information Store (3396) First
> >> >> >> > Storage
> >> >> >> > Group: The backup has stopped with error -521. In the event
> >> >> >> > viewer,
> >> >> >> > while the backup log itself shows this error:
>
> >> >> >> > The 'Microsoft Information Store' returned 'Error returned from
> >> >> >> > an
> >> >> >> > ESE
> >> >> >> > function call (d).
>
> >> >> >> > ' from a call to 'HrESEBackupSetup()' additional data '-'The
> >> >> >> > 'Microsoft Information Store' returned 'Functions called in an
> >> >> >> > invalid
> >> >> >> > sequence.
>
> >> >> >> > ' from a call to 'HrESEBackupClose()' additional data '-'
>
> >> >> >> > This occurs for a full backup.
>
> >> >> >> > I recently had a crashed and corrupted Exchange 2003 sp2 server,
> >> >> >> > which
> >> >> >> > i ran eseutil /p on each database. All of the logs are still in
> >> >> >> > the
> >> >> >> > folder dating back to when it crashed.
>
> >> >> >> > I'm assuming I cant just delete these transaction log files and
> >> >> >> > start
> >> >> >> > fresh?
>
> >> >> >> > Is there some sort of workaround for this error?
>
> >> >> >> > Thanks for any help
>
> >> >> >> This can occur when you're backing up system state in the same
> >> >> >> job -http://support.microsoft.com/kb/820272
>
> >> >> >> (btw, that was the result of a very quick google search; it's
> >> >> >> always
> >> >> >> good
> >> >> >> to
> >> >> >> google before posting).- Hide quoted text -
>
> >> >> >> - Show quoted text -
>
> >> >> > I am not backing up the system state in the same job... And yes I
> >> >> > have
> >> >> > googled this, only to find one other article which may not even
> >> >> > pertain.
>
> >> >> > Thanks- Hide quoted text -
>
> >> >> - Show quoted text -
>
> >> > Hadnt tried that one yet.
>
> >> > I did the eseutil /p on the priv1.edb, which took like 15 hours to
> >> > complete (there were lots of errors previously).
>
> >> > I'm guessing i need to run eseutil /d as well as isinteg -fix -tests
> >> > alltests as well?
>
> >> > I hadnt heard of the /ml swich, ill have to wait till this evening to
> >> > try this one, as i guess the store must be offline (i'm hoping it
> >> > doesnt take 15 hours to complete).
>
> >> > Thanks- Hide quoted text -
>
> >> - Show quoted text -
>
> > I ran that command.. but received this error:
>
> > Operation terminated with error -514 (JET_errBadLogVersion, Version of
> > log file
> > is not compatible with Jet version) after 1.47 seconds.- Hide quoted text -
>
> - Show quoted text -


These logs should have all been created at SP2.. or so i thought,
unless somewhere along the way when i did the restore.. it was in a
pre sp2 state for a brief moment.

I dont seem to have a file titled edb.log..

i have res1 and res2.log.. as well as E0010***.log (multiple ones)...

Thanks again

From: markm75 on 11 Jun 2007 23:26
On Jun 11, 10:47 pm, markm75 <markm...(a)msn.com> wrote:
> On Jun 11, 10:26 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> wrote:
>
>
>
>
>
> > I figured that was what would happen. It could be a few things:
>
> > 1. A damaged e00.chk
>
> > 2. Runiing eseutil against log files that were created pre 2003 SP1
>
> > 3. One of the logs has the same version as edb.log. This would be my bet.
> > Run eseutil /ml against edb.log, then delete all the logs that are equal or
> > higher than e00.chk. There will be some loss ( all the logs equal or higher
> > than edb.log) but your is will start and the stores will mount.
>
> > "markm75" <markm...(a)msn.com> wrote in message
>
> >news:1181611040.378234.205240(a)n15g2000prd.googlegroups.com...
>
> > > On Jun 11, 3:11 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> > > wrote:
> > >> It sounds a lot like a miising log or a bad log generation. I'd do the
> > >> /ml
> > >> to check the inegrity of the logs.
>
> > >> "markm75" <markm...(a)msn.com> wrote in message
>
> > >>news:1181586793.602557.84450(a)k79g2000hse.googlegroups.com...
>
> > >> > On Jun 11, 2:23 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> > >> > wrote:
> > >> >> The logs are still there... did you test the integrity of the
> > >> >> transaction
> > >> >> logs with eseutil /ml?
>
> > >> >> "markm75" <markm...(a)msn.com> wrote in message
>
> > >> >>news:1181576925.172289.318250(a)h2g2000hsg.googlegroups.com...
>
> > >> >> > On Jun 11, 11:12 am, "Lanwench [MVP - Exchange]"
> > >> >> > <lanwe...(a)heybuddy.donotsendme.unsolicitedmailatyahoo.com> wrote:
> > >> >> >> markm75 <markm...(a)msn.com> wrote:
> > >> >> >> > I'm receiving eventid 214: Information Store (3396) First
> > >> >> >> > Storage
> > >> >> >> > Group: The backup has stopped with error -521. In the event
> > >> >> >> > viewer,
> > >> >> >> > while the backup log itself shows this error:
>
> > >> >> >> > The 'Microsoft Information Store' returned 'Error returned from
> > >> >> >> > an
> > >> >> >> > ESE
> > >> >> >> > function call (d).
>
> > >> >> >> > ' from a call to 'HrESEBackupSetup()' additional data '-'The
> > >> >> >> > 'Microsoft Information Store' returned 'Functions called in an
> > >> >> >> > invalid
> > >> >> >> > sequence.
>
> > >> >> >> > ' from a call to 'HrESEBackupClose()' additional data '-'
>
> > >> >> >> > This occurs for a full backup.
>
> > >> >> >> > I recently had a crashed and corrupted Exchange 2003 sp2 server,
> > >> >> >> > which
> > >> >> >> > i ran eseutil /p on each database. All of the logs are still in
> > >> >> >> > the
> > >> >> >> > folder dating back to when it crashed.
>
> > >> >> >> > I'm assuming I cant just delete these transaction log files and
> > >> >> >> > start
> > >> >> >> > fresh?
>
> > >> >> >> > Is there some sort of workaround for this error?
>
> > >> >> >> > Thanks for any help
>
> > >> >> >> This can occur when you're backing up system state in the same
> > >> >> >> job -http://support.microsoft.com/kb/820272
>
> > >> >> >> (btw, that was the result of a very quick google search; it's
> > >> >> >> always
> > >> >> >> good
> > >> >> >> to
> > >> >> >> google before posting).- Hide quoted text -
>
> > >> >> >> - Show quoted text -
>
> > >> >> > I am not backing up the system state in the same job... And yes I
> > >> >> > have
> > >> >> > googled this, only to find one other article which may not even
> > >> >> > pertain.
>
> > >> >> > Thanks- Hide quoted text -
>
> > >> >> - Show quoted text -
>
> > >> > Hadnt tried that one yet.
>
> > >> > I did the eseutil /p on the priv1.edb, which took like 15 hours to
> > >> > complete (there were lots of errors previously).
>
> > >> > I'm guessing i need to run eseutil /d as well as isinteg -fix -tests
> > >> > alltests as well?
>
> > >> > I hadnt heard of the /ml swich, ill have to wait till this evening to
> > >> > try this one, as i guess the store must be offline (i'm hoping it
> > >> > doesnt take 15 hours to complete).
>
> > >> > Thanks- Hide quoted text -
>
> > >> - Show quoted text -
>
> > > I ran that command.. but received this error:
>
> > > Operation terminated with error -514 (JET_errBadLogVersion, Version of
> > > log file
> > > is not compatible with Jet version) after 1.47 seconds.- Hide quoted text -
>
> > - Show quoted text -
>
> These logs should have all been created at SP2.. or so i thought,
> unless somewhere along the way when i did the restore.. it was in a
> pre sp2 state for a brief moment.
>
> I dont seem to have a file titled edb.log..
>
> i have res1 and res2.log.. as well as E0010***.log (multiple ones)...
>
> Thanks again- Hide quoted text -
>
> - Show quoted text -

I'm also getting that the log file is corrupt if i run /ml on e00.log


From: markm75 on 11 Jun 2007 23:37
On Jun 11, 10:47 pm, markm75 <markm...(a)msn.com> wrote:
> On Jun 11, 10:26 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> wrote:
>
>
>
>
>
> > I figured that was what would happen. It could be a few things:
>
> > 1. A damaged e00.chk
>
> > 2. Runiing eseutil against log files that were created pre 2003 SP1
>
> > 3. One of the logs has the same version as edb.log. This would be my bet.
> > Run eseutil /ml against edb.log, then delete all the logs that are equal or
> > higher than e00.chk. There will be some loss ( all the logs equal or higher
> > than edb.log) but your is will start and the stores will mount.
>
> > "markm75" <markm...(a)msn.com> wrote in message
>
> >news:1181611040.378234.205240(a)n15g2000prd.googlegroups.com...
>
> > > On Jun 11, 3:11 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> > > wrote:
> > >> It sounds a lot like a miising log or a bad log generation. I'd do the
> > >> /ml
> > >> to check the inegrity of the logs.
>
> > >> "markm75" <markm...(a)msn.com> wrote in message
>
> > >>news:1181586793.602557.84450(a)k79g2000hse.googlegroups.com...
>
> > >> > On Jun 11, 2:23 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> > >> > wrote:
> > >> >> The logs are still there... did you test the integrity of the
> > >> >> transaction
> > >> >> logs with eseutil /ml?
>
> > >> >> "markm75" <markm...(a)msn.com> wrote in message
>
> > >> >>news:1181576925.172289.318250(a)h2g2000hsg.googlegroups.com...
>
> > >> >> > On Jun 11, 11:12 am, "Lanwench [MVP - Exchange]"
> > >> >> > <lanwe...(a)heybuddy.donotsendme.unsolicitedmailatyahoo.com> wrote:
> > >> >> >> markm75 <markm...(a)msn.com> wrote:
> > >> >> >> > I'm receiving eventid 214: Information Store (3396) First
> > >> >> >> > Storage
> > >> >> >> > Group: The backup has stopped with error -521. In the event
> > >> >> >> > viewer,
> > >> >> >> > while the backup log itself shows this error:
>
> > >> >> >> > The 'Microsoft Information Store' returned 'Error returned from
> > >> >> >> > an
> > >> >> >> > ESE
> > >> >> >> > function call (d).
>
> > >> >> >> > ' from a call to 'HrESEBackupSetup()' additional data '-'The
> > >> >> >> > 'Microsoft Information Store' returned 'Functions called in an
> > >> >> >> > invalid
> > >> >> >> > sequence.
>
> > >> >> >> > ' from a call to 'HrESEBackupClose()' additional data '-'
>
> > >> >> >> > This occurs for a full backup.
>
> > >> >> >> > I recently had a crashed and corrupted Exchange 2003 sp2 server,
> > >> >> >> > which
> > >> >> >> > i ran eseutil /p on each database. All of the logs are still in
> > >> >> >> > the
> > >> >> >> > folder dating back to when it crashed.
>
> > >> >> >> > I'm assuming I cant just delete these transaction log files and
> > >> >> >> > start
> > >> >> >> > fresh?
>
> > >> >> >> > Is there some sort of workaround for this error?
>
> > >> >> >> > Thanks for any help
>
> > >> >> >> This can occur when you're backing up system state in the same
> > >> >> >> job -http://support.microsoft.com/kb/820272
>
> > >> >> >> (btw, that was the result of a very quick google search; it's
> > >> >> >> always
> > >> >> >> good
> > >> >> >> to
> > >> >> >> google before posting).- Hide quoted text -
>
> > >> >> >> - Show quoted text -
>
> > >> >> > I am not backing up the system state in the same job... And yes I
> > >> >> > have
> > >> >> > googled this, only to find one other article which may not even
> > >> >> > pertain.
>
> > >> >> > Thanks- Hide quoted text -
>
> > >> >> - Show quoted text -
>
> > >> > Hadnt tried that one yet.
>
> > >> > I did the eseutil /p on the priv1.edb, which took like 15 hours to
> > >> > complete (there were lots of errors previously).
>
> > >> > I'm guessing i need to run eseutil /d as well as isinteg -fix -tests
> > >> > alltests as well?
>
> > >> > I hadnt heard of the /ml swich, ill have to wait till this evening to
> > >> > try this one, as i guess the store must be offline (i'm hoping it
> > >> > doesnt take 15 hours to complete).
>
> > >> > Thanks- Hide quoted text -
>
> > >> - Show quoted text -
>
> > > I ran that command.. but received this error:
>
> > > Operation terminated with error -514 (JET_errBadLogVersion, Version of
> > > log file
> > > is not compatible with Jet version) after 1.47 seconds.- Hide quoted text -
>
> > - Show quoted text -
>
> These logs should have all been created at SP2.. or so i thought,
> unless somewhere along the way when i did the restore.. it was in a
> pre sp2 state for a brief moment.
>
> I dont seem to have a file titled edb.log..
>
> i have res1 and res2.log.. as well as E0010***.log (multiple ones)...
>
> Thanks again- Hide quoted text -
>
> - Show quoted text -

I also moved the log files that were giving the backup program fits..
out of the directory and decided to start clean.. so i remounted and
tried the backup, but I still get the same error message.. so even
this hasnt seemed to work unfortunately

From: John Fullbright on 12 Jun 2007 14:41
If e00.chk itself is corrupt, your options are limited.

http://support.microsoft.com/kb/248122/en-us


"markm75" <markm75c(a)msn.com> wrote in message
news:1181619421.541041.259410(a)i38g2000prf.googlegroups.com...
> On Jun 11, 10:47 pm, markm75 <markm...(a)msn.com> wrote:
>> On Jun 11, 10:26 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
>> wrote:
>>
>>
>>
>>
>>
>> > I figured that was what would happen. It could be a few things:
>>
>> > 1. A damaged e00.chk
>>
>> > 2. Runiing eseutil against log files that were created pre 2003 SP1
>>
>> > 3. One of the logs has the same version as edb.log. This would be my
>> > bet.
>> > Run eseutil /ml against edb.log, then delete all the logs that are
>> > equal or
>> > higher than e00.chk. There will be some loss ( all the logs equal or
>> > higher
>> > than edb.log) but your is will start and the stores will mount.
>>
>> > "markm75" <markm...(a)msn.com> wrote in message
>>
>> >news:1181611040.378234.205240(a)n15g2000prd.googlegroups.com...
>>
>> > > On Jun 11, 3:11 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
>> > > wrote:
>> > >> It sounds a lot like a miising log or a bad log generation. I'd do
>> > >> the
>> > >> /ml
>> > >> to check the inegrity of the logs.
>>
>> > >> "markm75" <markm...(a)msn.com> wrote in message
>>
>> > >>news:1181586793.602557.84450(a)k79g2000hse.googlegroups.com...
>>
>> > >> > On Jun 11, 2:23 pm, "John Fullbright"
>> > >> > <fjohn(a)donotspamenetappdotcom>
>> > >> > wrote:
>> > >> >> The logs are still there... did you test the integrity of the
>> > >> >> transaction
>> > >> >> logs with eseutil /ml?
>>
>> > >> >> "markm75" <markm...(a)msn.com> wrote in message
>>
>> > >> >>news:1181576925.172289.318250(a)h2g2000hsg.googlegroups.com...
>>
>> > >> >> > On Jun 11, 11:12 am, "Lanwench [MVP - Exchange]"
>> > >> >> > <lanwe...(a)heybuddy.donotsendme.unsolicitedmailatyahoo.com>
>> > >> >> > wrote:
>> > >> >> >> markm75 <markm...(a)msn.com> wrote:
>> > >> >> >> > I'm receiving eventid 214: Information Store (3396) First
>> > >> >> >> > Storage
>> > >> >> >> > Group: The backup has stopped with error -521. In the event
>> > >> >> >> > viewer,
>> > >> >> >> > while the backup log itself shows this error:
>>
>> > >> >> >> > The 'Microsoft Information Store' returned 'Error returned
>> > >> >> >> > from
>> > >> >> >> > an
>> > >> >> >> > ESE
>> > >> >> >> > function call (d).
>>
>> > >> >> >> > ' from a call to 'HrESEBackupSetup()' additional data '-'The
>> > >> >> >> > 'Microsoft Information Store' returned 'Functions called in
>> > >> >> >> > an
>> > >> >> >> > invalid
>> > >> >> >> > sequence.
>>
>> > >> >> >> > ' from a call to 'HrESEBackupClose()' additional data '-'
>>
>> > >> >> >> > This occurs for a full backup.
>>
>> > >> >> >> > I recently had a crashed and corrupted Exchange 2003 sp2
>> > >> >> >> > server,
>> > >> >> >> > which
>> > >> >> >> > i ran eseutil /p on each database. All of the logs are
>> > >> >> >> > still in
>> > >> >> >> > the
>> > >> >> >> > folder dating back to when it crashed.
>>
>> > >> >> >> > I'm assuming I cant just delete these transaction log files
>> > >> >> >> > and
>> > >> >> >> > start
>> > >> >> >> > fresh?
>>
>> > >> >> >> > Is there some sort of workaround for this error?
>>
>> > >> >> >> > Thanks for any help
>>
>> > >> >> >> This can occur when you're backing up system state in the same
>> > >> >> >> job -http://support.microsoft.com/kb/820272
>>
>> > >> >> >> (btw, that was the result of a very quick google search; it's
>> > >> >> >> always
>> > >> >> >> good
>> > >> >> >> to
>> > >> >> >> google before posting).- Hide quoted text -
>>
>> > >> >> >> - Show quoted text -
>>
>> > >> >> > I am not backing up the system state in the same job... And yes
>> > >> >> > I
>> > >> >> > have
>> > >> >> > googled this, only to find one other article which may not even
>> > >> >> > pertain.
>>
>> > >> >> > Thanks- Hide quoted text -
>>
>> > >> >> - Show quoted text -
>>
>> > >> > Hadnt tried that one yet.
>>
>> > >> > I did the eseutil /p on the priv1.edb, which took like 15 hours to
>> > >> > complete (there were lots of errors previously).
>>
>> > >> > I'm guessing i need to run eseutil /d as well as
>> > >> > isinteg -fix -tests
>> > >> > alltests as well?
>>
>> > >> > I hadnt heard of the /ml swich, ill have to wait till this evening
>> > >> > to
>> > >> > try this one, as i guess the store must be offline (i'm hoping it
>> > >> > doesnt take 15 hours to complete).
>>
>> > >> > Thanks- Hide quoted text -
>>
>> > >> - Show quoted text -
>>
>> > > I ran that command.. but received this error:
>>
>> > > Operation terminated with error -514 (JET_errBadLogVersion, Version
>> > > of
>> > > log file
>> > > is not compatible with Jet version) after 1.47 seconds.- Hide quoted
>> > > text -
>>
>> > - Show quoted text -
>>
>> These logs should have all been created at SP2.. or so i thought,
>> unless somewhere along the way when i did the restore.. it was in a
>> pre sp2 state for a brief moment.
>>
>> I dont seem to have a file titled edb.log..
>>
>> i have res1 and res2.log.. as well as E0010***.log (multiple ones)...
>>
>> Thanks again- Hide quoted text -
>>
>> - Show quoted text -
>
> I also moved the log files that were giving the backup program fits..
> out of the directory and decided to start clean.. so i remounted and
> tried the backup, but I still get the same error message.. so even
> this hasnt seemed to work unfortunately
>


From: markm75 on 12 Jun 2007 15:06
On Jun 12, 2:41 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
wrote:
> If e00.chk itself is corrupt, your options are limited.
>
> http://support.microsoft.com/kb/248122/en-us
>
> "markm75" <markm...(a)msn.com> wrote in message
>
> news:1181619421.541041.259410(a)i38g2000prf.googlegroups.com...
>
>
>
> > On Jun 11, 10:47 pm, markm75 <markm...(a)msn.com> wrote:
> >> On Jun 11, 10:26 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> >> wrote:
>
> >> > I figured that was what would happen. It could be a few things:
>
> >> > 1. A damaged e00.chk
>
> >> > 2. Runiing eseutil againstlogfiles that were created pre 2003 SP1
>
> >> > 3. One of the logs has the sameversionas edb.log. This would be my
> >> > bet.
> >> > Run eseutil /ml against edb.log, then delete all the logs that are
> >> > equal or
> >> > higher than e00.chk. There will be some loss ( all the logs equal or
> >> > higher
> >> > than edb.log) but your is will start and the stores will mount.
>
> >> > "markm75" <markm...(a)msn.com> wrote in message
>
> >> >news:1181611040.378234.205240(a)n15g2000prd.googlegroups.com...
>
> >> > > On Jun 11, 3:11 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> >> > > wrote:
> >> > >> It sounds a lot like a miisinglogor a badloggeneration. I'd do
> >> > >> the
> >> > >> /ml
> >> > >> to check the inegrity of the logs.
>
> >> > >> "markm75" <markm...(a)msn.com> wrote in message
>
> >> > >>news:1181586793.602557.84450(a)k79g2000hse.googlegroups.com...
>
> >> > >> > On Jun 11, 2:23 pm, "John Fullbright"
> >> > >> > <fjohn(a)donotspamenetappdotcom>
> >> > >> > wrote:
> >> > >> >> The logs are still there... did you test the integrity of the
> >> > >> >> transaction
> >> > >> >> logs with eseutil /ml?
>
> >> > >> >> "markm75" <markm...(a)msn.com> wrote in message
>
> >> > >> >>news:1181576925.172289.318250(a)h2g2000hsg.googlegroups.com...
>
> >> > >> >> > On Jun 11, 11:12 am, "Lanwench [MVP - Exchange]"
> >> > >> >> > <lanwe...(a)heybuddy.donotsendme.unsolicitedmailatyahoo.com>
> >> > >> >> > wrote:
> >> > >> >> >> markm75 <markm...(a)msn.com> wrote:
> >> > >> >> >> > I'm receiving eventid 214: Information Store (3396) First
> >> > >> >> >> > Storage
> >> > >> >> >> > Group: The backup has stopped with error -521. In the event
> >> > >> >> >> > viewer,
> >> > >> >> >> > while the backuplogitself shows this error:
>
> >> > >> >> >> > The 'Microsoft Information Store' returned 'Error returned
> >> > >> >> >> > from
> >> > >> >> >> > an
> >> > >> >> >> > ESE
> >> > >> >> >> > function call (d).
>
> >> > >> >> >> > ' from a call to 'HrESEBackupSetup()' additional data '-'The
> >> > >> >> >> > 'Microsoft Information Store' returned 'Functions called in
> >> > >> >> >> > an
> >> > >> >> >> > invalid
> >> > >> >> >> > sequence.
>
> >> > >> >> >> > ' from a call to 'HrESEBackupClose()' additional data '-'
>
> >> > >> >> >> > This occurs for a full backup.
>
> >> > >> >> >> > I recently had a crashed and corrupted Exchange 2003sp2
> >> > >> >> >> > server,
> >> > >> >> >> > which
> >> > >> >> >> > i ran eseutil /p on each database. All of the logs are
> >> > >> >> >> > still in
> >> > >> >> >> > the
> >> > >> >> >> > folder dating back to when it crashed.
>
> >> > >> >> >> > I'm assuming I cant just delete these transactionlogfiles
> >> > >> >> >> > and
> >> > >> >> >> > start
> >> > >> >> >> > fresh?
>
> >> > >> >> >> > Is there some sort of workaround for this error?
>
> >> > >> >> >> > Thanks for any help
>
> >> > >> >> >> This can occur when you're backing up system state in the same
> >> > >> >> >> job -http://support.microsoft.com/kb/820272
>
> >> > >> >> >> (btw, that was the result of a very quick google search; it's
> >> > >> >> >> always
> >> > >> >> >> good
> >> > >> >> >> to
> >> > >> >> >> google before posting).- Hide quoted text -
>
> >> > >> >> >> - Show quoted text -
>
> >> > >> >> > I amnotbacking up the system state in the same job... And yes
> >> > >> >> > I
> >> > >> >> > have
> >> > >> >> > googled this, only to find one other article which maynoteven
> >> > >> >> > pertain.
>
> >> > >> >> > Thanks- Hide quoted text -
>
> >> > >> >> - Show quoted text -
>
> >> > >> > Hadnt tried that one yet.
>
> >> > >> > I did the eseutil /p on the priv1.edb, which took like 15 hours to
> >> > >> > complete (there were lots of errors previously).
>
> >> > >> > I'm guessing i need to run eseutil /d as well as
> >> > >> > isinteg -fix -tests
> >> > >> > alltests as well?
>
> >> > >> > I hadnt heard of the /ml swich, ill have to wait till this evening
> >> > >> > to
> >> > >> > try this one, as i guess the store must be offline (i'm hoping it
> >> > >> > doesnt take 15 hours to complete).
>
> >> > >> > Thanks- Hide quoted text -
>
> >> > >> - Show quoted text -
>
> >> > > I ran that command.. but received this error:
>
> >> > > Operation terminated with error -514 (JET_errBadLogVersion,Version
> >> > > of
> >> > >logfile
> >> > > isnotcompatiblewithJetversion) after 1.47 seconds.- Hide quoted
> >> > > text -
>
> >> > - Show quoted text -
>
> >> These logs should have all been created atSP2.. or so i thought,
> >> unless somewhere along the way when i did the restore.. it was in a
> >> presp2state for a brief moment.
>
> >> I dont seem to have afiletitled edb.log..
>
> >> i have res1 and res2.log.. as well as E0010***.log(multiple ones)...
>
> >> Thanks again- Hide quoted text -
>
> >> - Show quoted text -
>
> > I also moved thelogfiles that were giving the backup program fits..
> > out of the directory and decided to start clean.. so i remounted and
> > tried the backup, but I still get the same error message.. so even
> > this hasnt seemed to work unfortunately- Hide quoted text -
>
> - Show quoted text -

I ran a check on e00.chk.. i get:

Cannot read log file header
Version of log file is not compatible with jet version error -514


First  |  Prev  |  Next  |  Last
Pages: 1 2 3 4
Prev: Free Busy connector fails and service shutting down automatically
Next: event id 1025 with Error: 0xfffff9bf