Prev: Free Busy connector fails and service shutting down automatically
Next: event id 1025 with Error: 0xfffff9bf
From: John Fullbright on 12 Jun 2007 16:17
If you remove the logs and the checkpoint, exchange will create a new
checkpoint file. The checkpoint file controls which logs to replay, so
you'll lose the data in the transaction logs doing this.


"markm75" <markm75c(a)msn.com> wrote in message
news:1181675215.384984.273980(a)z28g2000prd.googlegroups.com...
> On Jun 12, 2:41 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> wrote:
>> If e00.chk itself is corrupt, your options are limited.
>>
>> http://support.microsoft.com/kb/248122/en-us
>>
>> "markm75" <markm...(a)msn.com> wrote in message
>>
>> news:1181619421.541041.259410(a)i38g2000prf.googlegroups.com...
>>
>>
>>
>> > On Jun 11, 10:47 pm, markm75 <markm...(a)msn.com> wrote:
>> >> On Jun 11, 10:26 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
>> >> wrote:
>>
>> >> > I figured that was what would happen. It could be a few things:
>>
>> >> > 1. A damaged e00.chk
>>
>> >> > 2. Runiing eseutil againstlogfiles that were created pre 2003 SP1
>>
>> >> > 3. One of the logs has the sameversionas edb.log. This would be
>> >> > my
>> >> > bet.
>> >> > Run eseutil /ml against edb.log, then delete all the logs that are
>> >> > equal or
>> >> > higher than e00.chk. There will be some loss ( all the logs equal
>> >> > or
>> >> > higher
>> >> > than edb.log) but your is will start and the stores will mount.
>>
>> >> > "markm75" <markm...(a)msn.com> wrote in message
>>
>> >> >news:1181611040.378234.205240(a)n15g2000prd.googlegroups.com...
>>
>> >> > > On Jun 11, 3:11 pm, "John Fullbright"
>> >> > > <fjohn(a)donotspamenetappdotcom>
>> >> > > wrote:
>> >> > >> It sounds a lot like a miisinglogor a badloggeneration. I'd do
>> >> > >> the
>> >> > >> /ml
>> >> > >> to check the inegrity of the logs.
>>
>> >> > >> "markm75" <markm...(a)msn.com> wrote in message
>>
>> >> > >>news:1181586793.602557.84450(a)k79g2000hse.googlegroups.com...
>>
>> >> > >> > On Jun 11, 2:23 pm, "John Fullbright"
>> >> > >> > <fjohn(a)donotspamenetappdotcom>
>> >> > >> > wrote:
>> >> > >> >> The logs are still there... did you test the integrity of the
>> >> > >> >> transaction
>> >> > >> >> logs with eseutil /ml?
>>
>> >> > >> >> "markm75" <markm...(a)msn.com> wrote in message
>>
>> >> > >> >>news:1181576925.172289.318250(a)h2g2000hsg.googlegroups.com...
>>
>> >> > >> >> > On Jun 11, 11:12 am, "Lanwench [MVP - Exchange]"
>> >> > >> >> > <lanwe...(a)heybuddy.donotsendme.unsolicitedmailatyahoo.com>
>> >> > >> >> > wrote:
>> >> > >> >> >> markm75 <markm...(a)msn.com> wrote:
>> >> > >> >> >> > I'm receiving eventid 214: Information Store (3396)
>> >> > >> >> >> > First
>> >> > >> >> >> > Storage
>> >> > >> >> >> > Group: The backup has stopped with error -521. In the
>> >> > >> >> >> > event
>> >> > >> >> >> > viewer,
>> >> > >> >> >> > while the backuplogitself shows this error:
>>
>> >> > >> >> >> > The 'Microsoft Information Store' returned 'Error
>> >> > >> >> >> > returned
>> >> > >> >> >> > from
>> >> > >> >> >> > an
>> >> > >> >> >> > ESE
>> >> > >> >> >> > function call (d).
>>
>> >> > >> >> >> > ' from a call to 'HrESEBackupSetup()' additional data
>> >> > >> >> >> > '-'The
>> >> > >> >> >> > 'Microsoft Information Store' returned 'Functions called
>> >> > >> >> >> > in
>> >> > >> >> >> > an
>> >> > >> >> >> > invalid
>> >> > >> >> >> > sequence.
>>
>> >> > >> >> >> > ' from a call to 'HrESEBackupClose()' additional data '-'
>>
>> >> > >> >> >> > This occurs for a full backup.
>>
>> >> > >> >> >> > I recently had a crashed and corrupted Exchange 2003sp2
>> >> > >> >> >> > server,
>> >> > >> >> >> > which
>> >> > >> >> >> > i ran eseutil /p on each database. All of the logs are
>> >> > >> >> >> > still in
>> >> > >> >> >> > the
>> >> > >> >> >> > folder dating back to when it crashed.
>>
>> >> > >> >> >> > I'm assuming I cant just delete these transactionlogfiles
>> >> > >> >> >> > and
>> >> > >> >> >> > start
>> >> > >> >> >> > fresh?
>>
>> >> > >> >> >> > Is there some sort of workaround for this error?
>>
>> >> > >> >> >> > Thanks for any help
>>
>> >> > >> >> >> This can occur when you're backing up system state in the
>> >> > >> >> >> same
>> >> > >> >> >> job -http://support.microsoft.com/kb/820272
>>
>> >> > >> >> >> (btw, that was the result of a very quick google search;
>> >> > >> >> >> it's
>> >> > >> >> >> always
>> >> > >> >> >> good
>> >> > >> >> >> to
>> >> > >> >> >> google before posting).- Hide quoted text -
>>
>> >> > >> >> >> - Show quoted text -
>>
>> >> > >> >> > I amnotbacking up the system state in the same job... And
>> >> > >> >> > yes
>> >> > >> >> > I
>> >> > >> >> > have
>> >> > >> >> > googled this, only to find one other article which
>> >> > >> >> > maynoteven
>> >> > >> >> > pertain.
>>
>> >> > >> >> > Thanks- Hide quoted text -
>>
>> >> > >> >> - Show quoted text -
>>
>> >> > >> > Hadnt tried that one yet.
>>
>> >> > >> > I did the eseutil /p on the priv1.edb, which took like 15 hours
>> >> > >> > to
>> >> > >> > complete (there were lots of errors previously).
>>
>> >> > >> > I'm guessing i need to run eseutil /d as well as
>> >> > >> > isinteg -fix -tests
>> >> > >> > alltests as well?
>>
>> >> > >> > I hadnt heard of the /ml swich, ill have to wait till this
>> >> > >> > evening
>> >> > >> > to
>> >> > >> > try this one, as i guess the store must be offline (i'm hoping
>> >> > >> > it
>> >> > >> > doesnt take 15 hours to complete).
>>
>> >> > >> > Thanks- Hide quoted text -
>>
>> >> > >> - Show quoted text -
>>
>> >> > > I ran that command.. but received this error:
>>
>> >> > > Operation terminated with error -514 (JET_errBadLogVersion,Version
>> >> > > of
>> >> > >logfile
>> >> > > isnotcompatiblewithJetversion) after 1.47 seconds.- Hide quoted
>> >> > > text -
>>
>> >> > - Show quoted text -
>>
>> >> These logs should have all been created atSP2.. or so i thought,
>> >> unless somewhere along the way when i did the restore.. it was in a
>> >> presp2state for a brief moment.
>>
>> >> I dont seem to have afiletitled edb.log..
>>
>> >> i have res1 and res2.log.. as well as E0010***.log(multiple ones)...
>>
>> >> Thanks again- Hide quoted text -
>>
>> >> - Show quoted text -
>>
>> > I also moved thelogfiles that were giving the backup program fits..
>> > out of the directory and decided to start clean.. so i remounted and
>> > tried the backup, but I still get the same error message.. so even
>> > this hasnt seemed to work unfortunately- Hide quoted text -
>>
>> - Show quoted text -
>
> I ran a check on e00.chk.. i get:
>
> Cannot read log file header
> Version of log file is not compatible with jet version error -514
>
>


From: markm75 on 12 Jun 2007 18:09
On Jun 12, 4:17 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
wrote:
> If you remove the logs and the checkpoint, exchange will create a new
> checkpoint file. The checkpoint file controls which logs to replay, so
> you'll lose the data in the transaction logs doing this.
>
> "markm75" <markm...(a)msn.com> wrote in message
>
> news:1181675215.384984.273980(a)z28g2000prd.googlegroups.com...
>
>
>
> > On Jun 12, 2:41 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> > wrote:
> >> If e00.chk itself is corrupt, your options are limited.
>
> >>http://support.microsoft.com/kb/248122/en-us
>
> >> "markm75" <markm...(a)msn.com> wrote in message
>
> >>news:1181619421.541041.259410(a)i38g2000prf.googlegroups.com...
>
> >> > On Jun 11, 10:47 pm, markm75 <markm...(a)msn.com> wrote:
> >> >> On Jun 11, 10:26 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> >> >> wrote:
>
> >> >> > I figured that was what would happen. It could be a few things:
>
> >> >> > 1. A damaged e00.chk
>
> >> >> > 2. Runiing eseutil againstlogfiles that were created pre 2003 SP1
>
> >> >> > 3. One of the logs has the sameversionas edb.log. This would be
> >> >> > my
> >> >> > bet.
> >> >> > Run eseutil /ml against edb.log, then delete all the logs that are
> >> >> > equal or
> >> >> > higher than e00.chk. There will be some loss ( all the logs equal
> >> >> > or
> >> >> > higher
> >> >> > than edb.log) but your is will start and the stores will mount.
>
> >> >> > "markm75" <markm...(a)msn.com> wrote in message
>
> >> >> >news:1181611040.378234.205240(a)n15g2000prd.googlegroups.com...
>
> >> >> > > On Jun 11, 3:11 pm, "John Fullbright"
> >> >> > > <fjohn(a)donotspamenetappdotcom>
> >> >> > > wrote:
> >> >> > >> It sounds a lot like a miisinglogor a badloggeneration. I'd do
> >> >> > >> the
> >> >> > >> /ml
> >> >> > >> to check the inegrity of the logs.
>
> >> >> > >> "markm75" <markm...(a)msn.com> wrote in message
>
> >> >> > >>news:1181586793.602557.84450(a)k79g2000hse.googlegroups.com...
>
> >> >> > >> > On Jun 11, 2:23 pm, "John Fullbright"
> >> >> > >> > <fjohn(a)donotspamenetappdotcom>
> >> >> > >> > wrote:
> >> >> > >> >> The logs are still there... did you test the integrity of the
> >> >> > >> >> transaction
> >> >> > >> >> logs with eseutil /ml?
>
> >> >> > >> >> "markm75" <markm...(a)msn.com> wrote in message
>
> >> >> > >> >>news:1181576925.172289.318250(a)h2g2000hsg.googlegroups.com...
>
> >> >> > >> >> > On Jun 11, 11:12 am, "Lanwench [MVP - Exchange]"
> >> >> > >> >> > <lanwe...(a)heybuddy.donotsendme.unsolicitedmailatyahoo.com>
> >> >> > >> >> > wrote:
> >> >> > >> >> >> markm75 <markm...(a)msn.com> wrote:
> >> >> > >> >> >> > I'm receiving eventid 214: Information Store (3396)
> >> >> > >> >> >> > First
> >> >> > >> >> >> > Storage
> >> >> > >> >> >> > Group: The backup has stopped with error -521. In the
> >> >> > >> >> >> > event
> >> >> > >> >> >> > viewer,
> >> >> > >> >> >> > while the backuplogitself shows this error:
>
> >> >> > >> >> >> > The 'Microsoft Information Store' returned 'Error
> >> >> > >> >> >> > returned
> >> >> > >> >> >> > from
> >> >> > >> >> >> > an
> >> >> > >> >> >> > ESE
> >> >> > >> >> >> > function call (d).
>
> >> >> > >> >> >> > ' from a call to 'HrESEBackupSetup()' additional data
> >> >> > >> >> >> > '-'The
> >> >> > >> >> >> > 'Microsoft Information Store' returned 'Functions called
> >> >> > >> >> >> > in
> >> >> > >> >> >> > an
> >> >> > >> >> >> > invalid
> >> >> > >> >> >> > sequence.
>
> >> >> > >> >> >> > ' from a call to 'HrESEBackupClose()' additional data '-'
>
> >> >> > >> >> >> > This occurs for a full backup.
>
> >> >> > >> >> >> > I recently had a crashed and corrupted Exchange 2003sp2
> >> >> > >> >> >> > server,
> >> >> > >> >> >> > which
> >> >> > >> >> >> > i ran eseutil /p on each database. All of the logs are
> >> >> > >> >> >> > still in
> >> >> > >> >> >> > the
> >> >> > >> >> >> > folder dating back to when it crashed.
>
> >> >> > >> >> >> > I'm assuming I cant just delete these transactionlogfiles
> >> >> > >> >> >> > and
> >> >> > >> >> >> > start
> >> >> > >> >> >> > fresh?
>
> >> >> > >> >> >> > Is there some sort of workaround for this error?
>
> >> >> > >> >> >> > Thanks for any help
>
> >> >> > >> >> >> This can occur when you're backing up system state in the
> >> >> > >> >> >> same
> >> >> > >> >> >> job -http://support.microsoft.com/kb/820272
>
> >> >> > >> >> >> (btw, that was the result of a very quick google search;
> >> >> > >> >> >> it's
> >> >> > >> >> >> always
> >> >> > >> >> >> good
> >> >> > >> >> >> to
> >> >> > >> >> >> google before posting).- Hide quoted text -
>
> >> >> > >> >> >> - Show quoted text -
>
> >> >> > >> >> > I amnotbacking up the system state in the same job... And
> >> >> > >> >> > yes
> >> >> > >> >> > I
> >> >> > >> >> > have
> >> >> > >> >> > googled this, only to find one other article which
> >> >> > >> >> > maynoteven
> >> >> > >> >> > pertain.
>
> >> >> > >> >> > Thanks- Hide quoted text -
>
> >> >> > >> >> - Show quoted text -
>
> >> >> > >> > Hadnt tried that one yet.
>
> >> >> > >> > I did the eseutil /p on the priv1.edb, which took like 15 hours
> >> >> > >> > to
> >> >> > >> > complete (there were lots of errors previously).
>
> >> >> > >> > I'm guessing i need to run eseutil /d as well as
> >> >> > >> > isinteg -fix -tests
> >> >> > >> > alltests as well?
>
> >> >> > >> > I hadnt heard of the /ml swich, ill have to wait till this
> >> >> > >> > evening
> >> >> > >> > to
> >> >> > >> > try this one, as i guess the store must be offline (i'm hoping
> >> >> > >> > it
> >> >> > >> > doesnt take 15 hours to complete).
>
> >> >> > >> > Thanks- Hide quoted text -
>
> >> >> > >> - Show quoted text -
>
> >> >> > > I ran that command.. but received this error:
>
> >> >> > > Operation terminated with error -514 (JET_errBadLogVersion,Version
> >> >> > > of
> >> >> > >logfile
> >> >> > > isnotcompatiblewithJetversion) after 1.47 seconds.- Hide quoted
> >> >> > > text -
>
> >> >> > - Show quoted text -
>
> >> >> These logs should have all been created atSP2.. or so i thought,
> >> >> unless somewhere along the way when i did the restore.. it was in a
> >> >> presp2state for a brief moment.
>
> >> >> I dont seem to have afiletitled edb.log..
>
> >> >> i have res1 and res2.log.. as well as E0010***.log(multiple ones)...
>
> >> >> Thanks again- Hide quoted text -
>
> >> >> - Show quoted text -
>
> >> > I also moved thelogfiles that were giving the backup program fits..
> >> > out of the directory and decided to start clean.. so i remounted and
> >> > tried the backup, but I still get the same error message.. so even
> >> > this hasnt seemed to work unfortunately- Hide quoted text -
>
> >> - Show quoted text -
>
> > I ran a check on e00.chk.. i get:
>
> > Cannot read log file header
> > Version of log file is not compatible with jet version error -514- Hide quoted text -
>
> - Show quoted text -

Ok, ill try that.. which logs do i delete? all e00*,.logs pus the
res1, res2 etc?

Thx

From: John Fullbright on 12 Jun 2007 21:33
The checkpoint file and all the logs (e00.chk and e00*.log). In fact, you
may want to just movc them so that you can try a restore to a recovery
server and replay later.


"markm75" <markm75c(a)msn.com> wrote in message
news:1181686165.869600.139420(a)i38g2000prf.googlegroups.com...
> On Jun 12, 4:17 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> wrote:
>> If you remove the logs and the checkpoint, exchange will create a new
>> checkpoint file. The checkpoint file controls which logs to replay, so
>> you'll lose the data in the transaction logs doing this.
>>
>> "markm75" <markm...(a)msn.com> wrote in message
>>
>> news:1181675215.384984.273980(a)z28g2000prd.googlegroups.com...
>>
>>
>>
>> > On Jun 12, 2:41 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
>> > wrote:
>> >> If e00.chk itself is corrupt, your options are limited.
>>
>> >>http://support.microsoft.com/kb/248122/en-us
>>
>> >> "markm75" <markm...(a)msn.com> wrote in message
>>
>> >>news:1181619421.541041.259410(a)i38g2000prf.googlegroups.com...
>>
>> >> > On Jun 11, 10:47 pm, markm75 <markm...(a)msn.com> wrote:
>> >> >> On Jun 11, 10:26 pm, "John Fullbright"
>> >> >> <fjohn(a)donotspamenetappdotcom>
>> >> >> wrote:
>>
>> >> >> > I figured that was what would happen. It could be a few things:
>>
>> >> >> > 1. A damaged e00.chk
>>
>> >> >> > 2. Runiing eseutil againstlogfiles that were created pre 2003
>> >> >> > SP1
>>
>> >> >> > 3. One of the logs has the sameversionas edb.log. This would
>> >> >> > be
>> >> >> > my
>> >> >> > bet.
>> >> >> > Run eseutil /ml against edb.log, then delete all the logs that
>> >> >> > are
>> >> >> > equal or
>> >> >> > higher than e00.chk. There will be some loss ( all the logs
>> >> >> > equal
>> >> >> > or
>> >> >> > higher
>> >> >> > than edb.log) but your is will start and the stores will mount.
>>
>> >> >> > "markm75" <markm...(a)msn.com> wrote in message
>>
>> >> >> >news:1181611040.378234.205240(a)n15g2000prd.googlegroups.com...
>>
>> >> >> > > On Jun 11, 3:11 pm, "John Fullbright"
>> >> >> > > <fjohn(a)donotspamenetappdotcom>
>> >> >> > > wrote:
>> >> >> > >> It sounds a lot like a miisinglogor a badloggeneration. I'd
>> >> >> > >> do
>> >> >> > >> the
>> >> >> > >> /ml
>> >> >> > >> to check the inegrity of the logs.
>>
>> >> >> > >> "markm75" <markm...(a)msn.com> wrote in message
>>
>> >> >> > >>news:1181586793.602557.84450(a)k79g2000hse.googlegroups.com...
>>
>> >> >> > >> > On Jun 11, 2:23 pm, "John Fullbright"
>> >> >> > >> > <fjohn(a)donotspamenetappdotcom>
>> >> >> > >> > wrote:
>> >> >> > >> >> The logs are still there... did you test the integrity of
>> >> >> > >> >> the
>> >> >> > >> >> transaction
>> >> >> > >> >> logs with eseutil /ml?
>>
>> >> >> > >> >> "markm75" <markm...(a)msn.com> wrote in message
>>
>> >> >> > >> >>news:1181576925.172289.318250(a)h2g2000hsg.googlegroups.com...
>>
>> >> >> > >> >> > On Jun 11, 11:12 am, "Lanwench [MVP - Exchange]"
>> >> >> > >> >> > <lanwe...(a)heybuddy.donotsendme.unsolicitedmailatyahoo.com>
>> >> >> > >> >> > wrote:
>> >> >> > >> >> >> markm75 <markm...(a)msn.com> wrote:
>> >> >> > >> >> >> > I'm receiving eventid 214: Information Store (3396)
>> >> >> > >> >> >> > First
>> >> >> > >> >> >> > Storage
>> >> >> > >> >> >> > Group: The backup has stopped with error -521. In the
>> >> >> > >> >> >> > event
>> >> >> > >> >> >> > viewer,
>> >> >> > >> >> >> > while the backuplogitself shows this error:
>>
>> >> >> > >> >> >> > The 'Microsoft Information Store' returned 'Error
>> >> >> > >> >> >> > returned
>> >> >> > >> >> >> > from
>> >> >> > >> >> >> > an
>> >> >> > >> >> >> > ESE
>> >> >> > >> >> >> > function call (d).
>>
>> >> >> > >> >> >> > ' from a call to 'HrESEBackupSetup()' additional data
>> >> >> > >> >> >> > '-'The
>> >> >> > >> >> >> > 'Microsoft Information Store' returned 'Functions
>> >> >> > >> >> >> > called
>> >> >> > >> >> >> > in
>> >> >> > >> >> >> > an
>> >> >> > >> >> >> > invalid
>> >> >> > >> >> >> > sequence.
>>
>> >> >> > >> >> >> > ' from a call to 'HrESEBackupClose()' additional data
>> >> >> > >> >> >> > '-'
>>
>> >> >> > >> >> >> > This occurs for a full backup.
>>
>> >> >> > >> >> >> > I recently had a crashed and corrupted Exchange
>> >> >> > >> >> >> > 2003sp2
>> >> >> > >> >> >> > server,
>> >> >> > >> >> >> > which
>> >> >> > >> >> >> > i ran eseutil /p on each database. All of the logs
>> >> >> > >> >> >> > are
>> >> >> > >> >> >> > still in
>> >> >> > >> >> >> > the
>> >> >> > >> >> >> > folder dating back to when it crashed.
>>
>> >> >> > >> >> >> > I'm assuming I cant just delete these
>> >> >> > >> >> >> > transactionlogfiles
>> >> >> > >> >> >> > and
>> >> >> > >> >> >> > start
>> >> >> > >> >> >> > fresh?
>>
>> >> >> > >> >> >> > Is there some sort of workaround for this error?
>>
>> >> >> > >> >> >> > Thanks for any help
>>
>> >> >> > >> >> >> This can occur when you're backing up system state in
>> >> >> > >> >> >> the
>> >> >> > >> >> >> same
>> >> >> > >> >> >> job -http://support.microsoft.com/kb/820272
>>
>> >> >> > >> >> >> (btw, that was the result of a very quick google search;
>> >> >> > >> >> >> it's
>> >> >> > >> >> >> always
>> >> >> > >> >> >> good
>> >> >> > >> >> >> to
>> >> >> > >> >> >> google before posting).- Hide quoted text -
>>
>> >> >> > >> >> >> - Show quoted text -
>>
>> >> >> > >> >> > I amnotbacking up the system state in the same job... And
>> >> >> > >> >> > yes
>> >> >> > >> >> > I
>> >> >> > >> >> > have
>> >> >> > >> >> > googled this, only to find one other article which
>> >> >> > >> >> > maynoteven
>> >> >> > >> >> > pertain.
>>
>> >> >> > >> >> > Thanks- Hide quoted text -
>>
>> >> >> > >> >> - Show quoted text -
>>
>> >> >> > >> > Hadnt tried that one yet.
>>
>> >> >> > >> > I did the eseutil /p on the priv1.edb, which took like 15
>> >> >> > >> > hours
>> >> >> > >> > to
>> >> >> > >> > complete (there were lots of errors previously).
>>
>> >> >> > >> > I'm guessing i need to run eseutil /d as well as
>> >> >> > >> > isinteg -fix -tests
>> >> >> > >> > alltests as well?
>>
>> >> >> > >> > I hadnt heard of the /ml swich, ill have to wait till this
>> >> >> > >> > evening
>> >> >> > >> > to
>> >> >> > >> > try this one, as i guess the store must be offline (i'm
>> >> >> > >> > hoping
>> >> >> > >> > it
>> >> >> > >> > doesnt take 15 hours to complete).
>>
>> >> >> > >> > Thanks- Hide quoted text -
>>
>> >> >> > >> - Show quoted text -
>>
>> >> >> > > I ran that command.. but received this error:
>>
>> >> >> > > Operation terminated with error -514
>> >> >> > > (JET_errBadLogVersion,Version
>> >> >> > > of
>> >> >> > >logfile
>> >> >> > > isnotcompatiblewithJetversion) after 1.47 seconds.- Hide quoted
>> >> >> > > text -
>>
>> >> >> > - Show quoted text -
>>
>> >> >> These logs should have all been created atSP2.. or so i thought,
>> >> >> unless somewhere along the way when i did the restore.. it was in a
>> >> >> presp2state for a brief moment.
>>
>> >> >> I dont seem to have afiletitled edb.log..
>>
>> >> >> i have res1 and res2.log.. as well as E0010***.log(multiple
>> >> >> ones)...
>>
>> >> >> Thanks again- Hide quoted text -
>>
>> >> >> - Show quoted text -
>>
>> >> > I also moved thelogfiles that were giving the backup program fits..
>> >> > out of the directory and decided to start clean.. so i remounted and
>> >> > tried the backup, but I still get the same error message.. so even
>> >> > this hasnt seemed to work unfortunately- Hide quoted text -
>>
>> >> - Show quoted text -
>>
>> > I ran a check on e00.chk.. i get:
>>
>> > Cannot read log file header
>> > Version of log file is not compatible with jet version error -514- Hide
>> > quoted text -
>>
>> - Show quoted text -
>
> Ok, ill try that.. which logs do i delete? all e00*,.logs pus the
> res1, res2 etc?
>
> Thx
>


From: markm75 on 12 Jun 2007 21:43
On Jun 12, 9:33 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
wrote:
> The checkpoint file and all the logs (e00.chk and e00*.log). In fact, you
> may want to just movc them so that you can try a restore to a recovery
> server and replay later.
>
> "markm75" <markm...(a)msn.com> wrote in message
>
> news:1181686165.869600.139420(a)i38g2000prf.googlegroups.com...
>
>
>
> > On Jun 12, 4:17 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> > wrote:
> >> If you remove the logs and the checkpoint, exchange will create a new
> >> checkpoint file. The checkpoint file controls which logs to replay, so
> >> you'll lose the data in the transaction logs doing this.
>
> >> "markm75" <markm...(a)msn.com> wrote in message
>
> >>news:1181675215.384984.273980(a)z28g2000prd.googlegroups.com...
>
> >> > On Jun 12, 2:41 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> >> > wrote:
> >> >> If e00.chk itself is corrupt, your options are limited.
>
> >> >>http://support.microsoft.com/kb/248122/en-us
>
> >> >> "markm75" <markm...(a)msn.com> wrote in message
>
> >> >>news:1181619421.541041.259410(a)i38g2000prf.googlegroups.com...
>
> >> >> > On Jun 11, 10:47 pm, markm75 <markm...(a)msn.com> wrote:
> >> >> >> On Jun 11, 10:26 pm, "John Fullbright"
> >> >> >> <fjohn(a)donotspamenetappdotcom>
> >> >> >> wrote:
>
> >> >> >> > I figured that was what would happen. It could be a few things:
>
> >> >> >> > 1. A damaged e00.chk
>
> >> >> >> > 2. Runiing eseutil againstlogfiles that were created pre 2003
> >> >> >> > SP1
>
> >> >> >> > 3. One of the logs has the sameversionas edb.log. This would
> >> >> >> > be
> >> >> >> > my
> >> >> >> > bet.
> >> >> >> > Run eseutil /ml against edb.log, then delete all the logs that
> >> >> >> > are
> >> >> >> > equal or
> >> >> >> > higher than e00.chk. There will be some loss ( all the logs
> >> >> >> > equal
> >> >> >> > or
> >> >> >> > higher
> >> >> >> > than edb.log) but your is will start and the stores will mount.
>
> >> >> >> > "markm75" <markm...(a)msn.com> wrote in message
>
> >> >> >> >news:1181611040.378234.205240(a)n15g2000prd.googlegroups.com...
>
> >> >> >> > > On Jun 11, 3:11 pm, "John Fullbright"
> >> >> >> > > <fjohn(a)donotspamenetappdotcom>
> >> >> >> > > wrote:
> >> >> >> > >> It sounds a lot like a miisinglogor a badloggeneration. I'd
> >> >> >> > >> do
> >> >> >> > >> the
> >> >> >> > >> /ml
> >> >> >> > >> to check the inegrity of the logs.
>
> >> >> >> > >> "markm75" <markm...(a)msn.com> wrote in message
>
> >> >> >> > >>news:1181586793.602557.84450(a)k79g2000hse.googlegroups.com...
>
> >> >> >> > >> > On Jun 11, 2:23 pm, "John Fullbright"
> >> >> >> > >> > <fjohn(a)donotspamenetappdotcom>
> >> >> >> > >> > wrote:
> >> >> >> > >> >> The logs are still there... did you test the integrity of
> >> >> >> > >> >> the
> >> >> >> > >> >> transaction
> >> >> >> > >> >> logs with eseutil /ml?
>
> >> >> >> > >> >> "markm75" <markm...(a)msn.com> wrote in message
>
> >> >> >> > >> >>news:1181576925.172289.318250(a)h2g2000hsg.googlegroups.com...
>
> >> >> >> > >> >> > On Jun 11, 11:12 am, "Lanwench [MVP - Exchange]"
> >> >> >> > >> >> > <lanwe...(a)heybuddy.donotsendme.unsolicitedmailatyahoo.com>
> >> >> >> > >> >> > wrote:
> >> >> >> > >> >> >> markm75 <markm...(a)msn.com> wrote:
> >> >> >> > >> >> >> > I'm receiving eventid 214: Information Store (3396)
> >> >> >> > >> >> >> > First
> >> >> >> > >> >> >> > Storage
> >> >> >> > >> >> >> > Group: The backup has stopped with error -521. In the
> >> >> >> > >> >> >> > event
> >> >> >> > >> >> >> > viewer,
> >> >> >> > >> >> >> > while the backuplogitself shows this error:
>
> >> >> >> > >> >> >> > The 'Microsoft Information Store' returned 'Error
> >> >> >> > >> >> >> > returned
> >> >> >> > >> >> >> > from
> >> >> >> > >> >> >> > an
> >> >> >> > >> >> >> > ESE
> >> >> >> > >> >> >> > function call (d).
>
> >> >> >> > >> >> >> > ' from a call to 'HrESEBackupSetup()' additional data
> >> >> >> > >> >> >> > '-'The
> >> >> >> > >> >> >> > 'Microsoft Information Store' returned 'Functions
> >> >> >> > >> >> >> > called
> >> >> >> > >> >> >> > in
> >> >> >> > >> >> >> > an
> >> >> >> > >> >> >> > invalid
> >> >> >> > >> >> >> > sequence.
>
> >> >> >> > >> >> >> > ' from a call to 'HrESEBackupClose()' additional data
> >> >> >> > >> >> >> > '-'
>
> >> >> >> > >> >> >> > This occurs for a full backup.
>
> >> >> >> > >> >> >> > I recently had a crashed and corrupted Exchange
> >> >> >> > >> >> >> > 2003sp2
> >> >> >> > >> >> >> > server,
> >> >> >> > >> >> >> > which
> >> >> >> > >> >> >> > i ran eseutil /p on each database. All of the logs
> >> >> >> > >> >> >> > are
> >> >> >> > >> >> >> > still in
> >> >> >> > >> >> >> > the
> >> >> >> > >> >> >> > folder dating back to when it crashed.
>
> >> >> >> > >> >> >> > I'm assuming I cant just delete these
> >> >> >> > >> >> >> > transactionlogfiles
> >> >> >> > >> >> >> > and
> >> >> >> > >> >> >> > start
> >> >> >> > >> >> >> > fresh?
>
> >> >> >> > >> >> >> > Is there some sort of workaround for this error?
>
> >> >> >> > >> >> >> > Thanks for any help
>
> >> >> >> > >> >> >> This can occur when you're backing up system state in
> >> >> >> > >> >> >> the
> >> >> >> > >> >> >> same
> >> >> >> > >> >> >> job -http://support.microsoft.com/kb/820272
>
> >> >> >> > >> >> >> (btw, that was the result of a very quick google search;
> >> >> >> > >> >> >> it's
> >> >> >> > >> >> >> always
> >> >> >> > >> >> >> good
> >> >> >> > >> >> >> to
> >> >> >> > >> >> >> google before posting).- Hide quoted text -
>
> >> >> >> > >> >> >> - Show quoted text -
>
> >> >> >> > >> >> > I amnotbacking up the system state in the same job... And
> >> >> >> > >> >> > yes
> >> >> >> > >> >> > I
> >> >> >> > >> >> > have
> >> >> >> > >> >> > googled this, only to find one other article which
> >> >> >> > >> >> > maynoteven
> >> >> >> > >> >> > pertain.
>
> >> >> >> > >> >> > Thanks- Hide quoted text -
>
> >> >> >> > >> >> - Show quoted text -
>
> >> >> >> > >> > Hadnt tried that one yet.
>
> >> >> >> > >> > I did the eseutil /p on the priv1.edb, which took like 15
> >> >> >> > >> > hours
> >> >> >> > >> > to
> >> >> >> > >> > complete (there were lots of errors previously).
>
> >> >> >> > >> > I'm guessing i need to run eseutil /d as well as
> >> >> >> > >> > isinteg -fix -tests
> >> >> >> > >> > alltests as well?
>
> >> >> >> > >> > I hadnt heard of the /ml swich, ill have to wait till this
> >> >> >> > >> > evening
> >> >> >> > >> > to
> >> >> >> > >> > try this one, as i guess the store must be offline (i'm
> >> >> >> > >> > hoping
> >> >> >> > >> > it
> >> >> >> > >> > doesnt take 15 hours to complete).
>
> >> >> >> > >> > Thanks- Hide quoted text -
>
> >> >> >> > >> - Show quoted text -
>
> >> >> >> > > I ran that command.. but received this error:
>
> >> >> >> > > Operation terminated with error -514
> >> >> >> > > (JET_errBadLogVersion,Version
> >> >> >> > > of
> >> >> >> > >logfile
> >> >> >> > > isnotcompatiblewithJetversion) after 1.47 seconds.- Hide quoted
> >> >> >> > > text -
>
> >> >> >> > - Show quoted text -
>
> >> >> >> These logs should have all been created atSP2.. or so i thought,
> >> >> >> unless somewhere along the way when i did the restore.. it was in a
> >> >> >> presp2state for a brief moment.
>
> >> >> >> I dont seem to have afiletitled edb.log..
>
> >> >> >> i have res1 and res2.log.. as well as E0010***.log(multiple
> >> >> >> ones)...
>
> >> >> >> Thanks again- Hide quoted text -
>
> >> >> >> - Show quoted text -
>
> >> >> > I also moved thelogfiles that were giving the backup program fits..
> >> >> > out of the directory and decided to start clean.. so i remounted and
> >> >> > tried the backup, but I still get the same error message.. so even
> >> >> > this hasnt seemed to work unfortunately- Hide quoted text -
>
> >> >> - Show quoted text -
>
> >> > I ran a check on e00.chk.. i get:
>
> >> > Cannot read log file header
> >> > Version of log file is not compatible with jet version error -514- Hide
> >> > quoted text -
>
> >> - Show quoted text -
>
> > Ok, ill try that.. which logs do i delete? all e00*,.logs pus the
> > res1, res2 etc?
>
> > Thx- Hide quoted text -
>
> - Show quoted text -

I removed all of them.. however, the backup still failed with the same
error.

Everything works fine but the backup.. a bit of a bummer.


From: markm75 on 12 Jun 2007 22:13
On Jun 12, 9:43 pm, markm75 <markm...(a)msn.com> wrote:
> On Jun 12, 9:33 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> wrote:
>
>
>
>
>
> > The checkpoint file and all the logs (e00.chk and e00*.log). In fact, you
> > may want to just movc them so that you can try a restore to a recovery
> > server and replay later.
>
> > "markm75" <markm...(a)msn.com> wrote in message
>
> >news:1181686165.869600.139420(a)i38g2000prf.googlegroups.com...
>
> > > On Jun 12, 4:17 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> > > wrote:
> > >> If you remove the logs and the checkpoint, exchange will create a new
> > >> checkpoint file. The checkpoint file controls which logs to replay, so
> > >> you'll lose the data in the transaction logs doing this.
>
> > >> "markm75" <markm...(a)msn.com> wrote in message
>
> > >>news:1181675215.384984.273980(a)z28g2000prd.googlegroups.com...
>
> > >> > On Jun 12, 2:41 pm, "John Fullbright" <fjohn(a)donotspamenetappdotcom>
> > >> > wrote:
> > >> >> If e00.chk itself is corrupt, your options are limited.
>
> > >> >>http://support.microsoft.com/kb/248122/en-us
>
> > >> >> "markm75" <markm...(a)msn.com> wrote in message
>
> > >> >>news:1181619421.541041.259410(a)i38g2000prf.googlegroups.com...
>
> > >> >> > On Jun 11, 10:47 pm, markm75 <markm...(a)msn.com> wrote:
> > >> >> >> On Jun 11, 10:26 pm, "John Fullbright"
> > >> >> >> <fjohn(a)donotspamenetappdotcom>
> > >> >> >> wrote:
>
> > >> >> >> > I figured that was what would happen. It could be a few things:
>
> > >> >> >> > 1. A damaged e00.chk
>
> > >> >> >> > 2. Runiing eseutil againstlogfiles that were created pre 2003
> > >> >> >> > SP1
>
> > >> >> >> > 3. One of the logs has the sameversionas edb.log. This would
> > >> >> >> > be
> > >> >> >> > my
> > >> >> >> > bet.
> > >> >> >> > Run eseutil /ml against edb.log, then delete all the logs that
> > >> >> >> > are
> > >> >> >> > equal or
> > >> >> >> > higher than e00.chk. There will be some loss ( all the logs
> > >> >> >> > equal
> > >> >> >> > or
> > >> >> >> > higher
> > >> >> >> > than edb.log) but your is will start and the stores will mount.
>
> > >> >> >> > "markm75" <markm...(a)msn.com> wrote in message
>
> > >> >> >> >news:1181611040.378234.205240(a)n15g2000prd.googlegroups.com...
>
> > >> >> >> > > On Jun 11, 3:11 pm, "John Fullbright"
> > >> >> >> > > <fjohn(a)donotspamenetappdotcom>
> > >> >> >> > > wrote:
> > >> >> >> > >> It sounds a lot like a miisinglogor a badloggeneration. I'd
> > >> >> >> > >> do
> > >> >> >> > >> the
> > >> >> >> > >> /ml
> > >> >> >> > >> to check the inegrity of the logs.
>
> > >> >> >> > >> "markm75" <markm...(a)msn.com> wrote in message
>
> > >> >> >> > >>news:1181586793.602557.84450(a)k79g2000hse.googlegroups.com...
>
> > >> >> >> > >> > On Jun 11, 2:23 pm, "John Fullbright"
> > >> >> >> > >> > <fjohn(a)donotspamenetappdotcom>
> > >> >> >> > >> > wrote:
> > >> >> >> > >> >> The logs are still there... did you test the integrity of
> > >> >> >> > >> >> the
> > >> >> >> > >> >> transaction
> > >> >> >> > >> >> logs with eseutil /ml?
>
> > >> >> >> > >> >> "markm75" <markm...(a)msn.com> wrote in message
>
> > >> >> >> > >> >>news:1181576925.172289.318250(a)h2g2000hsg.googlegroups.com...
>
> > >> >> >> > >> >> > On Jun 11, 11:12 am, "Lanwench [MVP - Exchange]"
> > >> >> >> > >> >> > <lanwe...(a)heybuddy.donotsendme.unsolicitedmailatyahoo.com>
> > >> >> >> > >> >> > wrote:
> > >> >> >> > >> >> >> markm75 <markm...(a)msn.com> wrote:
> > >> >> >> > >> >> >> > I'm receiving eventid 214: Information Store (3396)
> > >> >> >> > >> >> >> > First
> > >> >> >> > >> >> >> > Storage
> > >> >> >> > >> >> >> > Group: The backup has stopped with error -521. In the
> > >> >> >> > >> >> >> > event
> > >> >> >> > >> >> >> > viewer,
> > >> >> >> > >> >> >> > while the backuplogitself shows this error:
>
> > >> >> >> > >> >> >> > The 'Microsoft Information Store' returned 'Error
> > >> >> >> > >> >> >> > returned
> > >> >> >> > >> >> >> > from
> > >> >> >> > >> >> >> > an
> > >> >> >> > >> >> >> > ESE
> > >> >> >> > >> >> >> > function call (d).
>
> > >> >> >> > >> >> >> > ' from a call to 'HrESEBackupSetup()' additional data
> > >> >> >> > >> >> >> > '-'The
> > >> >> >> > >> >> >> > 'Microsoft Information Store' returned 'Functions
> > >> >> >> > >> >> >> > called
> > >> >> >> > >> >> >> > in
> > >> >> >> > >> >> >> > an
> > >> >> >> > >> >> >> > invalid
> > >> >> >> > >> >> >> > sequence.
>
> > >> >> >> > >> >> >> > ' from a call to 'HrESEBackupClose()' additional data
> > >> >> >> > >> >> >> > '-'
>
> > >> >> >> > >> >> >> > This occurs for a full backup.
>
> > >> >> >> > >> >> >> > I recently had a crashed and corrupted Exchange
> > >> >> >> > >> >> >> > 2003sp2
> > >> >> >> > >> >> >> > server,
> > >> >> >> > >> >> >> > which
> > >> >> >> > >> >> >> > i ran eseutil /p on each database. All of the logs
> > >> >> >> > >> >> >> > are
> > >> >> >> > >> >> >> > still in
> > >> >> >> > >> >> >> > the
> > >> >> >> > >> >> >> > folder dating back to when it crashed.
>
> > >> >> >> > >> >> >> > I'm assuming I cant just delete these
> > >> >> >> > >> >> >> > transactionlogfiles
> > >> >> >> > >> >> >> > and
> > >> >> >> > >> >> >> > start
> > >> >> >> > >> >> >> > fresh?
>
> > >> >> >> > >> >> >> > Is there some sort of workaround for this error?
>
> > >> >> >> > >> >> >> > Thanks for any help
>
> > >> >> >> > >> >> >> This can occur when you're backing up system state in
> > >> >> >> > >> >> >> the
> > >> >> >> > >> >> >> same
> > >> >> >> > >> >> >> job -http://support.microsoft.com/kb/820272
>
> > >> >> >> > >> >> >> (btw, that was the result of a very quick google search;
> > >> >> >> > >> >> >> it's
> > >> >> >> > >> >> >> always
> > >> >> >> > >> >> >> good
> > >> >> >> > >> >> >> to
> > >> >> >> > >> >> >> google before posting).- Hide quoted text -
>
> > >> >> >> > >> >> >> - Show quoted text -
>
> > >> >> >> > >> >> > I amnotbacking up the system state in the same job... And
> > >> >> >> > >> >> > yes
> > >> >> >> > >> >> > I
> > >> >> >> > >> >> > have
> > >> >> >> > >> >> > googled this, only to find one other article which
> > >> >> >> > >> >> > maynoteven
> > >> >> >> > >> >> > pertain.
>
> > >> >> >> > >> >> > Thanks- Hide quoted text -
>
> > >> >> >> > >> >> - Show quoted text -
>
> > >> >> >> > >> > Hadnt tried that one yet.
>
> > >> >> >> > >> > I did the eseutil /p on the priv1.edb, which took like 15
> > >> >> >> > >> > hours
> > >> >> >> > >> > to
> > >> >> >> > >> > complete (there were lots of errors previously).
>
> > >> >> >> > >> > I'm guessing i need to run eseutil /d as well as
> > >> >> >> > >> > isinteg -fix -tests
> > >> >> >> > >> > alltests as well?
>
> > >> >> >> > >> > I hadnt heard of the /ml swich, ill have to wait till this
> > >> >> >> > >> > evening
> > >> >> >> > >> > to
> > >> >> >> > >> > try this one, as i guess the store must be offline (i'm
> > >> >> >> > >> > hoping
> > >> >> >> > >> > it
> > >> >> >> > >> > doesnt take 15 hours to complete).
>
> > >> >> >> > >> > Thanks- Hide quoted text -
>
> > >> >> >> > >> - Show quoted text -
>
> > >> >> >> > > I ran that command.. but received this error:
>
> > >> >> >> > > Operation terminated with error -514
> > >> >> >> > > (JET_errBadLogVersion,Version
> > >> >> >> > > of
> > >> >> >> > >logfile
> > >> >> >> > > isnotcompatiblewithJetversion) after 1.47 seconds.- Hide quoted
> > >> >> >> > > text -
>
> > >> >> >> > - Show quoted text -
>
> > >> >> >> These logs should have all been created atSP2.. or so i thought,
> > >> >> >> unless somewhere along the way when i did the restore.. it was in a
> > >> >> >> presp2state for a brief moment.
>
> > >> >> >> I dont seem to have afiletitled edb.log..
>
> > >> >> >> i have res1 and res2.log.. as well as E0010***.log(multiple
> > >> >> >> ones)...
>
> > >> >> >> Thanks again- Hide quoted text -
>
> > >> >> >> - Show quoted text -
>
> > >> >> > I also moved thelogfiles that were giving the backup program fits..
> > >> >> > out of the directory and decided to start clean.. so i remounted and
> > >> >> > tried the backup, but I still get the same error message.. so even
> > >> >> > this hasnt seemed to work unfortunately- Hide quoted text -
>
> > >> >> - Show quoted text -
>
> > >> > I ran a check on e00.chk.. i get:
>
> > >> > Cannot read log file header
> > >> > Version of log file is not compatible with jet version error -514- Hide
> > >> > quoted text -
>
> > >> - Show quoted text -
>
> > > Ok, ill try that.. which logs do i delete? all e00*,.logs pus the
> > > res1, res2 etc?
>
> > > Thx- Hide quoted text -
>
> > - Show quoted text -
>
> I removed all of them.. however, the backup still failed with the same
> error.
>
> Everything works fine but the backup.. a bit of a bummer.- Hide quoted text -
>
> - Show quoted text -

After calling MS for a bit.. i found the source of the problem..

Again, I was getting this event ID message: Information Store (3040)
First Storage Group: The backup has stopped with error -521. (EventID
214, ESE)..

The problem was actually with TrendMicro AntiVirus. For some reason,
despite having the checkbox checked in the Trend Web Interface
settings to exclude the exchange data directory, it wasnt excluding
it.. As the minute I turned off the AntiVirus program on the Exchange
server, all was well again.

Thanks for all the help to this point.


First  |  Prev  | 
Pages: 1 2 3 4
Prev: Free Busy connector fails and service shutting down automatically
Next: event id 1025 with Error: 0xfffff9bf