High CPU usages and sometimes hard crashes in my Debian/Linux.
in [Linux Hardware]
|
From: Paul on 18 Jan 2010 06:27 Ant wrote: > I got another one again about 30 minutes ago while using it. I tried > disabling AMD's Cool'n'Quiet in CMOS and powernow in Debian/Linux. They > did not fix it. > <<snip>> >>> >>> I checked logs. In /var/log/X11, I saw a bunch of: >>> (EE) NVIDIA(0): Error recovery failed. >>> (EE) NVIDIA(0): *** Aborting *** >>> (II) NVIDIA(0): Initialized AGP GART. >>> <<snip>> >>> >>> Any ideas? I do keep my Debian updated daily with apt-get update and >>> upgrade commands. I do not recall any recent X changes. You've got some kind of issue, where X issues a command to the Nvidia driver, the Nvidia driver doesn't come back, and X spins in a loop. I see the "(EE) NVIDIA" and isn't that a message from the Nvidia driver ? Perhaps the Nvidia driver has initiated a recovery (didn't get an interrupt or some kind of response from the card), but X can no longer communicate with the new instance of driver ? Maybe the recovery mechanism isn't set up right, or maybe someone never tested that recovery works properly ? You would think any failure tested or timed by the X layer of software, would be able to escape from the mess. I think if it was my problem, I'd be Googling your (EE) NVIDIA(0): Error recovery failed message to see what pops up. Maybe somewhere, there is an indication of which part is supposed to initiate recovery, and how the recovery scheme can screw up. It might be busted hardware, but it would be reassuring if Linux could always detect that. http://www.nvnews.net/vbulletin/showthread.php?p=1774855 I had some fun like you're having, last week. It was real handy to be able to telnet in, and view the log files and see whats up. I like how when Xorg is broken, my keyboard stops working, so I can't even press control-alt-backspace or anything. It's like driving a car, the lighter socket breaks, so in response, the steering wheel falls off the car :-) (I'd insert a good rant here, but what's the point. Nobody cares.) Paul
From: ANTant on 18 Jan 2010 17:03 > You've got some kind of issue, where X issues a command to the Nvidia > driver, the Nvidia driver doesn't come back, and X spins in a loop. > > I see the "(EE) NVIDIA" and isn't that a message from the Nvidia driver ? > Perhaps the Nvidia driver has initiated a recovery (didn't get an interrupt > or some kind of response from the card), but X can no longer > communicate with the new instance of driver ? Maybe the recovery > mechanism isn't set up right, or maybe someone never tested that > recovery works properly ? You would think any failure tested or timed > by the X layer of software, would be able to escape from the mess. > > I think if it was my problem, I'd be Googling your > > (EE) NVIDIA(0): Error recovery failed > > message to see what pops up. Maybe somewhere, there is an indication > of which part is supposed to initiate recovery, and how the recovery > scheme can screw up. It might be busted hardware, but it would be > reassuring if Linux could always detect that. > > http://www.nvnews.net/vbulletin/showthread.php?p=1774855 So my old motherboard might be bad? :( > I had some fun like you're having, last week. It was real handy to > be able to telnet in, and view the log files and see whats up. I like > how when Xorg is broken, my keyboard stops working, so I can't even > press control-alt-backspace or anything... How come no SSH connection? Telnet is so insecured. :) -- "We are anthill men upon an anthill world." --Ray Bradbury /\___/\ / /\ /\ \ Phillip (Ant) @ http://antfarm.ma.cx (Personal Web Site) | |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net \ _ / Please remove ANT if replying by e-mail. ( )
From: General Schvantzkoph on 19 Jan 2010 10:02 On Mon, 11 Jan 2010 12:33:59 -0800, Phillip Pi wrote: > Hello, > > The last few weeks, I noticed my old Linux/Debian box (2.6.30-2) keeps > getting random and rare high CPU due to Xorg and sometimes crashes. My > box, even via SSH2, felt slow. I checked the processes and saw: > > $ w > 11:53:37 up 6 days, 4:19, 3 users, load average: 6.26, 6.04, 6.19 > USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT ant > tty1 Wed03 5days 9.79s 0.00s /bin/bash > /usr/bin/start > ant pts/3 [deleted IP addy]10:37 0.00s 0.10s 0.00s w ant > pts/4 foobar:S.0 05Jan10 10:30 16.00s 16.00s BitchX Ant... > > $ top > top - 11:55:08 up 6 days, 4:20, 3 users, load average: 6.13, 5.91, > 6.12 Tasks: 132 total, 3 running, 129 sleeping, 0 stopped, 0 > zombie Cpu0 : 6.9%us, 2.4%sy, 1.3%ni, 88.1%id, 0.6%wa, 0.1%hi, > 0.6%si, 0.0%st > Mem: 2594748k total, 2168336k used, 426412k free, 64348k buffers > Swap: 2361512k total, 6452k used, 2355060k free, 1847020k cached > > PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND > 15529 root 20 0 101m 73m 2992 R 99.7 2.9 225:08.76 Xorg 20840 > ant 20 0 2468 1180 892 R 0.2 0.0 0:00.01 top > 1 root 20 0 2036 348 324 S 0.0 0.0 0:02.62 init > ... > > I tried to kill startx and Xorg processes, and my box froze (still > pingable, remote SSH2 connection frozen but not connectable, and IRC > connections lost). I have tried recompling the latest stable NVIDIA > (from nvidia.com) driver for GeForce FX 5200 (AGP), redoing my > /etc/X11/xorg.conf with NVIDIA's script help, disabling Compiz, etc. > > I checked logs. In /var/log/X11, I saw a bunch of: (EE) NVIDIA(0): Error > recovery failed. (EE) NVIDIA(0): *** Aborting *** > (II) NVIDIA(0): Initialized AGP GART. > > This sounds bad? What does that mean? End of dmesg showed these lines: > ... > [72619.360521] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 > Sun Nov 8 20:26:31 PST 2009 > ... > [72833.815914] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 > Sun Nov 8 20:26:31 PST 2009 > [72833.947202] agpgart-amd64 0000:00:00.0: AGP 3.5 bridge [72833.947218] > agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode > [72833.947284] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode > ... > [99432.775115] NVRM: Xid (0001:00): 6, PE0002 06bc 3f800000 0008fd14 > 00000000 3f800000 > [99469.794940] NVRM: Xid (0001:00): 6, PE0002 06bc 3f800000 0008fd14 > 00000000 3f800000 > [99469.836150] NVRM: Xid (0001:00): 7, Ch 00000002 M 00000a64 D 00000000 > intr 00010000 > [224756.205022] NVRM: Xid (0001:00): 6, PE0002 06bc 3f800000 0008fd14 > 00000000 3f800000 > [224756.251066] NVRM: Xid (0001:00): 7, Ch 00000002 M 0000069c D > 471229dd intr 00010000 > [225085.201829] NVRM: Xid (0001:00): 6, PE0002 0000 40000000 0010a7bc > c0000000 3f800000 > [225085.246217] NVRM: Xid (0001:00): 7, Ch 00000002 M 00001d7c D > ffff0000 intr 00010000 > ... > [526347.572029] NVRM: Xid (0001:00): 8, Channel 00000000 > > I posted more complete and other logs at, including sensors -f: > http://pastie.org/774029 ... My old Debian machine specifications can be > found in http://alpha.zimage.com/~ant/antfarm/about/computers.txt > (Secondary/Backup Computer section). > > Any ideas? I do keep my Debian updated daily with apt-get update and > upgrade commands. I do not recall any recent X changes. > > Thank you in advance. :) You might have a CPU cooling problem. Here is a link to sys_basher, make sure you have lm_sensors and the lm_sensors development package installed before you build it. sys_basher will stress your CPU and RAM, if the system crashes you'll have an answer. It will also record the CPU and motherboard temperatures between each test which will give you an idea about how hot things are getting before the crash happens. http://www.polybus.com/sys_basher_web/
From: Ant on 19 Jan 2010 10:54 On 1/19/2010 7:02 AM PT, General Schvantzkoph typed: > You might have a CPU cooling problem. Here is a link to sys_basher, make > sure you have lm_sensors and the lm_sensors development package installed > before you build it. sys_basher will stress your CPU and RAM, if the > system crashes you'll have an answer. It will also record the CPU and > motherboard temperatures between each test which will give you an idea > about how hot things are getting before the crash happens. > > http://www.polybus.com/sys_basher_web/ Ooh, nice tool! I downloaded, compiled, and ran it for over 30 minutes. So far no crashes, no errors, etc. I will keep it running until I need to go AFK (have to abort). How long are the tests supposed to run? I didn't see it mentioned in its README. -- "Where the sugar is, there will the ant be also." --Philippines /\___/\ / /\ /\ \ Phil./Ant @ http://antfarm.ma.cx (Personal Web Site) | |o o| | Ant's Quality Foraged Links: http://aqfl.net \ _ / Nuke ANT from e-mail address: philpi(a)earthlink.netANT ( ) or ANTant(a)zimage.com Ant is currently not listening to any songs on his home computer.
From: Ant on 19 Jan 2010 11:07 On 1/19/2010 7:54 AM PT, Ant typed: > On 1/19/2010 7:02 AM PT, General Schvantzkoph typed: > >> You might have a CPU cooling problem. Here is a link to sys_basher, make >> sure you have lm_sensors and the lm_sensors development package installed >> before you build it. sys_basher will stress your CPU and RAM, if the >> system crashes you'll have an answer. It will also record the CPU and >> motherboard temperatures between each test which will give you an idea >> about how hot things are getting before the crash happens. >> >> http://www.polybus.com/sys_basher_web/ > > Ooh, nice tool! I downloaded, compiled, and ran it for over 30 minutes. > So far no crashes, no errors, etc. I will keep it running until I need > to go AFK (have to abort). How long are the tests supposed to run? I > didn't see it mentioned in its README. Done! No problems. Copied and pasted its sys_basher.log: sys_basher version 1.2.3 Number of CPUs: 1 Total RAM: 2.475 GBytes Free RAM: 1.061 GBytes Total Swap: 2.252 GBytes Free Swap: 2.252 GBytes Buffer RAM: 228.418 MBytes Shared RAM: 0.000 KBytes Page Size: 4.000 KBytes January 19 2010 07:16:29 Initial Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 45C CORE1 TEMP: 45C VCORE: 2C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2481 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 32C TEMP2: 42C TEMP3: 42C Allocated Memory: 1.061 GBytes Thread 1 of 1: Running Single Precision FP Tests Thread 1 of 1: Single Precision FP Performance PASSED Thread 1 of 1: Single Precision Tests Thread 1 of 1: Running Double Precision FP Tests Thread 1 of 1: Double Precision FP PASSED Thread 1 of 1: Double Precision Tests Thread 1 of 1: Running 16 Bit Integer Tests Thread 1 of 1: 16 Bit Integer PASSED Thread 1 of 1: 16 Bit Integer Tests Thread 1 of 1: Running 32 bit Integer Tests Thread 1 of 1: 32 Bit Integer Performance PASSED Thread 1 of 1: 32 Bit Integer Tests Thread 1 of 1: Running 64 Bit Integer Tests Thread 1 of 1: 64 Bit Integer PASSED Thread 1 of 1: 64 Bit Integer Tests Loop:0 of 1 Create thread: 1 of 1 PASS, Thread 1, Pattern: Walking One/Zero 0101010101010101 January 19 2010 07:33:08 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C CORE1 TEMP: 62C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 32C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 PASS, Thread 1, Pattern: Walking One/Zero 0202020202020202 January 19 2010 07:33:14 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C CORE1 TEMP: 62C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 32C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 PASS, Thread 1, Pattern: Walking One/Zero 0404040404040404 January 19 2010 07:33:20 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 32C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 PASS, Thread 1, Pattern: Walking One/Zero 0808080808080808 January 19 2010 07:33:25 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 32C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 PASS, Thread 1, Pattern: Walking One/Zero 1010101010101010 January 19 2010 07:33:31 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C CORE1 TEMP: 62C VCORE: 2C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 32C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 PASS, Thread 1, Pattern: Walking One/Zero 2020202020202020 January 19 2010 07:33:36 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 2C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 32C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 PASS, Thread 1, Pattern: Walking One/Zero 4040404040404040 January 19 2010 07:33:42 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 32C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 PASS, Thread 1, Pattern: Walking One/Zero 8080808080808080 January 19 2010 07:33:47 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 32C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 PASS, Thread 1, Patterns: 0000000000000000 0000000000000000 FFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFF January 19 2010 07:33:57 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 32C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 PASS, Thread 1, Patterns: 1111111111111111 1111111111111111 EEEEEEEEEEEEEEEE EEEEEEEEEEEEEEEE January 19 2010 07:34:07 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 32C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Patterns: 2222222222222222 2222222222222222 DDDDDDDDDDDDDDDD DDDDDDDDDDDDDDDD January 19 2010 07:34:17 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 32C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Patterns: 3333333333333333 3333333333333333 CCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCC January 19 2010 07:34:27 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 32C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Patterns: 4444444444444444 4444444444444444 BBBBBBBBBBBBBBBB BBBBBBBBBBBBBBBB January 19 2010 07:34:37 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 32C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Patterns: 5555555555555555 5555555555555555 AAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAA January 19 2010 07:34:47 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Patterns: 6666666666666666 6666666666666666 9999999999999999 9999999999999999 January 19 2010 07:34:57 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 2C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Patterns: 7777777777777777 7777777777777777 8888888888888888 8888888888888888 January 19 2010 07:35:07 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 32C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Patterns: 0000000000000000 FFFFFFFFFFFFFFFF 0000000000000000 FFFFFFFFFFFFFFFF January 19 2010 07:35:17 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Patterns: 1111111111111111 EEEEEEEEEEEEEEEE 1111111111111111 EEEEEEEEEEEEEEEE January 19 2010 07:35:27 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C CORE1 TEMP: 59C VCORE: 2C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Patterns: 2222222222222222 DDDDDDDDDDDDDDDD 2222222222222222 DDDDDDDDDDDDDDDD January 19 2010 07:35:37 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Patterns: 3333333333333333 CCCCCCCCCCCCCCCC 3333333333333333 CCCCCCCCCCCCCCCC January 19 2010 07:35:47 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C CORE1 TEMP: 59C VCORE: 2C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Patterns: 4444444444444444 BBBBBBBBBBBBBBBB 4444444444444444 BBBBBBBBBBBBBBBB January 19 2010 07:35:57 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C CORE1 TEMP: 59C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Patterns: 5555555555555555 AAAAAAAAAAAAAAAA 5555555555555555 AAAAAAAAAAAAAAAA January 19 2010 07:36:07 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C CORE1 TEMP: 59C VCORE: 2C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Patterns: 6666666666666666 9999999999999999 6666666666666666 9999999999999999 January 19 2010 07:36:16 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Patterns: 7777777777777777 8888888888888888 7777777777777777 8888888888888888 January 19 2010 07:36:26 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 0 January 19 2010 07:36:40 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 1 January 19 2010 07:36:53 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 2 January 19 2010 07:37:07 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 3 January 19 2010 07:37:20 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 4 January 19 2010 07:37:33 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 5 January 19 2010 07:37:47 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 6 January 19 2010 07:38:00 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 2C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 7 January 19 2010 07:38:14 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 8 January 19 2010 07:38:27 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 9 January 19 2010 07:38:40 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 10 January 19 2010 07:38:54 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 11 January 19 2010 07:39:07 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 12 January 19 2010 07:39:21 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 13 January 19 2010 07:39:34 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C CORE1 TEMP: 62C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 14 January 19 2010 07:39:47 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 2C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 15 January 19 2010 07:40:01 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 16 January 19 2010 07:40:14 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 17 January 19 2010 07:40:28 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 18 January 19 2010 07:40:41 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 19 January 19 2010 07:40:54 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2410 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 20 January 19 2010 07:41:08 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2393 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 21 January 19 2010 07:41:21 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2410 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 22 January 19 2010 07:41:35 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2393 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 23 January 19 2010 07:41:48 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2393 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 24 January 19 2010 07:42:01 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C CORE1 TEMP: 62C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2393 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 25 January 19 2010 07:42:15 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2393 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 26 January 19 2010 07:42:28 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C CORE1 TEMP: 62C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2410 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 27 January 19 2010 07:42:42 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C CORE1 TEMP: 62C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2410 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 28 January 19 2010 07:42:55 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C CORE1 TEMP: 62C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 29 January 19 2010 07:43:08 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 30 January 19 2010 07:43:22 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 PASS, Thread 1, Pattern: Data = Addr << 31 January 19 2010 07:43:35 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C CORE1 TEMP: 62C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Multi Bank Test (2 banks) January 19 2010 07:43:42 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C CORE1 TEMP: 62C VCORE: 2C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 PASS, Thread 1, Multi Bank Test (3 banks) January 19 2010 07:43:52 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Multi Bank Test (4 banks) January 19 2010 07:44:03 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Multi Bank Test (5 banks) January 19 2010 07:44:09 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 PASS, Thread 1, Multi Bank Test (6 banks) January 19 2010 07:44:20 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Multi Bank Test (7 banks) January 19 2010 07:44:27 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Multi Bank Test (8 banks) January 19 2010 07:44:37 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Multi Bank Test (9 banks) January 19 2010 07:44:45 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Multi Bank Test (10 banks) January 19 2010 07:44:52 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Multi Bank Test (11 banks) January 19 2010 07:44:59 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Multi Bank Test (12 banks) January 19 2010 07:45:12 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C CORE1 TEMP: 59C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Multi Bank Test (13 banks) January 19 2010 07:45:19 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C CORE1 TEMP: 59C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Multi Bank Test (14 banks) January 19 2010 07:45:26 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Multi Bank Test (15 banks) January 19 2010 07:45:34 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C CORE1 TEMP: 59C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Memory Refresh January 19 2010 07:46:39 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 2C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Random Data [Seed 110D5A4544145B40] January 19 2010 07:46:46 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Random Data [Seed 55FF04EBBA400647] January 19 2010 07:46:53 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 2C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Random Data [Seed 89C8DDC8FA8889C9] January 19 2010 07:47:01 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2463 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Random Data [Seed C507518781540387] January 19 2010 07:47:08 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C CORE1 TEMP: 62C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Random Data [Seed EBAAFABB957E81D1] January 19 2010 07:47:16 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 PASS, Thread 1, Random Data [Seed 56D001050D9C9011] January 19 2010 07:47:23 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C CORE1 TEMP: 61C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 PASS, Thread 1, Random Data [Seed 5530D1F5C0B545A0] January 19 2010 07:47:30 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C CORE1 TEMP: 62C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2445 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 PASS, Thread 1, Bit Reverse Address Bottom Up January 19 2010 07:49:37 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2393 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 PASS, Thread 1, Bit Reverse Address Top Down January 19 2010 07:51:43 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C CORE1 TEMP: 59C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2410 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 ÿÿË 7.72GB/S PASS 8.11GB/S PASS 8.28GB/S PASS 8.38GB/S PASS 8.43GB/S PASS 5.96GB/S PASS 8.40GB/S PASS 4.81GB/S PASS 4.77GB/S PASS 4.64GB/S PASS 671.53MB/S PASS 647.60MB/S PASS 640.98MB/S PASS 643.10MB/S PASS 666.26MB/S PASS 647.38MB/S PASS 639.02MB/S PASS 636.68MB/S PASS 654.95MB/S PASS 655.48MB/S PASS 656.97MB/S PASS January 19 2010 07:52:11 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 58C CORE1 TEMP: 58C VCORE: 2C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2410 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 Thread 1 of 1: Running 16 Bit Integer Tests Thread 1 of 1: 16 Bit Integer PASSED Thread 1 of 1: 16 Bit Integer Tests Thread 1 of 1: Running 32 bit Integer Tests Thread 1 of 1: 32 Bit Integer Performance PASSED Thread 1 of 1: 32 Bit Integer Tests Thread 1 of 1: Running 64 Bit Integer Tests Thread 1 of 1: 64 Bit Integer PASSED Thread 1 of 1: 64 Bit Integer Tests January 19 2010 07:59:53 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C CORE1 TEMP: 60C VCORE: 1C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2410 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 57C TEMP3: 57C Create thread: 1 of 1 Thread 1 of 1: Running Single Precision FP Tests Thread 1 of 1: Single Precision FP Performance PASSED Thread 1 of 1: Single Precision Tests Thread 1 of 1: Running Double Precision FP Tests Thread 1 of 1: Double Precision FP PASSED Thread 1 of 1: Double Precision Tests January 19 2010 08:03:43 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 58C CORE1 TEMP: 58C VCORE: 2C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2410 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 56C TEMP3: 56C Create thread: 1 of 1 Thread 1 of 1: Running Disk Tests Thread 1 of 1, Directory:. PASSED 4KB Cached Sync: ./disk_test PASSED 4KB Cached No Sync: ./disk_test PASSED 4KB Direct Sync: ./disk_test PASSED 4KB Direct No Sync: ./disk_test PASSED 16KB Cached Sync: ./disk_test PASSED 16KB Cached No Sync: ./disk_test PASSED 16KB Direct Sync: ./disk_test PASSED 16KB Direct No Sync: ./disk_test PASSED 64KB Cached Sync: ./disk_test PASSED 64KB Cached No Sync: ./disk_test PASSED 64KB Direct Sync: ./disk_test PASSED 64KB Direct No Sync: ./disk_test PASSED 256KB Cached Sync: ./disk_test PASSED 256KB Cached No Sync: ./disk_test PASSED 256KB Direct Sync: ./disk_test PASSED 256KB Direct No Sync: ./disk_test PASSED 1MB Cached Sync: ./disk_test PASSED 1MB Cached No Sync: ./disk_test PASSED 1MB Direct Sync: ./disk_test PASSED 1MB Direct No Sync: ./disk_test PASSED 4MB Cached Sync: ./disk_test PASSED 4MB Cached No Sync: ./disk_test PASSED 4MB Direct Sync: ./disk_test PASSED 4MB Direct No Sync: ./disk_test PASSED 16MB Cached Sync: ./disk_test PASSED 16MB Cached No Sync: ./disk_test PASSED 16MB Direct Sync: ./disk_test PASSED 16MB Direct No Sync: ./disk_test PASSED 64MB Cached Sync: ./disk_test PASSED 64MB Cached No Sync: ./disk_test PASSED 64MB Direct Sync: ./disk_test PASSED 64MB Direct No Sync: ./disk_test January 19 2010 08:04:02 Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 55C CORE1 TEMP: 55C VCORE: 2C FAN1: 0 RPM FAN1_MIN: 73 RPM FAN1_DIV: 128 RPM FAN2: 2410 RPM FAN2_MIN: 2109 RPM FAN2_DIV: 4 RPM FAN3: 4 RPM FAN3_MIN: 4 RPM FAN3_DIV: 4 RPM TEMP1: 33C TEMP2: 54C TEMP3: 54C Temp Sensor Min C Max C CORE0 TEMP: 45 62 CORE1 TEMP: 45 62 VCORE: 1 2 TEMP1: 32 33 TEMP2: 42 57 TEMP3: 42 57 Voltage Sensor Min V Max V Fan Sensor Min RPM Max RPM FAN1: 0 0 FAN1_MIN: 73 73 FAN1_DIV: 128 128 FAN2: 2393 2481 FAN2_MIN: 2109 2109 FAN2_DIV: 4 4 FAN3: 4 4 FAN3_MIN: 4 4 FAN3_DIV: 4 4 PASSED, ran for 2990.08 seconds -- "Fall in those single lines like army ants..." --unknown /\___/\ / /\ /\ \ Phil./Ant @ http://antfarm.ma.cx (Personal Web Site) | |o o| | Ant's Quality Foraged Links: http://aqfl.net \ _ / Nuke ANT from e-mail address: philpi(a)earthlink.netANT ( ) or ANTant(a)zimage.com Ant is currently not listening to any songs on his home computer.
First
|
Prev
|
Next
|
Last
Pages: 1 2 3 Prev: 500 GB Maxtor OneTouch 4 misfunctioning . . . Next: Linux friendly Laptops and Netbooks?? |