High CPU usages and sometimes hard crashes in my Debian/Linux. [Linux Hardware]

Prev: 500 GB Maxtor OneTouch 4 misfunctioning . . .
Next: Linux friendly Laptops and Netbooks??

From: General Schvantzkoph on 19 Jan 2010 13:43

On Tue, 19 Jan 2010 08:07:28 -0800, Ant wrote:

> On 1/19/2010 7:54 AM PT, Ant typed:
>
>> On 1/19/2010 7:02 AM PT, General Schvantzkoph typed:
>>
>>> You might have a CPU cooling problem. Here is a link to sys_basher,
>>> make sure you have lm_sensors and the lm_sensors development package
>>> installed before you build it. sys_basher will stress your CPU and
>>> RAM, if the system crashes you'll have an answer. It will also record
>>> the CPU and motherboard temperatures between each test which will give
>>> you an idea about how hot things are getting before the crash happens.
>>>
>>> http://www.polybus.com/sys_basher_web/
>>
>> Ooh, nice tool! I downloaded, compiled, and ran it for over 30 minutes.
>> So far no crashes, no errors, etc. I will keep it running until I need
>> to go AFK (have to abort). How long are the tests supposed to run? I
>> didn't see it mentioned in its README.
>
> Done! No problems. Copied and pasted its sys_basher.log: sys_basher
> version 1.2.3
> Number of CPUs: 1
> Total RAM: 2.475 GBytes
> Free RAM: 1.061 GBytes
> Total Swap: 2.252 GBytes
> Free Swap: 2.252 GBytes
> Buffer RAM: 228.418 MBytes
> Shared RAM: 0.000 KBytes
> Page Size: 4.000 KBytes
>
> January 19 2010 07:16:29
>
>
> Initial Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 45C
> CORE1 TEMP: 45C
> VCORE: 2C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2481 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 32C
> TEMP2: 42C
> TEMP3: 42C
>
> Allocated Memory: 1.061 GBytes
> Thread 1 of 1: Running Single Precision FP Tests
>
> Thread 1 of 1: Single Precision FP Performance
>
>
>
>
>
>
>
>
>
>
>
>
> PASSED Thread 1 of 1: Single Precision Tests
>
> Thread 1 of 1: Running Double Precision FP Tests
>
> Thread 1 of 1: Double Precision FP
>
>
>
>
>
>
>
>
>
>
>
> PASSED Thread 1 of 1: Double Precision Tests
>
> Thread 1 of 1: Running 16 Bit Integer Tests
>
> Thread 1 of 1: 16 Bit Integer
>
>
>
>
>
>
>
>
>
>
>
>
> PASSED Thread 1 of 1: 16 Bit Integer Tests
>
> Thread 1 of 1: Running 32 bit Integer Tests
>
> Thread 1 of 1: 32 Bit Integer Performance
>
>
>
>
>
>
>
>
>
>
>
>
> PASSED Thread 1 of 1: 32 Bit Integer Tests
>
> Thread 1 of 1: Running 64 Bit Integer Tests
>
> Thread 1 of 1: 64 Bit Integer
>
>
>
>
>
>
>
>
>
>
>
> PASSED Thread 1 of 1: 64 Bit Integer Tests Loop:0 of 1
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Walking One/Zero 0101010101010101
>
> January 19 2010 07:33:08
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C
> CORE1 TEMP: 62C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 32C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Walking One/Zero 0202020202020202
>
> January 19 2010 07:33:14
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C
> CORE1 TEMP: 62C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 32C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Walking One/Zero 0404040404040404
>
> January 19 2010 07:33:20
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 32C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Walking One/Zero 0808080808080808
>
> January 19 2010 07:33:25
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 32C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Walking One/Zero 1010101010101010
>
> January 19 2010 07:33:31
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C
> CORE1 TEMP: 62C
> VCORE: 2C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 32C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Walking One/Zero 2020202020202020
>
> January 19 2010 07:33:36
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 2C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 32C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Walking One/Zero 4040404040404040
>
> January 19 2010 07:33:42
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 32C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Walking One/Zero 8080808080808080
>
> January 19 2010 07:33:47
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 32C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 0000000000000000 0000000000000000
> FFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFF
>
> January 19 2010 07:33:57
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 32C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 1111111111111111 1111111111111111
> EEEEEEEEEEEEEEEE EEEEEEEEEEEEEEEE
>
> January 19 2010 07:34:07
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 32C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 2222222222222222 2222222222222222
> DDDDDDDDDDDDDDDD DDDDDDDDDDDDDDDD
>
> January 19 2010 07:34:17
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 32C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 3333333333333333 3333333333333333
> CCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCC
>
> January 19 2010 07:34:27
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 32C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 4444444444444444 4444444444444444
> BBBBBBBBBBBBBBBB BBBBBBBBBBBBBBBB
>
> January 19 2010 07:34:37
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 32C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 5555555555555555 5555555555555555
> AAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAA
>
> January 19 2010 07:34:47
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 6666666666666666 6666666666666666
> 9999999999999999 9999999999999999
>
> January 19 2010 07:34:57
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 2C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 7777777777777777 7777777777777777
> 8888888888888888 8888888888888888
>
> January 19 2010 07:35:07
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 32C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 0000000000000000 FFFFFFFFFFFFFFFF
> 0000000000000000 FFFFFFFFFFFFFFFF
>
> January 19 2010 07:35:17
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 1111111111111111 EEEEEEEEEEEEEEEE
> 1111111111111111 EEEEEEEEEEEEEEEE
>
> January 19 2010 07:35:27
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C
> CORE1 TEMP: 59C
> VCORE: 2C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 2222222222222222 DDDDDDDDDDDDDDDD
> 2222222222222222 DDDDDDDDDDDDDDDD
>
> January 19 2010 07:35:37
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 3333333333333333 CCCCCCCCCCCCCCCC
> 3333333333333333 CCCCCCCCCCCCCCCC
>
> January 19 2010 07:35:47
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C
> CORE1 TEMP: 59C
> VCORE: 2C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 4444444444444444 BBBBBBBBBBBBBBBB
> 4444444444444444 BBBBBBBBBBBBBBBB
>
> January 19 2010 07:35:57
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C
> CORE1 TEMP: 59C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 5555555555555555 AAAAAAAAAAAAAAAA
> 5555555555555555 AAAAAAAAAAAAAAAA
>
> January 19 2010 07:36:07
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C
> CORE1 TEMP: 59C
> VCORE: 2C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 6666666666666666 9999999999999999
> 6666666666666666 9999999999999999
>
> January 19 2010 07:36:16
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Patterns: 7777777777777777 8888888888888888
> 7777777777777777 8888888888888888
>
> January 19 2010 07:36:26
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 0
>
> January 19 2010 07:36:40
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 1
>
> January 19 2010 07:36:53
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 2
>
> January 19 2010 07:37:07
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 3
>
> January 19 2010 07:37:20
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 4
>
> January 19 2010 07:37:33
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 5
>
> January 19 2010 07:37:47
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 6
>
> January 19 2010 07:38:00
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 2C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 7
>
> January 19 2010 07:38:14
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 8
>
> January 19 2010 07:38:27
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 9
>
> January 19 2010 07:38:40
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 10
>
> January 19 2010 07:38:54
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 11
>
> January 19 2010 07:39:07
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 12
>
> January 19 2010 07:39:21
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 13
>
> January 19 2010 07:39:34
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C
> CORE1 TEMP: 62C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 14
>
> January 19 2010 07:39:47
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 2C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 15
>
> January 19 2010 07:40:01
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 16
>
> January 19 2010 07:40:14
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 17
>
> January 19 2010 07:40:28
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 18
>
> January 19 2010 07:40:41
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 19
>
> January 19 2010 07:40:54
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2410 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 20
>
> January 19 2010 07:41:08
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2393 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 21
>
> January 19 2010 07:41:21
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2410 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 22
>
> January 19 2010 07:41:35
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2393 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 23
>
> January 19 2010 07:41:48
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2393 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 24
>
> January 19 2010 07:42:01
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C
> CORE1 TEMP: 62C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2393 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 25
>
> January 19 2010 07:42:15
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2393 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 26
>
> January 19 2010 07:42:28
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C
> CORE1 TEMP: 62C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2410 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 27
>
> January 19 2010 07:42:42
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C
> CORE1 TEMP: 62C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2410 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 28
>
> January 19 2010 07:42:55
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C
> CORE1 TEMP: 62C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 29
>
> January 19 2010 07:43:08
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 30
>
> January 19 2010 07:43:22
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> PASS, Thread 1, Pattern: Data = Addr << 31
>
> January 19 2010 07:43:35
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C
> CORE1 TEMP: 62C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Multi Bank Test (2 banks)
>
> January 19 2010 07:43:42
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C
> CORE1 TEMP: 62C
> VCORE: 2C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> PASS, Thread 1, Multi Bank Test (3 banks)
>
> January 19 2010 07:43:52
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Multi Bank Test (4 banks)
>
> January 19 2010 07:44:03
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Multi Bank Test (5 banks)
>
> January 19 2010 07:44:09
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> PASS, Thread 1, Multi Bank Test (6 banks)
>
> January 19 2010 07:44:20
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Multi Bank Test (7 banks)
>
> January 19 2010 07:44:27
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Multi Bank Test (8 banks)
>
> January 19 2010 07:44:37
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Multi Bank Test (9 banks)
>
> January 19 2010 07:44:45
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Multi Bank Test (10 banks)
>
> January 19 2010 07:44:52
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Multi Bank Test (11 banks)
>
> January 19 2010 07:44:59
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Multi Bank Test (12 banks)
>
> January 19 2010 07:45:12
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C
> CORE1 TEMP: 59C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Multi Bank Test (13 banks)
>
> January 19 2010 07:45:19
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C
> CORE1 TEMP: 59C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Multi Bank Test (14 banks)
>
> January 19 2010 07:45:26
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Multi Bank Test (15 banks)
>
> January 19 2010 07:45:34
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C
> CORE1 TEMP: 59C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Memory Refresh
>
> January 19 2010 07:46:39
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 2C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Random Data [Seed 110D5A4544145B40]
>
> January 19 2010 07:46:46
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Random Data [Seed 55FF04EBBA400647]
>
> January 19 2010 07:46:53
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 2C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Random Data [Seed 89C8DDC8FA8889C9]
>
> January 19 2010 07:47:01
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2463 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Random Data [Seed C507518781540387]
>
> January 19 2010 07:47:08
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C
> CORE1 TEMP: 62C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Random Data [Seed EBAAFABB957E81D1]
>
> January 19 2010 07:47:16
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> PASS, Thread 1, Random Data [Seed 56D001050D9C9011]
>
> January 19 2010 07:47:23
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 61C
> CORE1 TEMP: 61C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> PASS, Thread 1, Random Data [Seed 5530D1F5C0B545A0]
>
> January 19 2010 07:47:30
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 62C
> CORE1 TEMP: 62C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2445 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> PASS, Thread 1, Bit Reverse Address Bottom Up
>
> January 19 2010 07:49:37
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2393 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> PASS, Thread 1, Bit Reverse Address Top Down
>
> January 19 2010 07:51:43
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 59C
> CORE1 TEMP: 59C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2410 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
> ÿÿË
> 7.72GB/S PASS
> 8.11GB/S PASS
> 8.28GB/S PASS
> 8.38GB/S PASS
> 8.43GB/S PASS
> 5.96GB/S PASS
> 8.40GB/S PASS
> 4.81GB/S PASS
> 4.77GB/S PASS
> 4.64GB/S PASS
> 671.53MB/S PASS
> 647.60MB/S PASS
> 640.98MB/S PASS
> 643.10MB/S PASS
> 666.26MB/S PASS
> 647.38MB/S PASS
> 639.02MB/S PASS
> 636.68MB/S PASS
> 654.95MB/S PASS
> 655.48MB/S PASS
> 656.97MB/S PASS
>
> January 19 2010 07:52:11
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 58C
> CORE1 TEMP: 58C
> VCORE: 2C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2410 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
>
> Thread 1 of 1: Running 16 Bit Integer Tests
>
> Thread 1 of 1: 16 Bit Integer
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> PASSED Thread 1 of 1: 16 Bit Integer Tests
>
> Thread 1 of 1: Running 32 bit Integer Tests
>
> Thread 1 of 1: 32 Bit Integer Performance
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> PASSED Thread 1 of 1: 32 Bit Integer Tests
>
> Thread 1 of 1: Running 64 Bit Integer Tests
>
> Thread 1 of 1: 64 Bit Integer
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> PASSED Thread 1 of 1: 64 Bit Integer Tests
>
> January 19 2010 07:59:53
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 60C
> CORE1 TEMP: 60C
> VCORE: 1C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2410 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 57C
> TEMP3: 57C
>
> Create thread: 1 of 1
> Thread 1 of 1: Running Single Precision FP Tests
>
> Thread 1 of 1: Single Precision FP Performance
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> PASSED Thread 1 of 1: Single Precision Tests
>
> Thread 1 of 1: Running Double Precision FP Tests
>
> Thread 1 of 1: Double Precision FP
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> PASSED Thread 1 of 1: Double Precision Tests
>
> January 19 2010 08:03:43
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 58C
> CORE1 TEMP: 58C
> VCORE: 2C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2410 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 56C
> TEMP3: 56C
>
> Create thread: 1 of 1
>
> Thread 1 of 1: Running Disk Tests
>
> Thread 1 of 1, Directory:.
>
>
>
>
>
>
>
>
>
>
>
>
>
> PASSED 4KB Cached Sync: ./disk_test
> PASSED 4KB Cached No Sync: ./disk_test PASSED 4KB Direct Sync:
> ./disk_test
> PASSED 4KB Direct No Sync: ./disk_test PASSED 16KB Cached Sync:
> ./disk_test
> PASSED 16KB Cached No Sync: ./disk_test PASSED 16KB Direct Sync:
> ./disk_test
> PASSED 16KB Direct No Sync: ./disk_test PASSED 64KB Cached Sync:
> ./disk_test
> PASSED 64KB Cached No Sync: ./disk_test PASSED 64KB Direct Sync:
> ./disk_test
> PASSED 64KB Direct No Sync: ./disk_test PASSED 256KB Cached Sync:
> ./disk_test PASSED 256KB Cached No Sync: ./disk_test PASSED 256KB
Direct
> Sync: ./disk_test PASSED 256KB Direct No Sync: ./disk_test
PASSED 1MB
> Cached Sync: ./disk_test
> PASSED 1MB Cached No Sync: ./disk_test PASSED 1MB Direct Sync:
> ./disk_test
> PASSED 1MB Direct No Sync: ./disk_test PASSED 4MB Cached Sync:
> ./disk_test
> PASSED 4MB Cached No Sync: ./disk_test PASSED 4MB Direct Sync:
> ./disk_test
> PASSED 4MB Direct No Sync: ./disk_test PASSED 16MB Cached Sync:
> ./disk_test
> PASSED 16MB Cached No Sync: ./disk_test PASSED 16MB Direct Sync:
> ./disk_test
> PASSED 16MB Direct No Sync: ./disk_test PASSED 64MB Cached Sync:
> ./disk_test
> PASSED 64MB Cached No Sync: ./disk_test PASSED 64MB Direct Sync:
> ./disk_test
> PASSED 64MB Direct No Sync: ./disk_test
>
> January 19 2010 08:04:02
>
>
> Temperatures, Voltages and Fan Speeds: CORE0 TEMP: 55C
> CORE1 TEMP: 55C
> VCORE: 2C
>
> FAN1: 0 RPM
> FAN1_MIN: 73 RPM
> FAN1_DIV: 128 RPM
> FAN2: 2410 RPM
> FAN2_MIN: 2109 RPM
> FAN2_DIV: 4 RPM
> FAN3: 4 RPM
> FAN3_MIN: 4 RPM
> FAN3_DIV: 4 RPM
>
> TEMP1: 33C
> TEMP2: 54C
> TEMP3: 54C
>
>
> Temp Sensor Min C Max C
> CORE0 TEMP: 45 62
> CORE1 TEMP: 45 62
> VCORE: 1 2
> TEMP1: 32 33
> TEMP2: 42 57
> TEMP3: 42 57
>
> Voltage Sensor Min V Max V
>
> Fan Sensor Min RPM Max RPM
> FAN1: 0 0
> FAN1_MIN: 73 73
> FAN1_DIV: 128 128
> FAN2: 2393 2481
> FAN2_MIN: 2109 2109
> FAN2_DIV: 4 4
> FAN3: 4 4
> FAN3_MIN: 4 4
> FAN3_DIV: 4 4
>
> PASSED, ran for 2990.08 seconds

Those temps don't look terrible, try running sys_basher for an hour. Use
the -ho switch

sys_basher -ho 1

From: ANTant on 19 Jan 2010 14:49

> Those temps don't look terrible, try running sys_basher for an hour. Use
> the -ho switch
> sys_basher -ho 1

Well, my first test ran for an hour. Also, I have seen the crashes happen
during nice temperatures (look at previous posts). I don't think it is a
heat problem.
--
"We are anthill men upon an anthill world." --Ray Bradbury
/\___/\
/ /\ /\ \ Phillip (Ant) @ http://antfarm.ma.cx (Personal Web Site)
| |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net
\ _ / Please remove ANT if replying by e-mail.
( )

First | Prev |
Pages: 1 2 3
Prev: 500 GB Maxtor OneTouch 4 misfunctioning . . .
Next: Linux friendly Laptops and Netbooks??