Prev: Backup fails with Volume Shadow Copy Error
Next: Error 170: The requested resource is in use
From: Attila on 9 Jun 2006 08:57
Ok, I tried your recommendations, even got the hotfix, which by the way told
me I do not have ISA 2004 installed. In reallity, what it was saying is that
it cannot install in ISA 2004 SP2, as when I removed SP2 for ISA, it
installed, but the problem did not get fixed.

I called SBS Support, Business Critical, but were met with some of the most
incompetent techs I have ever talked to. After they wasted 4.5 hours, I
gave, I even reinstalled ISA 2004, but the ISA Service still won't start. No
offence to you, I hope I just got some bad techs. Im certain there are
competentn people on staff also. Time for a rebuild? It would certainly stop
wasting my time.

Attila


""Crina Li"" <v-crinal(a)online.microsoft.com> wrote in message
news:ww9z9F6iGHA.5720(a)TK2MSFTNGXA01.phx.gbl...
> Hi Attila,
>
> Thanks for your update.
>
> If this issue still occurs, let's do as following:.
>
> 1. Delete all the web publishing rules.
> 2. Locate the SBS companyWeb listener and SBS Web listener in the Network
> Objects (You can click Firewall Policy and then click Toolbox on the right
> pane.) in the ISA 2004 console.
> 3. Please export and delete the SBS CompanyWeb Listener.
> 4. Open the Properties page of SBS Web Listener and in the Preferences
> tab,
> please click to clear the check mark of Enable SSL. Click OK.
> 5. Apply the settings.
> 6. Try to start ISA service again and see if the issue will be reproduced.
>
> If we could start the ISA service, let's recreate new certificate in the
> CEICW wizard. You could create a new certificate with different name and
> see if things could be improved.
>
> I will look forward to hearing from you.
>
> Best regards,
>
> Crina Li (MSFT)
>
> Microsoft CSS Online Newsgroup Support
>
> Get Secure! - www.microsoft.com/security
>
> =====================================================
> This newsgroup only focuses on SBS technical issues. If you have issues
> regarding other Microsoft products, you'd better post in the corresponding
> newsgroups so that they can be resolved in an efficient and timely manner.
> You can locate the newsgroup here:
> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
>
> When opening a new thread via the web interface, we recommend you check
> the
> "Notify me of replies" box to receive e-mail notifications when there are
> any updates in your thread. When responding to posts via your newsreader,
> please "Reply to Group" so that others may learn and benefit from your
> issue.
>
> Microsoft engineers can only focus on one issue per thread. Although we
> provide other information for your reference, we recommend you post
> different incidents in different threads to keep the thread clean. In
> doing
> so, it will ensure your issues are resolved in a timely manner.
>
> For urgent issues, you may want to contact Microsoft CSS directly. Please
> check http://support.microsoft.com for regional support phone numbers.
>
> Any input or comments in this thread are highly appreciated.
>
> =====================================================
>
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
> --------------------
> | From: "Attila" <acsokai((@))gtnconsultig.com>
> | References: <#YENoidiGHA.3900(a)TK2MSFTNGP05.phx.gbl>
> <BEC#ZjsiGHA.1124(a)TK2MSFTNGXA01.phx.gbl>
> | Subject: Re: ISA Proxy Failure
> | Date: Thu, 8 Jun 2006 09:12:20 -0400
> | Lines: 206
> | X-Priority: 3
> | X-MSMail-Priority: Normal
> | X-Newsreader: Microsoft Outlook Express 6.00.2900.2869
> | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869
> | X-RFC2646: Format=Flowed; Original
> | Message-ID: <#b3ut0viGHA.5036(a)TK2MSFTNGP04.phx.gbl>
> | Newsgroups: microsoft.public.windows.server.sbs
> | NNTP-Posting-Host: dspacsokait60.mac.cc.cmu.edu 128.2.29.24
> | Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP04.phx.gbl
> | Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:273766
> | X-Tomcat-NG: microsoft.public.windows.server.sbs
> |
> | Thank you so much for helping. As a SBS Partner, its important that I
> get
> | this fixed, as its my own server, and better for me to experience this
> then
> | my clients.
> |
> | Prior to your posting, I came across your first suggested fix already,
> | namely:
> | 837864 The Microsoft Firewall service does not start and event ID 7024
> is
> | logged in the system event log of the computer that is running ISA
> Server
> | 2004
> | http://support.microsoft.com/default.aspx?scid=kb;EN-US;837864
> |
> | BTW, I do have SP for ISA 2004 installed.
> | So here is what happened. It partially fixed the problem. In order to be
> | able to start the Webn Proxy Service, I had to disable all the Web
> | Publishing Rules. After the service started, I reenabled the four Web
> | Publishing Rules, but two of them compained that thought they started,
> they
> | could not be added to the database. Following this, I ran the CEICW,
> with
> | Firewall Enabled selected, but it failed on the Network Configuration,
> | however, was able to configure the rest. I ran the CEICW again, Firewall
> | Disabled, and it was able to configure all settings including Network
> | Configuration fine. However, OWA, RWA is still not possible from
> outside,
> | though luckily SMTP mail does come in.
> |
> | Next I deleted all four web publishing rules in ISA, ran the CEICW
> again,
> | but it repeated the same scenario above, if Firewall Enabled was
> selected
> | then Network Config failed, and if Firewall Disabled ws selected, the
> CEICW
> | completed fine.
> |
> | To note, in no case was I able to restart the ISA Proxy Service without
> | first disabling all four Web Publishing Rules, including after many
> reboots.
> |
> | Tonight, Im going to try your suggestion #2, 896495 The Firewall service
> may
> | not start in Internet Security and Acceleration (ISA) Server 2004 after
> you
> | select a certificate for a, SSL listener
> | http://support.microsoft.com/default.aspx?scid=kb;EN-US;896495
> | and let you know. I just got the hotfix mentioned in the article and
> will
> | apply it tonight.
> |
> | Thanks, and I will update you tomorrow.
> |
> | Attila
> |
> |
> | ""Crina Li"" <v-crinal(a)online.microsoft.com> wrote in message
> | news:BEC%23ZjsiGHA.1124(a)TK2MSFTNGXA01.phx.gbl...
> | > Hi Attila,
> | >
> | > Thank you for posting in SBS newsgroup.
> | >
> | > From your description, I understand the issue to be: You can not
> connect
> | > to
> | > SBS and internet from client and got event 14060 and 14127 on server
> after
> | > a power failure. If I have misunderstood your concerns, please do not
> | > hesitate to let me know.
> | >
> | > Please check the following KB articles to see if they help:
> | >
> | > 837864 The Microsoft Firewall service does not start and event ID 7024
> is
> | > logged in the system event log of the computer that is running ISA
> Server
> | > 2004
> | > http://support.microsoft.com/default.aspx?scid=kb;EN-US;837864
> | >
> | > 896495 The Firewall service may not start in Internet Security and
> | > Acceleration (ISA) Server 2004 after you select a certificate for a,
> SSL
> | > listener
> | > http://support.microsoft.com/default.aspx?scid=kb;EN-US;896495
> | >
> | > If the issue still occurs, please try to rerun CEICW follow the below
> | > steps:
> | >
> | > 1. On the SBS 2003 Server open the Server Management console. Go to
> | > Standard Management\To Do List.
> | > 2. Click the "Connect to the Internet" link.
> | > 3. Choose not to change the connection type and click Next. On the
> | > Firewall
> | > page, select "Enable firewall" and click Next.
> | > 4. On the "Services Configuration" page, select all the items and then
> | > click Next.
> | > 5. On the "Web Services Configuration" page, make sure "Allow access
> to
> | > the
> | > entire Web site from the Internet" is selected. If you select "Allow
> | > access
> | > to only the following Web site services from the Internet", make sure
> the
> | > web sites you want to publish are selected. Click Next.
> | > 6. On the "Web Server Certificate" page, choose to create a new Web
> server
> | > certificate and then type the public FQDN of SBS.
> | > 7. Go through the remaining steps.
> | > 8. If you have a router or hardware firewall, configure it to forward
> | > inbound traffic on TCP port 80 and 443 to the SBS server's external
> | > address.
> | >
> | > 825763 How to configure Internet access in Windows Small Business
> Server
> | > 2003
> | > http://support.microsoft.com/?id=825763
> | >
> | > If it does not help, would you please help me collect the following
> | > information?
> | >
> | > 1. Have you installed ISA 2004 SP2?
> | > 2. Please disable SSL on the web listeners and test this issue.
> | >
> | > I appreciate your time and look forward to hearing from you.
> | >
> | > Best regards,
> | >
> | > Crina Li (MSFT)
> | >
> | > Microsoft CSS Online Newsgroup Support
> | >
> | > Get Secure! - www.microsoft.com/security
> | >
> | > =====================================================
> | > This newsgroup only focuses on SBS technical issues. If you have
> issues
> | > regarding other Microsoft products, you'd better post in the
> corresponding
> | > newsgroups so that they can be resolved in an efficient and timely
> manner.
> | > You can locate the newsgroup here:
> | > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
> | >
> | > When opening a new thread via the web interface, we recommend you
> check
> | > the
> | > "Notify me of replies" box to receive e-mail notifications when there
> are
> | > any updates in your thread. When responding to posts via your
> newsreader,
> | > please "Reply to Group" so that others may learn and benefit from your
> | > issue.
> | >
> | > Microsoft engineers can only focus on one issue per thread. Although
> we
> | > provide other information for your reference, we recommend you post
> | > different incidents in different threads to keep the thread clean. In
> | > doing
> | > so, it will ensure your issues are resolved in a timely manner.
> | >
> | > For urgent issues, you may want to contact Microsoft CSS directly.
> Please
> | > check http://support.microsoft.com for regional support phone numbers.
> | >
> | > Any input or comments in this thread are highly appreciated.
> | >
> | > =====================================================
> | >
> | > This posting is provided "AS IS" with no warranties, and confers no
> | > rights.
> | > --------------------
> | > | From: "ACsokai" <acsokai(a)andrew.cmu.edu>
> | > | Subject: ISA Proxy Failure
> | > | Date: Tue, 6 Jun 2006 22:18:23 -0400
> | > | Lines: 37
> | > | X-Priority: 3
> | > | X-MSMail-Priority: Normal
> | > | X-Newsreader: Microsoft Outlook Express 6.00.3790.2663
> | > | X-RFC2646: Format=Flowed; Original
> | > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2663
> | > | Message-ID: <#YENoidiGHA.3900(a)TK2MSFTNGP05.phx.gbl>
> | > | Newsgroups: microsoft.public.windows.server.sbs
> | > | NNTP-Posting-Host: pool-71-253-54-19.pitbpa.east.verizon.net
> | > 71.253.54.19
> | > | Path:
> TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP05.phx.gbl
> | > | Xref: TK2MSFTNGXA01.phx.gbl
> microsoft.public.windows.server.sbs:273397
> | > | X-Tomcat-NG: microsoft.public.windows.server.sbs
> | > |
> | > | I had a power failure on the server today, due to cable unplugged
> (small
> | > | server, single power supply).
> | > |
> | > | Upon startup, we relized that we cannot reach the server or the
> | > Internet.
> | > | Event Viewer shows the following failures. I rebooted the server a
> | > number
> | > of
> | > | times, restarted all ISA services, attempted to start the ISA
> | > ProxyService,
> | > | but it fails, logging the errors below. I ran the connection wizard
> | > again,
> | > | but no use. What else can I do to fix this?
> | > | Thanks for the help,
> | > | Attila
> | > |
> | > | Event Type: Error
> | > | Event Source: Microsoft Firewall
> | > | Event Category: None
> | > | Event ID: 14060
> | > | Date: 6/6/2006
> | > | Time: 10:06:59 PM
> | > | User: N/A
> | > | Computer: Server1:
> | > | Description:
> | > | Cannot load an application filter Web Proxy Filter
> | > | ({4CB7513E-220E-4C20-815A-B67BAA295FF4}). FilterInit failed with
> code
> | > | 0x80070005. To attempt to activate this application filter again,
> stop
> | > and
> | > | restart the Firewall service.
> | > |
> | > | Event Type: Error
> | > | Event Source: Microsoft ISA Server Web Proxy
> | > | Event Category: None
> | > | Event ID: 14127
> | > | Date: 6/6/2006
> | > | Time: 10:06:59 PM
> | > | User: N/A
> | > | Computer: Server1:
> | > | The Web Proxy filter could not initialize (error code
> | > 505.112.4.0.2165.594).
> | > |
> | > |
> | > |
> | > |
> | >
> |
> |
> |
>


From: "Crina Li" on 11 Jun 2006 23:25
Hi Attila,

Thanks for your update.

I am sorry for the delayed response due to weekend. Please understand that
the newsgroups are staffed weekdays by Microsoft Support professionals to
answer your systems and applications questions. Your understanding is
greatly appreciated!

Due to the complexity of this issue, we are unable to assist with this
request in newsgroup. To save your time, you may still need to contact CSS
for better support. I also recommend you to contact our BCPS support.
Business-Critical Phone Support (BCPS) provides you with technical phone
support at no charge during critical LAN outages or "business down"
situations. This benefit is available 24 hours a day, 7 days a week to all
Microsoft technology partners in the United States and Canada.

This and other support options are available here:
BCPS:
https://partner.microsoft.com/US/technicalsupport/supportoverview/40010469
Others: https://partner.microsoft.com/US/technicalsupport/supportoverview/

If you are outside the United States, please visit our International
Support page: http://support.microsoft.com/common/international.aspx.

If you've not able to contact them, another suggestion would be to still
contact Microsoft Product Support Services via telephone so that a
dedicated Support Professional can assist with your request. Please be
advised that contacting phone support will be a charged call.

To obtain the phone numbers for specific technology request please take a
look at the web site listed below.
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS

If you are outside the US please see http://support.microsoft.com for
regional support phone numbers.

Your understanding will be highly appreciated.

Best regards,

Crina Li (MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.

=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| From: "Attila" <acsokai((@))gtnconsultig.com>
| References: <#YENoidiGHA.3900(a)TK2MSFTNGP05.phx.gbl>
<BEC#ZjsiGHA.1124(a)TK2MSFTNGXA01.phx.gbl>
<#b3ut0viGHA.5036(a)TK2MSFTNGP04.phx.gbl>
<ww9z9F6iGHA.5720(a)TK2MSFTNGXA01.phx.gbl>
| Subject: Re: ISA Proxy Failure
| Date: Fri, 9 Jun 2006 08:57:12 -0400
| Lines: 342
| X-Priority: 3
| X-MSMail-Priority: Normal
| X-Newsreader: Microsoft Outlook Express 6.00.2900.2869
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869
| X-RFC2646: Format=Flowed; Original
| Message-ID: <#2iy6Q8iGHA.3496(a)TK2MSFTNGP02.phx.gbl>
| Newsgroups: microsoft.public.windows.server.sbs
| NNTP-Posting-Host: dspacsokait60.mac.cc.cmu.edu 128.2.29.24
| Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP02.phx.gbl
| Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:274047
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| Ok, I tried your recommendations, even got the hotfix, which by the way
told
| me I do not have ISA 2004 installed. In reallity, what it was saying is
that
| it cannot install in ISA 2004 SP2, as when I removed SP2 for ISA, it
| installed, but the problem did not get fixed.
|
| I called SBS Support, Business Critical, but were met with some of the
most
| incompetent techs I have ever talked to. After they wasted 4.5 hours, I
| gave, I even reinstalled ISA 2004, but the ISA Service still won't start.
No
| offence to you, I hope I just got some bad techs. Im certain there are
| competentn people on staff also. Time for a rebuild? It would certainly
stop
| wasting my time.
|
| Attila
|
|
| ""Crina Li"" <v-crinal(a)online.microsoft.com> wrote in message
| news:ww9z9F6iGHA.5720(a)TK2MSFTNGXA01.phx.gbl...
| > Hi Attila,
| >
| > Thanks for your update.
| >
| > If this issue still occurs, let's do as following:.
| >
| > 1. Delete all the web publishing rules.
| > 2. Locate the SBS companyWeb listener and SBS Web listener in the
Network
| > Objects (You can click Firewall Policy and then click Toolbox on the
right
| > pane.) in the ISA 2004 console.
| > 3. Please export and delete the SBS CompanyWeb Listener.
| > 4. Open the Properties page of SBS Web Listener and in the Preferences
| > tab,
| > please click to clear the check mark of Enable SSL. Click OK.
| > 5. Apply the settings.
| > 6. Try to start ISA service again and see if the issue will be
reproduced.
| >
| > If we could start the ISA service, let's recreate new certificate in the
| > CEICW wizard. You could create a new certificate with different name and
| > see if things could be improved.
| >
| > I will look forward to hearing from you.
| >
| > Best regards,
| >
| > Crina Li (MSFT)
| >
| > Microsoft CSS Online Newsgroup Support
| >
| > Get Secure! - www.microsoft.com/security
| >
| > =====================================================
| > This newsgroup only focuses on SBS technical issues. If you have issues
| > regarding other Microsoft products, you'd better post in the
corresponding
| > newsgroups so that they can be resolved in an efficient and timely
manner.
| > You can locate the newsgroup here:
| > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| >
| > When opening a new thread via the web interface, we recommend you check
| > the
| > "Notify me of replies" box to receive e-mail notifications when there
are
| > any updates in your thread. When responding to posts via your
newsreader,
| > please "Reply to Group" so that others may learn and benefit from your
| > issue.
| >
| > Microsoft engineers can only focus on one issue per thread. Although we
| > provide other information for your reference, we recommend you post
| > different incidents in different threads to keep the thread clean. In
| > doing
| > so, it will ensure your issues are resolved in a timely manner.
| >
| > For urgent issues, you may want to contact Microsoft CSS directly.
Please
| > check http://support.microsoft.com for regional support phone numbers.
| >
| > Any input or comments in this thread are highly appreciated.
| >
| > =====================================================
| >
| > This posting is provided "AS IS" with no warranties, and confers no
| > rights.
| > --------------------
| > | From: "Attila" <acsokai((@))gtnconsultig.com>
| > | References: <#YENoidiGHA.3900(a)TK2MSFTNGP05.phx.gbl>
| > <BEC#ZjsiGHA.1124(a)TK2MSFTNGXA01.phx.gbl>
| > | Subject: Re: ISA Proxy Failure
| > | Date: Thu, 8 Jun 2006 09:12:20 -0400
| > | Lines: 206
| > | X-Priority: 3
| > | X-MSMail-Priority: Normal
| > | X-Newsreader: Microsoft Outlook Express 6.00.2900.2869
| > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869
| > | X-RFC2646: Format=Flowed; Original
| > | Message-ID: <#b3ut0viGHA.5036(a)TK2MSFTNGP04.phx.gbl>
| > | Newsgroups: microsoft.public.windows.server.sbs
| > | NNTP-Posting-Host: dspacsokait60.mac.cc.cmu.edu 128.2.29.24
| > | Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP04.phx.gbl
| > | Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:273766
| > | X-Tomcat-NG: microsoft.public.windows.server.sbs
| > |
| > | Thank you so much for helping. As a SBS Partner, its important that I
| > get
| > | this fixed, as its my own server, and better for me to experience this
| > then
| > | my clients.
| > |
| > | Prior to your posting, I came across your first suggested fix already,
| > | namely:
| > | 837864 The Microsoft Firewall service does not start and event ID
7024
| > is
| > | logged in the system event log of the computer that is running ISA
| > Server
| > | 2004
| > | http://support.microsoft.com/default.aspx?scid=kb;EN-US;837864
| > |
| > | BTW, I do have SP for ISA 2004 installed.
| > | So here is what happened. It partially fixed the problem. In order to
be
| > | able to start the Webn Proxy Service, I had to disable all the Web
| > | Publishing Rules. After the service started, I reenabled the four Web
| > | Publishing Rules, but two of them compained that thought they started,
| > they
| > | could not be added to the database. Following this, I ran the CEICW,
| > with
| > | Firewall Enabled selected, but it failed on the Network Configuration,
| > | however, was able to configure the rest. I ran the CEICW again,
Firewall
| > | Disabled, and it was able to configure all settings including Network
| > | Configuration fine. However, OWA, RWA is still not possible from
| > outside,
| > | though luckily SMTP mail does come in.
| > |
| > | Next I deleted all four web publishing rules in ISA, ran the CEICW
| > again,
| > | but it repeated the same scenario above, if Firewall Enabled was
| > selected
| > | then Network Config failed, and if Firewall Disabled ws selected, the
| > CEICW
| > | completed fine.
| > |
| > | To note, in no case was I able to restart the ISA Proxy Service
without
| > | first disabling all four Web Publishing Rules, including after many
| > reboots.
| > |
| > | Tonight, Im going to try your suggestion #2, 896495 The Firewall
service
| > may
| > | not start in Internet Security and Acceleration (ISA) Server 2004
after
| > you
| > | select a certificate for a, SSL listener
| > | http://support.microsoft.com/default.aspx?scid=kb;EN-US;896495
| > | and let you know. I just got the hotfix mentioned in the article and
| > will
| > | apply it tonight.
| > |
| > | Thanks, and I will update you tomorrow.
| > |
| > | Attila
| > |
| > |
| > | ""Crina Li"" <v-crinal(a)online.microsoft.com> wrote in message
| > | news:BEC%23ZjsiGHA.1124(a)TK2MSFTNGXA01.phx.gbl...
| > | > Hi Attila,
| > | >
| > | > Thank you for posting in SBS newsgroup.
| > | >
| > | > From your description, I understand the issue to be: You can not
| > connect
| > | > to
| > | > SBS and internet from client and got event 14060 and 14127 on server
| > after
| > | > a power failure. If I have misunderstood your concerns, please do
not
| > | > hesitate to let me know.
| > | >
| > | > Please check the following KB articles to see if they help:
| > | >
| > | > 837864 The Microsoft Firewall service does not start and event ID
7024
| > is
| > | > logged in the system event log of the computer that is running ISA
| > Server
| > | > 2004
| > | > http://support.microsoft.com/default.aspx?scid=kb;EN-US;837864
| > | >
| > | > 896495 The Firewall service may not start in Internet Security and
| > | > Acceleration (ISA) Server 2004 after you select a certificate for
a,
| > SSL
| > | > listener
| > | > http://support.microsoft.com/default.aspx?scid=kb;EN-US;896495
| > | >
| > | > If the issue still occurs, please try to rerun CEICW follow the
below
| > | > steps:
| > | >
| > | > 1. On the SBS 2003 Server open the Server Management console. Go to
| > | > Standard Management\To Do List.
| > | > 2. Click the "Connect to the Internet" link.
| > | > 3. Choose not to change the connection type and click Next. On the
| > | > Firewall
| > | > page, select "Enable firewall" and click Next.
| > | > 4. On the "Services Configuration" page, select all the items and
then
| > | > click Next.
| > | > 5. On the "Web Services Configuration" page, make sure "Allow
access
| > to
| > | > the
| > | > entire Web site from the Internet" is selected. If you select "Allow
| > | > access
| > | > to only the following Web site services from the Internet", make
sure
| > the
| > | > web sites you want to publish are selected. Click Next.
| > | > 6. On the "Web Server Certificate" page, choose to create a new Web
| > server
| > | > certificate and then type the public FQDN of SBS.
| > | > 7. Go through the remaining steps.
| > | > 8. If you have a router or hardware firewall, configure it to
forward
| > | > inbound traffic on TCP port 80 and 443 to the SBS server's external
| > | > address.
| > | >
| > | > 825763 How to configure Internet access in Windows Small Business
| > Server
| > | > 2003
| > | > http://support.microsoft.com/?id=825763
| > | >
| > | > If it does not help, would you please help me collect the following
| > | > information?
| > | >
| > | > 1. Have you installed ISA 2004 SP2?
| > | > 2. Please disable SSL on the web listeners and test this issue.
| > | >
| > | > I appreciate your time and look forward to hearing from you.
| > | >
| > | > Best regards,
| > | >
| > | > Crina Li (MSFT)
| > | >
| > | > Microsoft CSS Online Newsgroup Support
| > | >
| > | > Get Secure! - www.microsoft.com/security
| > | >
| > | > =====================================================
| > | > This newsgroup only focuses on SBS technical issues. If you have
| > issues
| > | > regarding other Microsoft products, you'd better post in the
| > corresponding
| > | > newsgroups so that they can be resolved in an efficient and timely
| > manner.
| > | > You can locate the newsgroup here:
| > | > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| > | >
| > | > When opening a new thread via the web interface, we recommend you
| > check
| > | > the
| > | > "Notify me of replies" box to receive e-mail notifications when
there
| > are
| > | > any updates in your thread. When responding to posts via your
| > newsreader,
| > | > please "Reply to Group" so that others may learn and benefit from
your
| > | > issue.
| > | >
| > | > Microsoft engineers can only focus on one issue per thread.
Although
| > we
| > | > provide other information for your reference, we recommend you post
| > | > different incidents in different threads to keep the thread clean.
In
| > | > doing
| > | > so, it will ensure your issues are resolved in a timely manner.
| > | >
| > | > For urgent issues, you may want to contact Microsoft CSS directly.
| > Please
| > | > check http://support.microsoft.com for regional support phone
numbers.
| > | >
| > | > Any input or comments in this thread are highly appreciated.
| > | >
| > | > =====================================================
| > | >
| > | > This posting is provided "AS IS" with no warranties, and confers no
| > | > rights.
| > | > --------------------
| > | > | From: "ACsokai" <acsokai(a)andrew.cmu.edu>
| > | > | Subject: ISA Proxy Failure
| > | > | Date: Tue, 6 Jun 2006 22:18:23 -0400
| > | > | Lines: 37
| > | > | X-Priority: 3
| > | > | X-MSMail-Priority: Normal
| > | > | X-Newsreader: Microsoft Outlook Express 6.00.3790.2663
| > | > | X-RFC2646: Format=Flowed; Original
| > | > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2663
| > | > | Message-ID: <#YENoidiGHA.3900(a)TK2MSFTNGP05.phx.gbl>
| > | > | Newsgroups: microsoft.public.windows.server.sbs
| > | > | NNTP-Posting-Host: pool-71-253-54-19.pitbpa.east.verizon.net
| > | > 71.253.54.19
| > | > | Path:
| > TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP05.phx.gbl
| > | > | Xref: TK2MSFTNGXA01.phx.gbl
| > microsoft.public.windows.server.sbs:273397
| > | > | X-Tomcat-NG: microsoft.public.windows.server.sbs
| > | > |
| > | > | I had a power failure on the server today, due to cable unplugged
| > (small
| > | > | server, single power supply).
| > | > |
| > | > | Upon startup, we relized that we cannot reach the server or the
| > | > Internet.
| > | > | Event Viewer shows the following failures. I rebooted the server a
| > | > number
| > | > of
| > | > | times, restarted all ISA services, attempted to start the ISA
| > | > ProxyService,
| > | > | but it fails, logging the errors below. I ran the connection
wizard
| > | > again,
| > | > | but no use. What else can I do to fix this?
| > | > | Thanks for the help,
| > | > | Attila
| > | > |
| > | > | Event Type: Error
| > | > | Event Source: Microsoft Firewall
| > | > | Event Category: None
| > | > | Event ID: 14060
| > | > | Date: 6/6/2006
| > | > | Time: 10:06:59 PM
| > | > | User: N/A
| > | > | Computer: Server1:
| > | > | Description:
| > | > | Cannot load an application filter Web Proxy Filter
| > | > | ({4CB7513E-220E-4C20-815A-B67BAA295FF4}). FilterInit failed with
| > code
| > | > | 0x80070005. To attempt to activate this application filter again,
| > stop
| > | > and
| > | > | restart the Firewall service.
| > | > |
| > | > | Event Type: Error
| > | > | Event Source: Microsoft ISA Server Web Proxy
| > | > | Event Category: None
| > | > | Event ID: 14127
| > | > | Date: 6/6/2006
| > | > | Time: 10:06:59 PM
| > | > | User: N/A
| > | > | Computer: Server1:
| > | > | The Web Proxy filter could not initialize (error code
| > | > 505.112.4.0.2165.594).
| > | > |
| > | > |
| > | > |
| > | > |
| > | >
| > |
| > |
| > |
| >
|
|
|

From: Attila-Csokai on 20 Jun 2006 21:36
Sorry for the late reply.

The problem was solved by Chris Puckett at SBS Texas. It was a missing
permission from the "My" key in the registry. If anybody is interested, I
can provide more details.

Attila
""Crina Li"" <v-crinal(a)online.microsoft.com> wrote in message
news:BuKxv$cjGHA.4828(a)TK2MSFTNGXA01.phx.gbl...
> Hi Attila,
>
> Thanks for your update.
>
> I am sorry for the delayed response due to weekend. Please understand that
> the newsgroups are staffed weekdays by Microsoft Support professionals to
> answer your systems and applications questions. Your understanding is
> greatly appreciated!
>
> Due to the complexity of this issue, we are unable to assist with this
> request in newsgroup. To save your time, you may still need to contact CSS
> for better support. I also recommend you to contact our BCPS support.
> Business-Critical Phone Support (BCPS) provides you with technical phone
> support at no charge during critical LAN outages or "business down"
> situations. This benefit is available 24 hours a day, 7 days a week to all
> Microsoft technology partners in the United States and Canada.
>
> This and other support options are available here:
> BCPS:
> https://partner.microsoft.com/US/technicalsupport/supportoverview/40010469
> Others: https://partner.microsoft.com/US/technicalsupport/supportoverview/
>
> If you are outside the United States, please visit our International
> Support page: http://support.microsoft.com/common/international.aspx.
>
> If you've not able to contact them, another suggestion would be to still
> contact Microsoft Product Support Services via telephone so that a
> dedicated Support Professional can assist with your request. Please be
> advised that contacting phone support will be a charged call.
>
> To obtain the phone numbers for specific technology request please take a
> look at the web site listed below.
> http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
>
> If you are outside the US please see http://support.microsoft.com for
> regional support phone numbers.
>
> Your understanding will be highly appreciated.
>
> Best regards,
>
> Crina Li (MSFT)
>
> Microsoft CSS Online Newsgroup Support
>
> Get Secure! - www.microsoft.com/security
>
> =====================================================
> This newsgroup only focuses on SBS technical issues. If you have issues
> regarding other Microsoft products, you'd better post in the corresponding
> newsgroups so that they can be resolved in an efficient and timely manner.
> You can locate the newsgroup here:
> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
>
> When opening a new thread via the web interface, we recommend you check
> the
> "Notify me of replies" box to receive e-mail notifications when there are
> any updates in your thread. When responding to posts via your newsreader,
> please "Reply to Group" so that others may learn and benefit from your
> issue.
>
> Microsoft engineers can only focus on one issue per thread. Although we
> provide other information for your reference, we recommend you post
> different incidents in different threads to keep the thread clean. In
> doing
> so, it will ensure your issues are resolved in a timely manner.
>
> For urgent issues, you may want to contact Microsoft CSS directly. Please
> check http://support.microsoft.com for regional support phone numbers.
>
> Any input or comments in this thread are highly appreciated.
>
> =====================================================
>
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
> --------------------
> | From: "Attila" <acsokai((@))gtnconsultig.com>
> | References: <#YENoidiGHA.3900(a)TK2MSFTNGP05.phx.gbl>
> <BEC#ZjsiGHA.1124(a)TK2MSFTNGXA01.phx.gbl>
> <#b3ut0viGHA.5036(a)TK2MSFTNGP04.phx.gbl>
> <ww9z9F6iGHA.5720(a)TK2MSFTNGXA01.phx.gbl>
> | Subject: Re: ISA Proxy Failure
> | Date: Fri, 9 Jun 2006 08:57:12 -0400
> | Lines: 342
> | X-Priority: 3
> | X-MSMail-Priority: Normal
> | X-Newsreader: Microsoft Outlook Express 6.00.2900.2869
> | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869
> | X-RFC2646: Format=Flowed; Original
> | Message-ID: <#2iy6Q8iGHA.3496(a)TK2MSFTNGP02.phx.gbl>
> | Newsgroups: microsoft.public.windows.server.sbs
> | NNTP-Posting-Host: dspacsokait60.mac.cc.cmu.edu 128.2.29.24
> | Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP02.phx.gbl
> | Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:274047
> | X-Tomcat-NG: microsoft.public.windows.server.sbs
> |
> | Ok, I tried your recommendations, even got the hotfix, which by the way
> told
> | me I do not have ISA 2004 installed. In reallity, what it was saying is
> that
> | it cannot install in ISA 2004 SP2, as when I removed SP2 for ISA, it
> | installed, but the problem did not get fixed.
> |
> | I called SBS Support, Business Critical, but were met with some of the
> most
> | incompetent techs I have ever talked to. After they wasted 4.5 hours, I
> | gave, I even reinstalled ISA 2004, but the ISA Service still won't
> start.
> No
> | offence to you, I hope I just got some bad techs. Im certain there are
> | competentn people on staff also. Time for a rebuild? It would certainly
> stop
> | wasting my time.
> |
> | Attila
> |
> |
> | ""Crina Li"" <v-crinal(a)online.microsoft.com> wrote in message
> | news:ww9z9F6iGHA.5720(a)TK2MSFTNGXA01.phx.gbl...
> | > Hi Attila,
> | >
> | > Thanks for your update.
> | >
> | > If this issue still occurs, let's do as following:.
> | >
> | > 1. Delete all the web publishing rules.
> | > 2. Locate the SBS companyWeb listener and SBS Web listener in the
> Network
> | > Objects (You can click Firewall Policy and then click Toolbox on the
> right
> | > pane.) in the ISA 2004 console.
> | > 3. Please export and delete the SBS CompanyWeb Listener.
> | > 4. Open the Properties page of SBS Web Listener and in the Preferences
> | > tab,
> | > please click to clear the check mark of Enable SSL. Click OK.
> | > 5. Apply the settings.
> | > 6. Try to start ISA service again and see if the issue will be
> reproduced.
> | >
> | > If we could start the ISA service, let's recreate new certificate in
> the
> | > CEICW wizard. You could create a new certificate with different name
> and
> | > see if things could be improved.
> | >
> | > I will look forward to hearing from you.
> | >
> | > Best regards,
> | >
> | > Crina Li (MSFT)
> | >
> | > Microsoft CSS Online Newsgroup Support
> | >
> | > Get Secure! - www.microsoft.com/security
> | >
> | > =====================================================
> | > This newsgroup only focuses on SBS technical issues. If you have
> issues
> | > regarding other Microsoft products, you'd better post in the
> corresponding
> | > newsgroups so that they can be resolved in an efficient and timely
> manner.
> | > You can locate the newsgroup here:
> | > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
> | >
> | > When opening a new thread via the web interface, we recommend you
> check
> | > the
> | > "Notify me of replies" box to receive e-mail notifications when there
> are
> | > any updates in your thread. When responding to posts via your
> newsreader,
> | > please "Reply to Group" so that others may learn and benefit from your
> | > issue.
> | >
> | > Microsoft engineers can only focus on one issue per thread. Although
> we
> | > provide other information for your reference, we recommend you post
> | > different incidents in different threads to keep the thread clean. In
> | > doing
> | > so, it will ensure your issues are resolved in a timely manner.
> | >
> | > For urgent issues, you may want to contact Microsoft CSS directly.
> Please
> | > check http://support.microsoft.com for regional support phone numbers.
> | >
> | > Any input or comments in this thread are highly appreciated.
> | >
> | > =====================================================
> | >
> | > This posting is provided "AS IS" with no warranties, and confers no
> | > rights.
> | > --------------------
> | > | From: "Attila" <acsokai((@))gtnconsultig.com>
> | > | References: <#YENoidiGHA.3900(a)TK2MSFTNGP05.phx.gbl>
> | > <BEC#ZjsiGHA.1124(a)TK2MSFTNGXA01.phx.gbl>
> | > | Subject: Re: ISA Proxy Failure
> | > | Date: Thu, 8 Jun 2006 09:12:20 -0400
> | > | Lines: 206
> | > | X-Priority: 3
> | > | X-MSMail-Priority: Normal
> | > | X-Newsreader: Microsoft Outlook Express 6.00.2900.2869
> | > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869
> | > | X-RFC2646: Format=Flowed; Original
> | > | Message-ID: <#b3ut0viGHA.5036(a)TK2MSFTNGP04.phx.gbl>
> | > | Newsgroups: microsoft.public.windows.server.sbs
> | > | NNTP-Posting-Host: dspacsokait60.mac.cc.cmu.edu 128.2.29.24
> | > | Path:
> TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP04.phx.gbl
> | > | Xref: TK2MSFTNGXA01.phx.gbl
> microsoft.public.windows.server.sbs:273766
> | > | X-Tomcat-NG: microsoft.public.windows.server.sbs
> | > |
> | > | Thank you so much for helping. As a SBS Partner, its important that
> I
> | > get
> | > | this fixed, as its my own server, and better for me to experience
> this
> | > then
> | > | my clients.
> | > |
> | > | Prior to your posting, I came across your first suggested fix
> already,
> | > | namely:
> | > | 837864 The Microsoft Firewall service does not start and event ID
> 7024
> | > is
> | > | logged in the system event log of the computer that is running ISA
> | > Server
> | > | 2004
> | > | http://support.microsoft.com/default.aspx?scid=kb;EN-US;837864
> | > |
> | > | BTW, I do have SP for ISA 2004 installed.
> | > | So here is what happened. It partially fixed the problem. In order
> to
> be
> | > | able to start the Webn Proxy Service, I had to disable all the Web
> | > | Publishing Rules. After the service started, I reenabled the four
> Web
> | > | Publishing Rules, but two of them compained that thought they
> started,
> | > they
> | > | could not be added to the database. Following this, I ran the CEICW,
> | > with
> | > | Firewall Enabled selected, but it failed on the Network
> Configuration,
> | > | however, was able to configure the rest. I ran the CEICW again,
> Firewall
> | > | Disabled, and it was able to configure all settings including
> Network
> | > | Configuration fine. However, OWA, RWA is still not possible from
> | > outside,
> | > | though luckily SMTP mail does come in.
> | > |
> | > | Next I deleted all four web publishing rules in ISA, ran the CEICW
> | > again,
> | > | but it repeated the same scenario above, if Firewall Enabled was
> | > selected
> | > | then Network Config failed, and if Firewall Disabled ws selected,
> the
> | > CEICW
> | > | completed fine.
> | > |
> | > | To note, in no case was I able to restart the ISA Proxy Service
> without
> | > | first disabling all four Web Publishing Rules, including after many
> | > reboots.
> | > |
> | > | Tonight, Im going to try your suggestion #2, 896495 The Firewall
> service
> | > may
> | > | not start in Internet Security and Acceleration (ISA) Server 2004
> after
> | > you
> | > | select a certificate for a, SSL listener
> | > | http://support.microsoft.com/default.aspx?scid=kb;EN-US;896495
> | > | and let you know. I just got the hotfix mentioned in the article and
> | > will
> | > | apply it tonight.
> | > |
> | > | Thanks, and I will update you tomorrow.
> | > |
> | > | Attila
> | > |
> | > |
> | > | ""Crina Li"" <v-crinal(a)online.microsoft.com> wrote in message
> | > | news:BEC%23ZjsiGHA.1124(a)TK2MSFTNGXA01.phx.gbl...
> | > | > Hi Attila,
> | > | >
> | > | > Thank you for posting in SBS newsgroup.
> | > | >
> | > | > From your description, I understand the issue to be: You can not
> | > connect
> | > | > to
> | > | > SBS and internet from client and got event 14060 and 14127 on
> server
> | > after
> | > | > a power failure. If I have misunderstood your concerns, please do
> not
> | > | > hesitate to let me know.
> | > | >
> | > | > Please check the following KB articles to see if they help:
> | > | >
> | > | > 837864 The Microsoft Firewall service does not start and event ID
> 7024
> | > is
> | > | > logged in the system event log of the computer that is running ISA
> | > Server
> | > | > 2004
> | > | > http://support.microsoft.com/default.aspx?scid=kb;EN-US;837864
> | > | >
> | > | > 896495 The Firewall service may not start in Internet Security and
> | > | > Acceleration (ISA) Server 2004 after you select a certificate for
> a,
> | > SSL
> | > | > listener
> | > | > http://support.microsoft.com/default.aspx?scid=kb;EN-US;896495
> | > | >
> | > | > If the issue still occurs, please try to rerun CEICW follow the
> below
> | > | > steps:
> | > | >
> | > | > 1. On the SBS 2003 Server open the Server Management console. Go
> to
> | > | > Standard Management\To Do List.
> | > | > 2. Click the "Connect to the Internet" link.
> | > | > 3. Choose not to change the connection type and click Next. On the
> | > | > Firewall
> | > | > page, select "Enable firewall" and click Next.
> | > | > 4. On the "Services Configuration" page, select all the items and
> then
> | > | > click Next.
> | > | > 5. On the "Web Services Configuration" page, make sure "Allow
> access
> | > to
> | > | > the
> | > | > entire Web site from the Internet" is selected. If you select
> "Allow
> | > | > access
> | > | > to only the following Web site services from the Internet", make
> sure
> | > the
> | > | > web sites you want to publish are selected. Click Next.
> | > | > 6. On the "Web Server Certificate" page, choose to create a new
> Web
> | > server
> | > | > certificate and then type the public FQDN of SBS.
> | > | > 7. Go through the remaining steps.
> | > | > 8. If you have a router or hardware firewall, configure it to
> forward
> | > | > inbound traffic on TCP port 80 and 443 to the SBS server's
> external
> | > | > address.
> | > | >
> | > | > 825763 How to configure Internet access in Windows Small Business
> | > Server
> | > | > 2003
> | > | > http://support.microsoft.com/?id=825763
> | > | >
> | > | > If it does not help, would you please help me collect the
> following
> | > | > information?
> | > | >
> | > | > 1. Have you installed ISA 2004 SP2?
> | > | > 2. Please disable SSL on the web listeners and test this issue.
> | > | >
> | > | > I appreciate your time and look forward to hearing from you.
> | > | >
> | > | > Best regards,
> | > | >
> | > | > Crina Li (MSFT)
> | > | >
> | > | > Microsoft CSS Online Newsgroup Support
> | > | >
> | > | > Get Secure! - www.microsoft.com/security
> | > | >
> | > | > =====================================================
> | > | > This newsgroup only focuses on SBS technical issues. If you have
> | > issues
> | > | > regarding other Microsoft products, you'd better post in the
> | > corresponding
> | > | > newsgroups so that they can be resolved in an efficient and timely
> | > manner.
> | > | > You can locate the newsgroup here:
> | > | > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
> | > | >
> | > | > When opening a new thread via the web interface, we recommend you
> | > check
> | > | > the
> | > | > "Notify me of replies" box to receive e-mail notifications when
> there
> | > are
> | > | > any updates in your thread. When responding to posts via your
> | > newsreader,
> | > | > please "Reply to Group" so that others may learn and benefit from
> your
> | > | > issue.
> | > | >
> | > | > Microsoft engineers can only focus on one issue per thread.
> Although
> | > we
> | > | > provide other information for your reference, we recommend you
> post
> | > | > different incidents in different threads to keep the thread clean.
> In
> | > | > doing
> | > | > so, it will ensure your issues are resolved in a timely manner.
> | > | >
> | > | > For urgent issues, you may want to contact Microsoft CSS directly.
> | > Please
> | > | > check http://support.microsoft.com for regional support phone
> numbers.
> | > | >
> | > | > Any input or comments in this thread are highly appreciated.
> | > | >
> | > | > =====================================================
> | > | >
> | > | > This posting is provided "AS IS" with no warranties, and confers
> no
> | > | > rights.
> | > | > --------------------
> | > | > | From: "ACsokai" <acsokai(a)andrew.cmu.edu>
> | > | > | Subject: ISA Proxy Failure
> | > | > | Date: Tue, 6 Jun 2006 22:18:23 -0400
> | > | > | Lines: 37
> | > | > | X-Priority: 3
> | > | > | X-MSMail-Priority: Normal
> | > | > | X-Newsreader: Microsoft Outlook Express 6.00.3790.2663
> | > | > | X-RFC2646: Format=Flowed; Original
> | > | > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2663
> | > | > | Message-ID: <#YENoidiGHA.3900(a)TK2MSFTNGP05.phx.gbl>
> | > | > | Newsgroups: microsoft.public.windows.server.sbs
> | > | > | NNTP-Posting-Host: pool-71-253-54-19.pitbpa.east.verizon.net
> | > | > 71.253.54.19
> | > | > | Path:
> | > TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP05.phx.gbl
> | > | > | Xref: TK2MSFTNGXA01.phx.gbl
> | > microsoft.public.windows.server.sbs:273397
> | > | > | X-Tomcat-NG: microsoft.public.windows.server.sbs
> | > | > |
>| > | > | I had a power failure on the server today, due to cable unplugged
> | > (small
> | > | > | server, single power supply).
> | > | > |
> | > | > | Upon startup, we relized that we cannot reach the server or the
> | > | > Internet.
> | > | > | Event Viewer shows the following failures. I rebooted the server
> a
> | > | > number
> | > | > of
> | > | > | times, restarted all ISA services, attempted to start the ISA
> | > | > ProxyService,
> | > | > | but it fails, logging the errors below. I ran the connection
> wizard
> | > | > again,
> | > | > | but no use. What else can I do to fix this?
> | > | > | Thanks for the help,
> | > | > | Attila
> | > | > |
> | > | > | Event Type: Error
> | > | > | Event Source: Microsoft Firewall
> | > | > | Event Category: None
> | > | > | Event ID: 14060
> | > | > | Date: 6/6/2006
> | > | > | Time: 10:06:59 PM
> | > | > | User: N/A
> | > | > | Computer: Server1:
> | > | > | Description:
> | > | > | Cannot load an application filter Web Proxy Filter
> | > | > | ({4CB7513E-220E-4C20-815A-B67BAA295FF4}). FilterInit failed with
> | > code
> | > | > | 0x80070005. To attempt to activate this application filter
> again,
> | > stop
> | > | > and
> | > | > | restart the Firewall service.
> | > | > |
> | > | > | Event Type: Error
> | > | > | Event Source: Microsoft ISA Server Web Proxy
> | > | > | Event Category: None
> | > | > | Event ID: 14127
> | > | > | Date: 6/6/2006
> | > | > | Time: 10:06:59 PM
> | > | > | User: N/A
> | > | > | Computer: Server1:
> | > | > | The Web Proxy filter could not initialize (error code
> | > | > 505.112.4.0.2165.594).
> | > | > |
> | > | > |
> | > | > |
> | > | > |
> | > | >
> | > |
> | > |
> | > |
> | >
> |
> |
> |
>


First  |  Prev  | 
Pages: 1 2
Prev: Backup fails with Volume Shadow Copy Error
Next: Error 170: The requested resource is in use