Prev: Philips 27PT643 (L01.1UAC chassis) constantly shorting HOT
Next: TDS544A Data Acquisition Board failure
From: elbesales on 21 Sep 2006 13:32
Are the inverter fuses quick action or slo blo?

Thanks,
--E

Andy Cuffe wrote:
> Chances are, the inverter is the problem since it usually shares its
> power supplies with the LCD. Look for any fuses on the inverter
> board. They will probably be small surface mount components near the
> 12 pin connector. That orange component to the left of the big green
> capacitor could be a fuse. There may be some fuses on the bottom of
> the board too. If you find any open fuses, there's a good chance that
> a new fuse will fix it. About 3/4 of the inverters I see with blown
> fuses have no other problems. If a new fuse doesn't fix it, you will
> probably need to replace the inverter board. Schematics are rarely
> available and parts are impossible to find.
> Andy Cuffe
>
> acuffe(a)gmail.com

First  |  Prev  | 
Pages: 1 2 3 4
Prev: Philips 27PT643 (L01.1UAC chassis) constantly shorting HOT
Next: TDS544A Data Acquisition Board failure