Linux Networking
in [Network]
|
Wait for infinity .. What is at fault, the browser or the proxy? I am using tinyproxy for website filtering, and the iceape browser (which is a derivative of mozilla seamonkey), on my Linux based system. I have blocked google-analytics.com via the proxy server block list. If I point the browser at http://ssl.google-analytics.com/ I get an error as follows: Cache Error! The... 14 Apr 2010 18:55
configuring addresses Hi people! I habe in a linux machine 2 NIC . NIC 1 -> 192.168.1.2 broadcast 192.168.1.255 netmask 255.255.255.0" attached to NIC1 is one DSL Modem. Question 1: How will I have to configure nic 2 that both networks don't bite each other. Question 2: How will the clients behind NIC2 (connected to a switc... 9 Apr 2010 08:52
Cat 5E order of wires? I have just seen two "howto" descriptions of wiring for Cat5E, and I noticed that they were identical (great!), _except_ that some color/color-white pairs were reversed, for instance green instead of green-white, and green-white instead of green. I _think_ that this is harmless, because the colour/colour-white ar... 8 Apr 2010 10:55
bind9.6 over socks proxy Hi, I'm creating a test system and will analyse the packages. I have installed a bind9.6 that get's the information from the root zones. I don't use at this time forwarders. Can I send all packages from bind over a socks proxy? Only the request that runs out of the box (to the root servers and other servers) ... 10 Apr 2010 09:05
CAT6 CAT5e question Can Cat5e RJ45 connector crimper be used for Cat 6 connector because I heard cat 6 connector is different from cat 5e connector ... 9 Apr 2010 07:47
re-detecting network card after installation? (Debian, lenny) Hello all! Can anyone advise on the procedure for adding new hardware devices on a Debian (lenny) system? Specifically, I need to know how to get Debian to detect and set up a different network card from the one that was present when Debian was installed. It's not picking up the change of hardware automat... 11 Apr 2010 19:01
Prism54 Chispset USB Can't set it to Master Mode According to ths web site http://wireless.kernel.org/en/users/Drivers/p54 My USB Wireless device with prism54 chipset should work with AP Mode [CODE]root(a)fit-desktop:/home/fit# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 no wireless extensions. pan0 no wi... 3 Apr 2010 11:30
TCP packet size is much smaller than expected Hello, I have a simple TCP client-server application, which I run between two desktops on the same LAN. The MTU on the NICS on both server and client are 1500 bytes. The code for the client TCP socket is at the bottom of this message. I send a large buffer, of 2010 bytes (I tried sending by calling "write()" as... 5 Apr 2010 18:20
Packet forwarding for Battle.net port 4000 6112-6119 This is current setting internet -- linux -- AP -- host 10.1.1.52 (which i'm configuring) iptables -t nat -A POSTROUTING -s 10.1.1.0/24 -o eth0 -j MASQUERADE iptables -A FORWARD -s 10.1.1.0/24 -o eth0 -j ACCEPT iptables -A FORWARD -d 10.1.1.0/24 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT op... 2 Apr 2010 21:29
openning port for battle.net with iptables How do I open port for battle.net with iptables. I searched the internet and can't find the answer need to open these port 4000 TCP,UDP in and out port 6113-6119 TCP,UDP in and out ... 3 Apr 2010 11:30 |