No more VPN acces on SBS 2003
|
From: Andy Desborough on 25 May 2010 17:00 I get the same 800 error when trying to VPN from a client inside the LAN (I can get to with Logmein) Sorry, contrary to what I said earlier I CAN RWW internally/remotely but when I login to RWW as administrator I get no 'connect to server desktop' in the list of options that are normally there. I can see the mapped drives, shares, email etc. I guess I'll have to dig around in the event log and run the wizards when I'm down there tomorrow to investigate a bit more. Thanks for your help, Russ. Regards, Andy. "Russ SBITS.Biz [SBS-MVP]" wrote: > Ok you really need 1 issue at a time. > > Can you VPN from inside the LAN > (I know that sounds odd but if you can VPN inside the LAN) > Then Port 1723 and or GRE is blocked. > > On the RWW What is the issue/error > Russ > > -- > Russell Grover - SBITS.Biz [SBS-MVP] > MCP, MCPS, MCNPS, SBSC > Small Business Server/Computer Support - www.SBITS.Biz > BPOS - Microsoft Online Services - www.Microsoft-Online-Services.com > > > "Andy Desborough" <AndyDesborough(a)discussions.microsoft.com> wrote in > message news:38C9459B-CC72-4F89-BFA0-86EF71837C19(a)microsoft.com... > > Thanks for the reply (and sorry to hijack your thread Tommy) > > > > I get an error 800 from my connection, I'm unsure what the users get. I'm > > unable to do anything with the server from here until I can get down there > > tomorrow unfortunately. It's odd circumstances as everything's been fine > > for > > a long time until yesterday which makes me wonder about windowsupdate. > > > > Users in the office seem unaffected, file shares/print is working, > > Exchange > > send/receive is working and I can access mailboxes via OWA although RWW no > > longer works either. > > > > Regards, > > Andy > > > > "Russ SBITS.Biz [SBS-MVP]" wrote: > > > >> To Both > >> What is the error you are getting on the VPN Connection? 800? > >> And have you re run the CEICW and made sure VPN is Enabled. > >> Also Make sure the affected Users are "Remote" Users > >> > >> Russ > >> > >> -- > >> Russell Grover - SBITS.Biz [SBS-MVP] > >> MCP, MCPS, MCNPS, SBSC > >> Small Business Server/Computer Support - www.SBITS.Biz > >> BPOS - Microsoft Online Services - www.Microsoft-Online-Services.com > >> > >> > >> "Andy Desborough" <AndyDesborough(a)discussions.microsoft.com> wrote in > >> message news:889AAE50-0008-439F-AF5F-7300BBD06F29(a)microsoft.com... > >> > I've had the same problem happen in the last 2 days, VPN has stopped > >> > working, > >> > I can't access the server via RDP nor Logmein either. I can access > >> > workstations ok, so the path in is working ok. The server also runs > >> > very > >> > very > >> > slow when trying to reboot. Visiting site tomorrow to check the logs > >> > but > >> > no > >> > idea why it just started happening? > >> > > >> > "Tommy Turbide" wrote: > >> > > >> >> Hi all, > >> >> > >> >> I've been using SBS 2003 for remote access (VPN) connexion since a > >> >> while. Working fine until I've done some windows update (on the end > >> >> of > >> >> april > >> >> 2010). Since then, I can't connect to this server. I've resetted the > >> >> services, disabled/enabled it via server managment, via the Routing > >> >> and > >> >> Remote Access manager and still nothing. Only time I got it working > >> >> is > >> >> when > >> >> I've removed the updates. It worked after the first reboot so I've > >> >> reinstalled the update to double check and it made it stoped. Now > >> >> I've > >> >> removed them again but it's still not working. > >> >> > >> >> > >> >> > >> >> Updates installed where thoses: > >> >> > >> >> KB978338 KB979683 KB979309 KB980182 KB976323 KB978601 KB980232 > >> >> KB977816 > >> >> KB981332 > >> >> > >> >> I can't telnet on port 1723 on this server at all and other opened > >> >> port > >> >> are > >> >> working fine. > >> >> > >> >> -- > >> >> Groupe Isolofoam > >> >> www.isolofoam.com > >>
From: Russ SBITS.Biz [SBS-MVP] on 25 May 2010 17:35 95% of my clients I've never visited onsite. Just RDC to the server and make your fixes :) Russ -- Russell Grover - SBITS.Biz [SBS-MVP] MCP, MCPS, MCNPS, SBSC Small Business Server/Computer Support - www.SBITS.Biz BPOS - Microsoft Online Services - www.Microsoft-Online-Services.com "Andy Desborough" <AndyDesborough(a)discussions.microsoft.com> wrote in message news:F674D757-2F99-4E2D-9E86-CE86925B9BF9(a)microsoft.com... > I get the same 800 error when trying to VPN from a client inside the LAN > (I > can get to with Logmein) > > Sorry, contrary to what I said earlier I CAN RWW internally/remotely but > when I login to RWW as administrator I get no 'connect to server desktop' > in > the list of options that are normally there. I can see the mapped drives, > shares, email etc. I guess I'll have to dig around in the event log and > run > the wizards when I'm down there tomorrow to investigate a bit more. > > Thanks for your help, Russ. > > Regards, > Andy. > > "Russ SBITS.Biz [SBS-MVP]" wrote: > >> Ok you really need 1 issue at a time. >> >> Can you VPN from inside the LAN >> (I know that sounds odd but if you can VPN inside the LAN) >> Then Port 1723 and or GRE is blocked. >> >> On the RWW What is the issue/error >> Russ >> >> -- >> Russell Grover - SBITS.Biz [SBS-MVP] >> MCP, MCPS, MCNPS, SBSC >> Small Business Server/Computer Support - www.SBITS.Biz >> BPOS - Microsoft Online Services - www.Microsoft-Online-Services.com >> >> >> "Andy Desborough" <AndyDesborough(a)discussions.microsoft.com> wrote in >> message news:38C9459B-CC72-4F89-BFA0-86EF71837C19(a)microsoft.com... >> > Thanks for the reply (and sorry to hijack your thread Tommy) >> > >> > I get an error 800 from my connection, I'm unsure what the users get. >> > I'm >> > unable to do anything with the server from here until I can get down >> > there >> > tomorrow unfortunately. It's odd circumstances as everything's been >> > fine >> > for >> > a long time until yesterday which makes me wonder about windowsupdate. >> > >> > Users in the office seem unaffected, file shares/print is working, >> > Exchange >> > send/receive is working and I can access mailboxes via OWA although RWW >> > no >> > longer works either. >> > >> > Regards, >> > Andy >> > >> > "Russ SBITS.Biz [SBS-MVP]" wrote: >> > >> >> To Both >> >> What is the error you are getting on the VPN Connection? 800? >> >> And have you re run the CEICW and made sure VPN is Enabled. >> >> Also Make sure the affected Users are "Remote" Users >> >> >> >> Russ >> >> >> >> -- >> >> Russell Grover - SBITS.Biz [SBS-MVP] >> >> MCP, MCPS, MCNPS, SBSC >> >> Small Business Server/Computer Support - www.SBITS.Biz >> >> BPOS - Microsoft Online Services - www.Microsoft-Online-Services.com >> >> >> >> >> >> "Andy Desborough" <AndyDesborough(a)discussions.microsoft.com> wrote in >> >> message news:889AAE50-0008-439F-AF5F-7300BBD06F29(a)microsoft.com... >> >> > I've had the same problem happen in the last 2 days, VPN has stopped >> >> > working, >> >> > I can't access the server via RDP nor Logmein either. I can access >> >> > workstations ok, so the path in is working ok. The server also runs >> >> > very >> >> > very >> >> > slow when trying to reboot. Visiting site tomorrow to check the >> >> > logs >> >> > but >> >> > no >> >> > idea why it just started happening? >> >> > >> >> > "Tommy Turbide" wrote: >> >> > >> >> >> Hi all, >> >> >> >> >> >> I've been using SBS 2003 for remote access (VPN) connexion >> >> >> since a >> >> >> while. Working fine until I've done some windows update (on the >> >> >> end >> >> >> of >> >> >> april >> >> >> 2010). Since then, I can't connect to this server. I've resetted >> >> >> the >> >> >> services, disabled/enabled it via server managment, via the Routing >> >> >> and >> >> >> Remote Access manager and still nothing. Only time I got it >> >> >> working >> >> >> is >> >> >> when >> >> >> I've removed the updates. It worked after the first reboot so I've >> >> >> reinstalled the update to double check and it made it stoped. Now >> >> >> I've >> >> >> removed them again but it's still not working. >> >> >> >> >> >> >> >> >> >> >> >> Updates installed where thoses: >> >> >> >> >> >> KB978338 KB979683 KB979309 KB980182 KB976323 KB978601 KB980232 >> >> >> KB977816 >> >> >> KB981332 >> >> >> >> >> >> I can't telnet on port 1723 on this server at all and other opened >> >> >> port >> >> >> are >> >> >> working fine. >> >> >> >> >> >> -- >> >> >> Groupe Isolofoam >> >> >> www.isolofoam.com >> >>
From: Andy Desborough on 25 May 2010 17:59 RDC doesn't connect externally or internally either!! :) Will see what happens tomorrow. Regards, Andy. "Russ SBITS.Biz [SBS-MVP]" wrote: > 95% of my clients I've never visited onsite. > Just RDC to the server and make your fixes :) > Russ > > -- > Russell Grover - SBITS.Biz [SBS-MVP] > MCP, MCPS, MCNPS, SBSC > Small Business Server/Computer Support - www.SBITS.Biz > BPOS - Microsoft Online Services - www.Microsoft-Online-Services.com > > > "Andy Desborough" <AndyDesborough(a)discussions.microsoft.com> wrote in > message news:F674D757-2F99-4E2D-9E86-CE86925B9BF9(a)microsoft.com... > > I get the same 800 error when trying to VPN from a client inside the LAN > > (I > > can get to with Logmein) > > > > Sorry, contrary to what I said earlier I CAN RWW internally/remotely but > > when I login to RWW as administrator I get no 'connect to server desktop' > > in > > the list of options that are normally there. I can see the mapped drives, > > shares, email etc. I guess I'll have to dig around in the event log and > > run > > the wizards when I'm down there tomorrow to investigate a bit more. > > > > Thanks for your help, Russ. > > > > Regards, > > Andy. > > > > "Russ SBITS.Biz [SBS-MVP]" wrote: > > > >> Ok you really need 1 issue at a time. > >> > >> Can you VPN from inside the LAN > >> (I know that sounds odd but if you can VPN inside the LAN) > >> Then Port 1723 and or GRE is blocked. > >> > >> On the RWW What is the issue/error > >> Russ > >> > >> -- > >> Russell Grover - SBITS.Biz [SBS-MVP] > >> MCP, MCPS, MCNPS, SBSC > >> Small Business Server/Computer Support - www.SBITS.Biz > >> BPOS - Microsoft Online Services - www.Microsoft-Online-Services.com > >> > >> > >> "Andy Desborough" <AndyDesborough(a)discussions.microsoft.com> wrote in > >> message news:38C9459B-CC72-4F89-BFA0-86EF71837C19(a)microsoft.com... > >> > Thanks for the reply (and sorry to hijack your thread Tommy) > >> > > >> > I get an error 800 from my connection, I'm unsure what the users get. > >> > I'm > >> > unable to do anything with the server from here until I can get down > >> > there > >> > tomorrow unfortunately. It's odd circumstances as everything's been > >> > fine > >> > for > >> > a long time until yesterday which makes me wonder about windowsupdate. > >> > > >> > Users in the office seem unaffected, file shares/print is working, > >> > Exchange > >> > send/receive is working and I can access mailboxes via OWA although RWW > >> > no > >> > longer works either. > >> > > >> > Regards, > >> > Andy > >> > > >> > "Russ SBITS.Biz [SBS-MVP]" wrote: > >> > > >> >> To Both > >> >> What is the error you are getting on the VPN Connection? 800? > >> >> And have you re run the CEICW and made sure VPN is Enabled. > >> >> Also Make sure the affected Users are "Remote" Users > >> >> > >> >> Russ > >> >> > >> >> -- > >> >> Russell Grover - SBITS.Biz [SBS-MVP] > >> >> MCP, MCPS, MCNPS, SBSC > >> >> Small Business Server/Computer Support - www.SBITS.Biz > >> >> BPOS - Microsoft Online Services - www.Microsoft-Online-Services.com > >> >> > >> >> > >> >> "Andy Desborough" <AndyDesborough(a)discussions.microsoft.com> wrote in > >> >> message news:889AAE50-0008-439F-AF5F-7300BBD06F29(a)microsoft.com... > >> >> > I've had the same problem happen in the last 2 days, VPN has stopped > >> >> > working, > >> >> > I can't access the server via RDP nor Logmein either. I can access > >> >> > workstations ok, so the path in is working ok. The server also runs > >> >> > very > >> >> > very > >> >> > slow when trying to reboot. Visiting site tomorrow to check the > >> >> > logs > >> >> > but > >> >> > no > >> >> > idea why it just started happening? > >> >> > > >> >> > "Tommy Turbide" wrote: > >> >> > > >> >> >> Hi all, > >> >> >> > >> >> >> I've been using SBS 2003 for remote access (VPN) connexion > >> >> >> since a > >> >> >> while. Working fine until I've done some windows update (on the > >> >> >> end > >> >> >> of > >> >> >> april > >> >> >> 2010). Since then, I can't connect to this server. I've resetted > >> >> >> the > >> >> >> services, disabled/enabled it via server managment, via the Routing > >> >> >> and > >> >> >> Remote Access manager and still nothing. Only time I got it > >> >> >> working > >> >> >> is > >> >> >> when > >> >> >> I've removed the updates. It worked after the first reboot so I've > >> >> >> reinstalled the update to double check and it made it stoped. Now > >> >> >> I've > >> >> >> removed them again but it's still not working. > >> >> >> > >> >> >> > >> >> >> > >> >> >> Updates installed where thoses: > >> >> >> > >> >> >> KB978338 KB979683 KB979309 KB980182 KB976323 KB978601 KB980232 > >> >> >> KB977816 > >> >> >> KB981332 > >> >> >> > >> >> >> I can't telnet on port 1723 on this server at all and other opened > >> >> >> port > >> >> >> are > >> >> >> working fine. > >> >> >> > >> >> >> -- > >> >> >> Groupe Isolofoam > >> >> >> www.isolofoam.com > >> >>
From: Larry Struckmeyer[SBS-MVP] on 25 May 2010 20:40 Just a guess, and it may not work, but it can't hurt. If you can RWW to the RWW landing page and logon to RWW as Administrator, can you then logon to anything inside the LAN? From the TS or a desktop, issue the following command: shutdown /t 2 /m \\sbsserver /r That should shutdown and restart the SBS. Restarts have been known to repair many issues in SBS. - Larry Please post the resolution to your issue so others may benefit - Get Your SBS Health Check at www.sbsbpa.com > RDC doesn't connect externally or internally either!! :) > > Will see what happens tomorrow. > > Regards, > Andy. > "Russ SBITS.Biz [SBS-MVP]" wrote: > >> 95% of my clients I've never visited onsite. >> Just RDC to the server and make your fixes :) >> Russ >> -- >> Russell Grover - SBITS.Biz [SBS-MVP] >> MCP, MCPS, MCNPS, SBSC >> Small Business Server/Computer Support - www.SBITS.Biz >> BPOS - Microsoft Online Services - www.Microsoft-Online-Services.com >> "Andy Desborough" <AndyDesborough(a)discussions.microsoft.com> wrote in >> message news:F674D757-2F99-4E2D-9E86-CE86925B9BF9(a)microsoft.com... >> >>> I get the same 800 error when trying to VPN from a client inside the >>> LAN >>> (I >>> can get to with Logmein) >>> Sorry, contrary to what I said earlier I CAN RWW internally/remotely >>> but >>> when I login to RWW as administrator I get no 'connect to server >>> desktop' >>> in >>> the list of options that are normally there. I can see the mapped >>> drives, >>> shares, email etc. I guess I'll have to dig around in the event log >>> and >>> run >>> the wizards when I'm down there tomorrow to investigate a bit more. >>> Thanks for your help, Russ. >>> >>> Regards, >>> Andy. >>> "Russ SBITS.Biz [SBS-MVP]" wrote: >>> >>>> Ok you really need 1 issue at a time. >>>> >>>> Can you VPN from inside the LAN >>>> (I know that sounds odd but if you can VPN inside the LAN) >>>> Then Port 1723 and or GRE is blocked. >>>> On the RWW What is the issue/error >>>> Russ >>>> -- >>>> Russell Grover - SBITS.Biz [SBS-MVP] >>>> MCP, MCPS, MCNPS, SBSC >>>> Small Business Server/Computer Support - www.SBITS.Biz >>>> BPOS - Microsoft Online Services - >>>> www.Microsoft-Online-Services.com >>>> "Andy Desborough" <AndyDesborough(a)discussions.microsoft.com> wrote >>>> in message >>>> news:38C9459B-CC72-4F89-BFA0-86EF71837C19(a)microsoft.com... >>>> >>>>> Thanks for the reply (and sorry to hijack your thread Tommy) >>>>> >>>>> I get an error 800 from my connection, I'm unsure what the users >>>>> get. >>>>> I'm >>>>> unable to do anything with the server from here until I can get >>>>> down >>>>> there >>>>> tomorrow unfortunately. It's odd circumstances as everything's >>>>> been >>>>> fine >>>>> for >>>>> a long time until yesterday which makes me wonder about >>>>> windowsupdate. >>>>> Users in the office seem unaffected, file shares/print is working, >>>>> Exchange >>>>> send/receive is working and I can access mailboxes via OWA >>>>> although RWW >>>>> no >>>>> longer works either. >>>>> Regards, >>>>> Andy >>>>> "Russ SBITS.Biz [SBS-MVP]" wrote: >>>>> >>>>>> To Both >>>>>> What is the error you are getting on the VPN Connection? 800? >>>>>> And have you re run the CEICW and made sure VPN is Enabled. >>>>>> Also Make sure the affected Users are "Remote" Users >>>>>> Russ >>>>>> >>>>>> -- >>>>>> Russell Grover - SBITS.Biz [SBS-MVP] >>>>>> MCP, MCPS, MCNPS, SBSC >>>>>> Small Business Server/Computer Support - www.SBITS.Biz >>>>>> BPOS - Microsoft Online Services - >>>>>> www.Microsoft-Online-Services.com >>>>>> "Andy Desborough" <AndyDesborough(a)discussions.microsoft.com> >>>>>> wrote in message >>>>>> news:889AAE50-0008-439F-AF5F-7300BBD06F29(a)microsoft.com... >>>>>> >>>>>>> I've had the same problem happen in the last 2 days, VPN has >>>>>>> stopped >>>>>>> working, >>>>>>> I can't access the server via RDP nor Logmein either. I can >>>>>>> access >>>>>>> workstations ok, so the path in is working ok. The server also >>>>>>> runs >>>>>>> very >>>>>>> very >>>>>>> slow when trying to reboot. Visiting site tomorrow to check the >>>>>>> logs >>>>>>> but >>>>>>> no >>>>>>> idea why it just started happening? >>>>>>> "Tommy Turbide" wrote: >>>>>>> >>>>>>>> Hi all, >>>>>>>> >>>>>>>> I've been using SBS 2003 for remote access (VPN) connexion >>>>>>>> since a >>>>>>>> while. Working fine until I've done some windows update (on >>>>>>>> the >>>>>>>> end >>>>>>>> of >>>>>>>> april >>>>>>>> 2010). Since then, I can't connect to this server. I've >>>>>>>> resetted >>>>>>>> the >>>>>>>> services, disabled/enabled it via server managment, via the >>>>>>>> Routing >>>>>>>> and >>>>>>>> Remote Access manager and still nothing. Only time I got it >>>>>>>> working >>>>>>>> is >>>>>>>> when >>>>>>>> I've removed the updates. It worked after the first reboot so >>>>>>>> I've >>>>>>>> reinstalled the update to double check and it made it stoped. >>>>>>>> Now >>>>>>>> I've >>>>>>>> removed them again but it's still not working. >>>>>>>> Updates installed where thoses: >>>>>>>> >>>>>>>> KB978338 KB979683 KB979309 KB980182 KB976323 KB978601 KB980232 >>>>>>>> KB977816 >>>>>>>> KB981332 >>>>>>>> I can't telnet on port 1723 on this server at all and other >>>>>>>> opened >>>>>>>> port >>>>>>>> are >>>>>>>> working fine. >>>>>>>> -- >>>>>>>> Groupe Isolofoam >>>>>>>> www.isolofoam.com
From: Andy Desborough on 27 May 2010 16:17 Problem solved :) I found today that when buttoning the server it took an awful long time to logon at 'applying computer settings'. Eventually the desktop came up and it appeared a bit sluggish, CEICW wizard hang after trying to run etc. The server couldn't access the internet via a browser but I could ping sites and Exchange was working fine. When I Googled the applying computer settings bit I found several references to a problem with APC Powerchute and Java updates and although they were from 2005 onwards sure enough one of the APC services was stuck on 'starting' and the Performance Logs and alerts service was hung on 'stopping'. I killed the APC services in Task Manager, uninstalled the Powerchite software as suggested and the server was back to normal; the AV software updated (wouldn't previously) and I could then RDP/VPN/Logmein to it externally. Various posts suggested upgrading APC to V7 but the server was already running V7 so need to do a bit more research on that, or as the battery's almost defunct I may replace with a different manufacturers. Very odd behaviour but got to the bottom of it, thanks for your help :) Andy. "Tommy Turbide" wrote: > Telnet on port 1723 is going nowhere on this SBS. Reboot was done on last > removal of updates, still nothing gets trough. > > As of now, I've transfered VPN to another Windows 2003 server (not SBS) with > manual setup (Via Routing/Remote access) and it works flawlessly since. That > rules out any network/gateway issue out of the SBS box. > > Also, wizard was ran, RRA was ran manually, both where disabled and reran > but still nothing. > > When I've installed the update the first time and got the issue, I've > removed all updates from this date (as stated in first post) and it worked > back. I've reinstalled the update a second time to confirm that they where > causing this issue and can't get it to work since. > > Thanks > -- > Groupe Isolofoam > www.isolofoam.com > > > "Larry Struckmeyer[SBS-MVP]" wrote: > > > Just a guess, and it may not work, but it can't hurt. > > > > If you can RWW to the RWW landing page and logon to RWW as Administrator, > > can you then logon to anything inside the LAN? > > > > From the TS or a desktop, issue the following command: > > > > shutdown /t 2 /m \\sbsserver /r > > > > That should shutdown and restart the SBS. Restarts have been known to repair > > many issues in SBS. > > > > - > > Larry > > Please post the resolution to your > > issue so others may benefit > > - > > Get Your SBS Health Check at > > www.sbsbpa.com > > > > > > > RDC doesn't connect externally or internally either!! :) > > > > > > Will see what happens tomorrow. > > > > > > Regards, > > > Andy. > > > "Russ SBITS.Biz [SBS-MVP]" wrote: > > > > > >> 95% of my clients I've never visited onsite. > > >> Just RDC to the server and make your fixes :) > > >> Russ > > >> -- > > >> Russell Grover - SBITS.Biz [SBS-MVP] > > >> MCP, MCPS, MCNPS, SBSC > > >> Small Business Server/Computer Support - www.SBITS.Biz > > >> BPOS - Microsoft Online Services - www.Microsoft-Online-Services.com > > >> "Andy Desborough" <AndyDesborough(a)discussions.microsoft.com> wrote in > > >> message news:F674D757-2F99-4E2D-9E86-CE86925B9BF9(a)microsoft.com... > > >> > > >>> I get the same 800 error when trying to VPN from a client inside the > > >>> LAN > > >>> (I > > >>> can get to with Logmein) > > >>> Sorry, contrary to what I said earlier I CAN RWW internally/remotely > > >>> but > > >>> when I login to RWW as administrator I get no 'connect to server > > >>> desktop' > > >>> in > > >>> the list of options that are normally there. I can see the mapped > > >>> drives, > > >>> shares, email etc. I guess I'll have to dig around in the event log > > >>> and > > >>> run > > >>> the wizards when I'm down there tomorrow to investigate a bit more. > > >>> Thanks for your help, Russ. > > >>> > > >>> Regards, > > >>> Andy. > > >>> "Russ SBITS.Biz [SBS-MVP]" wrote: > > >>> > > >>>> Ok you really need 1 issue at a time. > > >>>> > > >>>> Can you VPN from inside the LAN > > >>>> (I know that sounds odd but if you can VPN inside the LAN) > > >>>> Then Port 1723 and or GRE is blocked. > > >>>> On the RWW What is the issue/error > > >>>> Russ > > >>>> -- > > >>>> Russell Grover - SBITS.Biz [SBS-MVP] > > >>>> MCP, MCPS, MCNPS, SBSC > > >>>> Small Business Server/Computer Support - www.SBITS.Biz > > >>>> BPOS - Microsoft Online Services - > > >>>> www.Microsoft-Online-Services.com > > >>>> "Andy Desborough" <AndyDesborough(a)discussions.microsoft.com> wrote > > >>>> in message > > >>>> news:38C9459B-CC72-4F89-BFA0-86EF71837C19(a)microsoft.com... > > >>>> > > >>>>> Thanks for the reply (and sorry to hijack your thread Tommy) > > >>>>> > > >>>>> I get an error 800 from my connection, I'm unsure what the users > > >>>>> get. > > >>>>> I'm > > >>>>> unable to do anything with the server from here until I can get > > >>>>> down > > >>>>> there > > >>>>> tomorrow unfortunately. It's odd circumstances as everything's > > >>>>> been > > >>>>> fine > > >>>>> for > > >>>>> a long time until yesterday which makes me wonder about > > >>>>> windowsupdate. > > >>>>> Users in the office seem unaffected, file shares/print is working, > > >>>>> Exchange > > >>>>> send/receive is working and I can access mailboxes via OWA > > >>>>> although RWW > > >>>>> no > > >>>>> longer works either. > > >>>>> Regards, > > >>>>> Andy > > >>>>> "Russ SBITS.Biz [SBS-MVP]" wrote: > > >>>>> > > >>>>>> To Both > > >>>>>> What is the error you are getting on the VPN Connection? 800? > > >>>>>> And have you re run the CEICW and made sure VPN is Enabled. > > >>>>>> Also Make sure the affected Users are "Remote" Users > > >>>>>> Russ > > >>>>>> > > >>>>>> -- > > >>>>>> Russell Grover - SBITS.Biz [SBS-MVP] > > >>>>>> MCP, MCPS, MCNPS, SBSC > > >>>>>> Small Business Server/Computer Support - www.SBITS.Biz > > >>>>>> BPOS - Microsoft Online Services - > > >>>>>> www.Microsoft-Online-Services.com > > >>>>>> "Andy Desborough" <AndyDesborough(a)discussions.microsoft.com> > > >>>>>> wrote in message > > >>>>>> news:889AAE50-0008-439F-AF5F-7300BBD06F29(a)microsoft.com... > > >>>>>> > > >>>>>>> I've had the same problem happen in the last 2 days, VPN has > > >>>>>>> stopped > > >>>>>>> working, > > >>>>>>> I can't access the server via RDP nor Logmein either. I can > > >>>>>>> access > > >>>>>>> workstations ok, so the path in is working ok. The server also > > >>>>>>> runs > > >>>>>>> very > > >>>>>>> very > > >>>>>>> slow when trying to reboot. Visiting site tomorrow to check the > > >>>>>>> logs > > >>>>>>> but > > >>>>>>> no > > >>>>>>> idea why it just started happening? > > >>>>>>> "Tommy Turbide" wrote: > > >>>>>>> > > >>>>>>>> Hi all, > > >>>>>>>> > > >>>>>>>> I've been using SBS 2003 for remote access (VPN) connexion > > >>>>>>>> since a > > >>>>>>>> while. Working fine until I've done some windows update (on > > >>>>>>>> the > > >>>>>>>> end > > >>>>>>>> of > > >>>>>>>> april > > >>>>>>>> 2010). Since then, I can't connect to this server. I've > > >>>>>>>> resetted > > >>>>>>>> the > > >>>>>>>> services, disabled/enabled it via server managment, via the > > >>>>>>>> Routing > > >>>>>>>> and > > >>>>>>>> Remote Access manager and still nothing. Only time I got it > > >>>>>>>> working > > >>>>>>>> is > > >>>>>>>> when > > >>>>>>>> I've removed the updates. It worked after the first reboot so > > >>>>>>>> I've > > >>>>>>>> reinstalled the update to double check and it made it stoped. > > >>>>>>>> Now > > >>>>>>>> I've > > >>>>>>>> removed them again but it's still not working. > > >>>>>>>> Updates installed where thoses: > > >>>>>>>> > > >>>>>>>> KB978338 KB979683 KB979309 KB980182 KB976323 KB978601 KB980232 > > >>>>>>>> KB977816 > > >>>>>>>> KB981332 > > >>>>>>>> I can't telnet on port 1723 on this server at all and other > > >>>>>>>> opened > > >>>>>>>> port > > >>>>>>>> are > > >>>>>>>> working fine. > > >>>>>>>> -- > > >>>>>>>> Groupe Isolofoam > > >>>>>>>> www.isolofoam.com > > > > > > . > >
First
|
Prev
|
Next
|
Last
Pages: 1 2 3 Prev: DHCPServer Event ID: 1017 & 1010 during backup Next: Trial Media to Open License. |