Q-Link Reloaded
in [Commodore]
|
Prev: Swiftlink Driver
Next: Printing with WinVice and Geos
From: Jim Brain on 31 Oct 2009 14:16 rug_rat wrote: > On Oct 25, 4:23 pm, Jim Brain <br...(a)jbrain.com> wrote: >> rug_rat wrote: >>> I am trying to connect to Q-Link reloaded, and not having any luck. >>> With WINWice I just see the first dash and nothing hapens. >>> With X11 Vice I see the first dash then plusses + keep scrolling >>> across the screen. >>> Is Q-Link reloaded down? Has it changed it's IP address? the current >>> one I have is 66.135.39.36:5190 >>> I can telnet to that address and port, and after hitting enter a few >>> times I get a >>> TERMINAL= prompt. >> That is the correct QLink IP and port and response. I wonder if the IP >> RS232 routines are working. Did you set the modem choice to manual? >> >> jim > > Jim.. > > Thanks for your reply. > > I did, and when I get to the connect screen, I can do an ATDT 5551212, > then hit enter a couple times and I also see TERMINAL= prompts, but > when I hit f1 to connect nothing happens but + + s > I just logged on with my TEST disk here, and here was the settings: In CHANGE ACCESS on the disk, I have: Other command driven modems 1200 baud Automatic Tone +5551212 In WinVICE2.1, I have: Settings->RS232Settings->RS232 Device 1: 66.135.39.36:5190 Settings->Cartridge/IO Settings->RS232 userport settings: Enable RS232 Support, Userport device: RS232 Device 1, Userport baud rate: 1200 I hope that helps. Jim
From: Jim Brain on 31 Oct 2009 14:18 Jim Brain wrote: > rug_rat wrote: >> I did, and when I get to the connect screen, I can do an ATDT 5551212, >> then hit enter a couple times and I also see TERMINAL= prompts, but >> when I hit f1 to connect nothing happens but + + s Oh, when I connect, I just wait for the screen to come up, then hit F1 to connect. That's probably what's messing things up. In essence, there is no modem, so sending the ATDT command is probably just messing up the QLink Server (which is trying emulate a bit of TymNet, as I recall) Jim
From: rug_rat on 1 Nov 2009 10:33
On Oct 31, 10:18 am, Jim Brain <br...(a)jbrain.com> wrote: > Jim Brain wrote: > > rug_rat wrote: > >> I did, and when I get to the connect screen, I can do an ATDT 5551212, > >> then hit enter a couple times and I also see TERMINAL= prompts, but > >> when I hit f1 to connect nothing happens but + + s > > Oh, when I connect, I just wait for the screen to come up, then hit F1 > to connect. That's probably what's messing things up. In essence, > there is no modem, so sending the ATDT command is probably just messing > up the QLink Server (which is trying emulate a bit of TymNet, as I recall) > > Jim If I just hit F1.. I get one - then + plusses all the way across. |