Repair
in [Electronics]
|
Olympus camera overexposes On Thu, 21 Jan 2010 12:40:34 -0800, DaveC <invalid(a)invalid.net> wrote: |>> If the picture is consistently misexposed, then the exposure-compensation |>> control (assuming the camera has one) should fix the problem. |> |>Compensation doesn't fix the problem, it fixes the symptom. The problem |>remains. |> |>... 24 Apr 2010 02:47
safe to use microwave after spark Hello, A family member mistakenly hit the Cook button instead of the Timer and a small spark was seen. He immediately shut off the power and everything looks good. Is it safe to use if all parts are still intact? Thanks for you advise. ... 24 Apr 2010 20:32
Sony ICF-SW7600 portable radio -- all static I've had a great Sony SW7600 portable shortwave/AM/FM radio for years and it has worked very well. It's probably been on for more than ten thousand hours overall. This is the model: http://www.universal-radio.com/catalog/portable/icfsw7600.html A few months ago it started giving only loud static when turned on,... 28 Apr 2010 21:59
Kyocera receiver not remembering stations Question is about a Kyocera R-851 receiver, ca. 1985, 85 w./channel. Unit is in fine condition (many capacitators have been replaced) except for one thing: it doesn't remember radio stations. This receiver has 7 "presets" each for AM and FM. These can be set, and the unit will remember them so long as the powe... 3 May 2010 17:37
Milles Griot 176B I am looking for a power connector pinout on this supply. Not the remote connector. Most of the connections are apparent, but I'm trying to verify a fan output, as I'm told. Greg ... 23 Apr 2010 21:27
RoHS/PbF for customers I have a disgruntled customer with a 2 year old amplifier built into a vibrating box (combo amp and speaker). It has 2 failed solder joints and about 10 visibly and tug-test near to failure joints and perhaps 20 that will fail in the next 5 years perhaps. Where is there a non technical article on the WWW that expla... 25 Apr 2010 17:50
rj12 crimp punch When you crimp and rj11 connector, you are really pushing in the six contacts and the thing that holds the cable in. Ths crimper should therefore be able to be made into a screwdriver sized punch that you can just push in those things. DOes such an rj12 crimp punch exist? - = - Vasos Panagiotopoulos... 23 Apr 2010 21:27
Kyocera receiver not remembering stations--success! On 4/21/2010 12:18 PM David Nebenzahl spake thus: Question is about a Kyocera R-851 receiver, ca. 1985, 85 w./channel. Unit is in fine condition (many capacitators have been replaced) except for one thing: it doesn't remember radio stations. This receiver has 7 "presets" each for AM and FM. These ca... 23 Apr 2010 21:27
Milles Griot 176B In article <usk6ov087.fsf(a)repairfaq.org>, sam(a)repairfaq.org (Samuel M. Goldwasser) wrote: zekfrivo(a)zekfrivolous.com (GregS) writes: I am looking for a power connector pinout on this supply. Not the remote connector. Most of the connections are apparent, but I'm trying to verify a fan output, as I'm tol... 23 Apr 2010 21:26 |