From: Mr. Uh Clem on
John Young wrote:
> In article<j4CdnU9jGo4VW4TWnZ2dnUVZ_oudnZ2d(a)supernews.com>,
> "Mr. Uh Clem"<uhclem(a)DutchElmSt.invalid> wrote:
>
>> John Young wrote:
>>> Is there free Mac software that will allow me to use my Speedlink
>>> SL-6810 webcam with my desktop Mac running v10.6.2?
>>>
>> ... there IS an entry for a Speed Link SL-6820. ...
>> It would seem like there's a good chance it might work, especially
>> if your camera uses the same or a similar controller chip. Should
>> be worth a shot.
>>
>> http://webcam-osx.sourceforge.net/cameras/camera.php?id=685
>>
>> If it works, let the Macam project know that the 6810 works
>> as well by posting to Camera Reports.
>>
>> http://sourceforge.net/projects/webcam-osx/forums/forum/755290
>>
>> Make sure to include full info on the camera.
>>
>> Good luck!
>
> Thank You ... john

Well? Any luck?

--
Clem
"If you push something hard enough, it will fall over."
- Fudd's first law of opposition
From: Mr. Uh Clem on
John Young wrote:
> In article<j4CdnU9jGo4VW4TWnZ2dnUVZ_oudnZ2d(a)supernews.com>,
> "Mr. Uh Clem"<uhclem(a)DutchElmSt.invalid> wrote:
>
>> John Young wrote:
>>> Is there free Mac software that will allow me to use my Speedlink
>>> SL-6810 webcam with my desktop Mac running v10.6.2?
>>>
[...]
>> Oh wait, there IS an entry for a Speed Link SL-6820. [...]
>> It would seem like there's a good chance it might work, especially
>> if your camera uses the same or a similar controller chip. Should
>> be worth a shot.
>>
>> http://webcam-osx.sourceforge.net/cameras/camera.php?id=685
>>
>> If it works, let the Macam project know that the 6810 works
>> as well by posting to Camera Reports.
>>
>> http://sourceforge.net/projects/webcam-osx/forums/forum/755290
>>
>> Make sure to include full info on the camera.
>>
>> Good luck!
>
> Thank You ... john

Any luck? (Inquiring minds here want to know too!)

--
Clem
"If you push something hard enough, it will fall over."
- Fudd's first law of opposition