Prev: No audio
Next: Sprinkler Tee fitting stripped
From: Man-wai Chang to The Door (+MS=32B) on 4 Oct 2009 00:35
> Check CMOS setup and make sure hard drive is the first boot device.

I bet it's irrelevant, but I will test this one later.


--
@~@ Might, Courage, Vision, SINCERITY.
/ v \ Simplicity is Beauty! May the Force and Farce be with you!
/( _ )\ (Ubuntu 9.04) Linux 2.6.30.8
^ ^ 12:34:02 up 8 days 49 min 2 users load average: 0.01 0.06 0.07
不借貸! 不詐騙! 不援交! 不打交! 不打劫! 不自殺! 請考慮綜援 (CSSA):
http://www.swd.gov.hk/tc/index/site_pubsvc/page_socsecu/sub_addressesa
From: Man-wai Chang to The Door (+MS=32B) on 4 Oct 2009 00:37
> You may have problems with the onboard USB ports. There have been
> reports of motherboards with weak power to the USB.

That's what I thought and that's also why I replaced the stock 300W
Bestec power supply with an Antec SmartPower 400W. But it DID NOT help!

> USB PCI cards are cheap, and have cured various USB problems
> for many >folks.

Thanks for the tip.

--
@~@ Might, Courage, Vision, SINCERITY.
/ v \ Simplicity is Beauty! May the Force and Farce be with you!
/( _ )\ (Ubuntu 9.04) Linux 2.6.30.8
^ ^ 12:35:01 up 8 days 50 min 2 users load average: 0.05 0.06 0.07
不借貸! 不詐騙! 不援交! 不打交! 不打劫! 不自殺! 請考慮綜援 (CSSA):
http://www.swd.gov.hk/tc/index/site_pubsvc/page_socsecu/sub_addressesa
First  |  Prev  | 
Pages: 1 2
Prev: No audio
Next: Sprinkler Tee fitting stripped