From: uvbaz on 9 May 2007 07:24 Hi, I am working on an DSP, have problem by data receiving. As listed below, xilinx ise tools build a "DELAYCHAIN" into the circuit, as a result, the data needs 7.956ns from PADS to FlipFlops. My questions are: 1. How can i control the tools, to build or not to build the "DELAYCHAIN". 2. When the data need 7.956ns, to get to the FFs, will it works, when the datarate 150MHz (6.6ns) is? Timing report from XILINX ISE 9.1i ====================================================== Delay type Delay(ns) Logical Resource Tiopi 0.943 i_data<2> i_data_2_IBUF net (fanout=1) 0.063 i_data_2_IBUF Tidockd 6.950 instance1/data_int<2>.DELAYCHAIN instance1/data_int_2 Total 7.956ns (7.893ns logic, 0.063ns route) (99.2% logic, 0.8% route) ======================================================= Thanks Cheng
|
Pages: 1 Prev: Xilinx VHDL Attribute syntax error Next: Uart problem, xapp223 + Spartan3A |