wifi gets disconnected frequently
in [Debian]
|
From: Kurian Thayil on 24 Jul 2010 13:50 Hi All, I am using Squeeze and my Wifi link in my Laptop (Acer 5583 Series) gets frequent disconnections, but gets connected after a few seconds. This happens only with squeeze. While I was using Lenny, it was working fine. So I installed the non-free driver corresponding to Lenny instead of squeeze and tried. But the same issue. The Wifi Module is iwl3945 and the message I get in /var/log/messages while connection/disconnection is given below: Jul 24 23:13:12 squeeze kernel: [ 6775.084909] Registered led device: iwl-phy0::radio Jul 24 23:13:12 squeeze kernel: [ 6775.084949] Registered led device: iwl-phy0::assoc Jul 24 23:13:12 squeeze kernel: [ 6775.084984] Registered led device: iwl-phy0::RX Jul 24 23:13:12 squeeze kernel: [ 6775.085021] Registered led device: iwl-phy0::TX Jul 24 23:13:12 squeeze kernel: [ 6775.093072] ADDRCONF(NETDEV_UP): wlan0: link is not ready Jul 24 23:13:14 squeeze kernel: [ 6776.741328] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Let me know if anyone has a clue on how to fix this. Thank you. Regards, Kurian Thayil.
From: Thomas Amm on 24 Jul 2010 21:10 Am 24.07.2010 19:47, schrieb Kurian Thayil: > I am using Squeeze and my Wifi link in my Laptop (Acer 5583 Series) gets > frequent disconnections, but gets connected after a few seconds. This > happens only with squeeze. While I was using Lenny, it was working fine. So > I installed the non-free driver corresponding to Lenny instead of squeeze > and tried. But the same issue. The Wifi Module is iwl3945 and the message I > get in /var/log/messages while connection/disconnection is given below: (...) > Jul 24 23:13:12 squeeze kernel: [ 6775.085021] Registered led device: > iwl-phy0::TX > Jul 24 23:13:12 squeeze kernel: [ 6775.093072] ADDRCONF(NETDEV_UP): wlan0: > link is not ready > Jul 24 23:13:14 squeeze kernel: [ 6776.741328] ADDRCONF(NETDEV_CHANGE): > wlan0: link becomes ready Is there any kind of wireless encryption involved? WPA-supplicant running in the background? IIRC network-manager activates wpa-supplicant by default -even if there is no wireless interface- and i remember having seen similar behaviour caused by wpa-supplicant and TKIP/AES mismatch between AP and client. -- To UNSUBSCRIBE, email to debian-user-REQUEST(a)lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster(a)lists.debian.org Archive: http://lists.debian.org/4C4B8F03.6050900(a)googlemail.com
From: Ron Johnson on 25 Jul 2010 01:20 On 07/24/2010 08:10 PM, Thomas Amm wrote: > Am 24.07.2010 19:47, schrieb Kurian Thayil: > >> I am using Squeeze and my Wifi link in my Laptop (Acer 5583 Series) gets >> frequent disconnections, but gets connected after a few seconds. This >> happens only with squeeze. While I was using Lenny, it was working fine. So >> I installed the non-free driver corresponding to Lenny instead of squeeze >> and tried. But the same issue. The Wifi Module is iwl3945 and the message I >> get in /var/log/messages while connection/disconnection is given below: > (...) >> Jul 24 23:13:12 squeeze kernel: [ 6775.085021] Registered led device: >> iwl-phy0::TX >> Jul 24 23:13:12 squeeze kernel: [ 6775.093072] ADDRCONF(NETDEV_UP): wlan0: >> link is not ready >> Jul 24 23:13:14 squeeze kernel: [ 6776.741328] ADDRCONF(NETDEV_CHANGE): >> wlan0: link becomes ready > > Is there any kind of wireless encryption involved? WPA-supplicant > running in the background? IIRC network-manager activates wpa-supplicant > by default -even if there is no wireless interface- and i remember > having seen similar behaviour caused by wpa-supplicant and TKIP/AES > mismatch between AP and client. > What was your solution? -- Seek truth from facts. -- To UNSUBSCRIBE, email to debian-user-REQUEST(a)lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster(a)lists.debian.org Archive: http://lists.debian.org/4C4BC8FD.3070405(a)cox.net
From: Thomas Amm on 25 Jul 2010 19:30 Am 25.07.2010 05:56, schrieb Kurian Thayil: > On Sun, Jul 25, 2010 at 6:40 AM, Thomas Amm <ed3ltaud(a)googlemail.com> wrote: > >> Am 24.07.2010 19:47, schrieb Kurian Thayil: >> >>> I am using Squeeze and my Wifi link in my Laptop (Acer 5583 Series) gets >>> frequent disconnections, but gets connected after a few seconds. This >>> happens only with squeeze. While I was using Lenny, it was working fine. >> So >>> I installed the non-free driver corresponding to Lenny instead of squeeze >>> and tried. But the same issue. The Wifi Module is iwl3945 and the message >> I >>> get in /var/log/messages while connection/disconnection is given below: >> (...) >>> Jul 24 23:13:12 squeeze kernel: [ 6775.085021] Registered led device: >>> iwl-phy0::TX >>> Jul 24 23:13:12 squeeze kernel: [ 6775.093072] ADDRCONF(NETDEV_UP): >> wlan0: >>> link is not ready >>> Jul 24 23:13:14 squeeze kernel: [ 6776.741328] ADDRCONF(NETDEV_CHANGE): >>> wlan0: link becomes ready >> >> Is there any kind of wireless encryption involved? WPA-supplicant >> running in the background? IIRC network-manager activates wpa-supplicant >> by default -even if there is no wireless interface- and i remember >> having seen similar behaviour caused by wpa-supplicant and TKIP/AES >> mismatch between AP and client. >> >> >> -- >> To UNSUBSCRIBE, email to debian-user-REQUEST(a)lists.debian.org >> with a subject of "unsubscribe". Trouble? Contact >> listmaster(a)lists.debian.org >> Archive: http://lists.debian.org/4C4B8F03.6050900(a)googlemail.com >> >> Hi Thomas, > > There is no wireless encryption involved. I have only enabled accesslist > based on MAC address. Other than that, there is no security involved between > my laptop and the NetGear wireless router. As you said, wpa-supplicant is > running in the background. When I checked with `ps` this is the output I > got, > > kurianmt(a)squeeze:~$ ps aux |grep wpa > root 2164 0.0 0.1 4756 2336 ? S 09:14 0:00 > /sbin/wpa_supplicant -u -s > kurianmt 2880 0.0 0.0 3116 760 pts/0 S+ 09:24 0:00 grep wpa > > Any idea what to be done? > Kill wpa-supplicant, if it is interfering with ifup. Kill it anyway to find out if it does: fire up wpa_cli as root on a console and enter "terminate" on the CLI. "help" might also be useful for further debugging. If the link stays up then, check if there's DNS (DNS is likely to fail if the default ifup script gets interrupted). Otherwise try to configure the interface by hand. I do not know which tools are used by your specific HW. Might be iwconfig and iwpriv/iwlist or wlanconfig. Anyway "iwconfig" should show you if wpa_supplicant tried to set some options related to encryption/authorization which might cause the interface to connect, wait for authorization, fail and disconnect to try again. -- To UNSUBSCRIBE, email to debian-user-REQUEST(a)lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster(a)lists.debian.org Archive: http://lists.debian.org/4C4CC7D5.8060000(a)googlemail.com
|
Pages: 1 Prev: unwanted repeated messages on Lenny laptop Next: Trouble compiling generic kernel |