Cisco
in [Network]
|
IP SLA issue Hi, Just would like to know the IP SLA value for my network. We set up a MPLS network with 10 locations, among them, 5 sites have resilient links. We do not want false link flapping, our consultant sets up the object tracker with "delay down 25" for notification delay. We want to know how this "25" is worke... 12 Mar 2010 11:37
ASA 5505 Image problem Hi there, I ran erase disk0 by mistake and then rebooted the device, so I received this message and it kept rebooting No images in / Error 15: File not found unable to boot an image Failsafe booting engaged. Default configuration file contains 1 entry. Searching / for images to boot. No images in /... 12 Mar 2010 02:50
ASA5505 Hi all I want to get a ASA5505 Is it possible to monitor it with mrtg and nagios Many thanks ... 10 Mar 2010 09:39
Interface status monitoring Is there any option on a cisco switch to have an interface replicate the status of another interface? Ie. if port fa0/20 goes into status up/down I would like fa0/10 to go to up/down (or admin down - doesn't matter). Is it possible? Flamer. ... 10 Mar 2010 18:40
Conceptual question: Reasoning behind private subnetting scheme? We have a geographically dispersed WAN. All of the offices have 192.168.n.0/24 local IP address. The point-to-point links between all of our routers are taken from the 192.168.65.0/24 network which has been subnetted into 64 two host subnets 192.168.65.0/30. Is there a reason the engineer that set up our networ... 10 Mar 2010 11:54
ap group vlan Hello everyone, I'm trying to assign a separate interface (VLAN) to the same SSID on different APs. For this I have defined a new dynamic interface with a new vlan, I also defined an additional AP group has the same default SSID but changing the interface that is assigned. I took an AP and I've assigned to tha... 10 Mar 2010 10:46
Cisco 1-Port 10 Gigabit Ethernet LAN/WAN-PHY Shared Port Adapter Good evening I would want to ask with regard to module 10 Gigabit Ethernet and configure in WAN from cisco it appears to say that it can use up to 9.3gbps http://www.cisco.com/en/US/prod/collateral/modules/ps6267/product_data_sheet0900aecd80715dc5.html My problem is that it cannot exceed 9.05Gbps It exist... 9 Mar 2010 16:55
Cisco Router and PPPoE Server in a Wisp Enveroniment Hello I would like to ask you an opinion: I would like to put up a WISP and using a Cisco 2600xm as PPPoE Concentrator. I have already done some tests and I can login using an internal list of username/password saved on the IOS Config. It is possibile to avoid using an external radius server (just for tes... 7 Mar 2010 19:33
WE BUY USED AND NEW EQUIPMENT WE BUY USED AND NEW EQUIPMENT The list goes on and on. There are another 100 different models that we are buying besides what we listed below. If you have anything else to sell let me know, we buy all types of Networking and Telephony Equipment We are buying the below at the offers listed. We have some roo... 7 Mar 2010 09:35
Cofiguring ASA 5505: Static IP, DNS, Gateway On Fri, 5 Mar 2010 23:20:39 +0100, Mark Huizer <xaa+news_comp.dcom.sys.cisco(a)dohd.org> wrote: The wise Buck Rogers enlightened me with: Hello, Sorry for top posting.........I was wondering if I could get some input on my question below concerning the ISP's gateway and where (if at all) does it ... 6 Mar 2010 17:22 |