Cisco

Windows 7 and Client 5.0.05.0290 Starting before log on...
Is it possible to get this client to start before logon? In XP, there was an option for that. Now installing on Windows 7 it is gone. I have several new Windows 7 Enterprise (32Bit) users that I would like to set this up. We are running into issues with Mapped drives and such that isn't working as we need. TI... 5 Apr 2010 13:50

PIX act as VPN client
I occasionally connect to work via a software checkpoint VPN client on my PC. What I would like to do, is configure the tunnel on my PIX 515e so its either always connected or dial on demand when I try and access it. Is this possible to do? do I just setup a VPN using the same settings as the Checkpoint softwa... 29 Mar 2010 20:18

Logging wifi accesses
I have a 871W router with a wifi dot11 radio setup. It sIP address is 10.0.0.1 When a station connects, I get logs such as: Mar 28 06:18:14 10.0.0.1 1417: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0025.004d.4765 Reason: Previous authentication no longer valid SSID[VaxinationWiFi] Ma... 7 Apr 2010 13:28

PIX ASA : Need to setup a server in a DMZ such that
Am 26.03.2010 20:11 schrieb barret bonden: Need to setup a web server in a DMZ such that 1) computers on the INSIDE interface can , on a microsoft LAN, browse to and copy files FROM the server in the DMZ to themselves in the inside 2) If the server in the DMZ is hacked it will prevent attack on the inside ... 2 Apr 2010 17:03

PIX ASA : Need to setup a server in a DMZ such that
Need to setup a web server in a DMZ such that 1) computers on the INSIDE interface can , on a microsoft LAN, browse to and copy files FROM the server in the DMZ to themselves in the inside 2) If the server in the DMZ is hacked it will prevent attack on the inside computers. I need to: 1) know this is poss... 26 Mar 2010 15:34

Question on 802.11b channel assignments
I've got a remote site that has a total of 25 1131 access points under the control of a 4402 WLC. A few locations in the building (mostly where the heaviest use is), are reporting connection drops and slowness (connection speed changes several times). I've been looking at the channel assignments. In one particula... 1 Apr 2010 17:58

security of PPTP server
On a normal IOS (12.4) Cisco router we are running a PPTP server for connections from mobile Windows machines via UMTS. Nothing special: vpdn enable ! vpdn-group 1 ! Default PPTP VPDN group accept-dialin protocol pptp virtual-template 1 ! interface Virtual-Template1 description PPTP VPN template ... 10 Apr 2010 10:10

storm-control question
I'm reviewing some configs that were done before I got here. I had a quick question on storm-control that I've never been sure about. The command "storm-control action trap"... does that just generate traps when passing the threshold levels, or does it filter too? I've seen posts in doing searches that say that it'... 30 Mar 2010 18:21

ASA5505- can I transfer a config
Hi there is there anyway to replace and ASA5505 config file with a config.txt or other format, I have to setup 10 ASA, all the same config except some IPs and So I m looking for a quick way to do that? Rob ... 27 Mar 2010 16:30

Routing between interfaces on a MW-ESW-16
I have a 2851 with an MW-ESW-16 card. I can route just fine between either of the 2851's GigE interfaces and the ESW-16's interfaces, but cannot get it to route between 2 ESW-16 interfaces. Here are my port configs. interface FastEthernet1/3 description LAN I/F no switchport ip address 10.255.253.254 255... 24 Mar 2010 22:45