Developing/compiling software
in [Embedded]
|
From: Rich Webb on 16 Sep 2009 10:04 On Wed, 16 Sep 2009 13:39:03 +0100, "FreeRTOS info" <noemail(a)mentioned.com> wrote: > > >"Rich Webb" <bbew.ar(a)mapson.nozirev.ten> wrote in message >news:ggl1b5dd7k9f31qs3mbn2su0qee7p0hete(a)4ax.com... >> On Wed, 16 Sep 2009 11:25:44 +0200, "Meindert Sprang" >> <ms(a)NOJUNKcustomORSPAMware.nl> wrote: >> >>>"Lodewicus Maas" <wicus.maas(a)gmail.com> wrote in message >>>news:EeWdna48jIcnOi3XnZ2dnUVZ8hKdnZ2d(a)saix.net... >>>> HI All >>>> >>>> I've looked at Keil uVIsion (Trial Version) as well as Asem51v1.3 (old >>>> stuff). >>>> >>>> Any suggestions of the compiler software you're using to write/compile >>>your >>>> code and create hex files to upload to the ATMEL microcontrollers. >>> >>>I am using ImageCraft for the AVR. Cheap and good. Excellent support. >> >> Second vote here for Imagecraft. Been using it professionally for >> several years. > >Do ImageCraft make 8051 tools? D'oh! for (i = 0; i < 100; ++i) { printf("Atmel is not one-to-one with AVRs!\n"); } -- Rich Webb Norfolk, VA
From: Grant Edwards on 16 Sep 2009 10:43 On 2009-09-16, Lodewicus Maas <wicus.maas(a)gmail.com> wrote: > HI All > > I've looked at Keil uVIsion (Trial Version) as well as Asem51v1.3 (old > stuff). > > Any suggestions of the compiler software you're using to write/compile your > code and create hex files to upload to the ATMEL microcontrollers. I prefer gcc. It's the compiler I use for 8 other processors, and I find it helps productivity to use the same set of tools on multiple projects even when the processor differs. -- Grant Edwards grante Yow! I am a jelly donut. at I am a jelly donut. visi.com
From: Not Really Me on 16 Sep 2009 10:56 Lodewicus Maas wrote: > HI All > > I've looked at Keil uVIsion (Trial Version) as well as Asem51v1.3 (old > stuff). > > Any suggestions of the compiler software you're using to > write/compile your code and create hex files to upload to the ATMEL > microcontrollers. I > would rather review a few other options, than to invest in the Keil > software, only to discover afterwards that there are maybe better tools > for the job > > (Apologies for my tenses/grammar - English is my second language) > > Kind Regards > The Keil tools are an excellent choice for 8051 development. In particular their simulator is really good. Allows device specific settings, so you can simulate the I/O on your chip. You can also have it use your PC serial port as the serial connection to the simulation. -- Scott Validated Software Lafayette, CO __________ Information from ESET NOD32 Antivirus, version of virus signature database 4430 (20090916) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
From: FreeRTOS info on 16 Sep 2009 11:03 "Grant Edwards" <invalid(a)invalid> wrote in message news:uYKdne44RbcfZC3XnZ2dnUVZ_tednZ2d(a)posted.visi... > On 2009-09-16, Lodewicus Maas <wicus.maas(a)gmail.com> wrote: >> HI All >> >> I've looked at Keil uVIsion (Trial Version) as well as Asem51v1.3 (old >> stuff). >> >> Any suggestions of the compiler software you're using to write/compile >> your >> code and create hex files to upload to the ATMEL microcontrollers. > > I prefer gcc. It's the compiler I use for 8 other processors, > and I find it helps productivity to use the same set of tools > on multiple projects even when the processor differs. Is there a GCC for the 8051? SDCC yes, GCC, as far as I know, no. -- Regards, Richard. + http://www.FreeRTOS.org Designed for Microcontrollers. More than 7000 downloads per month. + http://www.SafeRTOS.com Certified by T�V as meeting the requirements for safety related systems
From: Grant Edwards on 16 Sep 2009 12:13
On 2009-09-16, FreeRTOS info <noemail(a)mentioned.com> wrote: >>> Any suggestions of the compiler software you're using to >>> write/compile your code and create hex files to upload to the >>> ATMEL microcontrollers. >> >> I prefer gcc. It's the compiler I use for 8 other processors, >> and I find it helps productivity to use the same set of tools >> on multiple projects even when the processor differs. > > Is there a GCC for the 8051? SDCC yes, GCC, as far as I know, no. Oops. I didn't realize the OP meant 8051. I assumed he meant AVR, AVR32, or ARM. To answer you question, there isn't an 8051 backend for gcc. -- Grant Edwards grante Yow! I'm shaving!! at I'M SHAVING!! visi.com |