How Does Your CADCAM System Handle Real World Simulation Tasks? [SolidWorks]

Prev: Wabash Live
Next: Help with a 1960's era drawing call out...

From: Joe788 on 9 Dec 2009 21:44

While losers who can't back up what they have to say continue to post
complete and utter bullshit and spin consider that the Jon Banquer
blog can always back it up with FACTS!

The Jon Banquer blog has added two new screen shots showing exactly
what Mastercam can't do and DP Technology Esprit can easily do with
very little effort on the users part. Is it any wonder that so many
machining job shops that use Mastercam are adding DP Technology
Esprit? The reason for this is straight forward and as simple as it
gets:

Mastercam can't get the job done like DP Technology Esprit can.

http://jonbanquer.wordpress.com/dp-technology-esprit-vs-mastercam-x4/

How does your CADCAM system handle real world simulation tasks like
those that have been described and are now shown on the Jon Banquer
blog?

The Jon Banquer blog is the world leader in providing original CAM-
centric content. If you're not reading the Jon Banquer blog you can be
sure of one thing... your competition is! ;>)

http://jonbanquer.wordpress.com/dp-technology-esprit-vs-mastercam-x4/

From: Joe788 on 9 Dec 2009 22:13

On Dec 9, 6:44 pm, Joe788 <larryro...(a)yahoo.com> wrote:
> While losers who can't back up what they have to say continue to post
> complete and utter bullshit and spin consider that the Jon Banquer
> blog can always back it up with FACTS!
>
> The Jon Banquer blog has added two new screen shots showing exactly
> what Mastercam can't do and DP Technology Esprit can easily do with
> very little effort on the users part. Is it any wonder that so many
> machining job shops that use Mastercam are adding DP Technology
> Esprit? The reason for this is straight forward and as simple as it
> gets:
>
> Mastercam can't get the job done like DP Technology Esprit can.
>
> http://jonbanquer.wordpress.com/dp-technology-esprit-vs-mastercam-x4/
>
> How does your CADCAM system handle real world simulation tasks like
> those that have been described and are now shown on the Jon Banquer
> blog?
>
> The Jon Banquer blog is the world leader in providing original CAM-
> centric content. If you're not reading the Jon Banquer blog you can be
> sure of one thing... your competition is! ;>)
>
> http://jonbanquer.wordpress.com/dp-technology-esprit-vs-mastercam-x4/

"FACTS"? Like the FACT that your "problem" with mask on arc was
completely self inflicted?

The FACT that you signed up a fake name on emastercam so you could
complain about Mastercam's inability to machine an open pocket, only
to be quickly rebuffed by people who actually know what they are
doing?

The FACT is that you are utterly helpless on virtually every aspect of
Mastercam.

If you spent 1/10th the time using and learning the software, as you
do complaining about it, you wouldn't have nearly so many complaints.
Then again, you are not even remotely sane, so who knows what would
happen.

From: Joe788 on 9 Dec 2009 23:38

From: Joe788 on 10 Dec 2009 12:18

On Dec 9, 8:38 pm, Joe788 <larryro...(a)yahoo.com> wrote:
> While losers who can't back up what they have to say continue to post
> complete and utter bullshit and spin consider that the Jon Banquer
> blog can always back it up with FACTS!
>
> The Jon Banquer blog has added two new screen shots showing exactly
> what Mastercam can't do and DP Technology Esprit can easily do with
> very little effort on the users part. Is it any wonder that so many
> machining job shops that use Mastercam are adding DP Technology
> Esprit? The reason for this is straight forward and as simple as it
> gets:
>
> Mastercam can't get the job done like DP Technology Esprit can.
>
> http://jonbanquer.wordpress.com/dp-technology-esprit-vs-mastercam-x4/
>
> How does your CADCAM system handle real world simulation tasks like
> those that have been described and are now shown on the Jon Banquer
> blog?
>
> The Jon Banquer blog is the world leader in providing original CAM-
> centric content. If you're not reading the Jon Banquer blog you can be
> sure of one thing... your competition is! ;>)
>
> http://jonbanquer.wordpress.com/dp-technology-esprit-vs-mastercam-x4/

"FACTS"? Like the FACT that your "problem" with mask on arc was
completely self inflicted?

The FACT that you signed up a fake name on emastercam so you could
complain about Mastercam's inability to machine an open pocket, only
to be quickly rebuffed by people who actually know what they are
doing?

The FACT is that you are utterly helpless on virtually every aspect of
Mastercam.

If you spent 1/10th the time using and learning the software, as you
do complaining about it, you wouldn't have nearly so many complaints.
Then again, you are not even remotely sane, so who knows what would
happen.

Or are you talking about the FACT that you've been banned from all of
the popular machining related message boards numerous times, because
of your completely insane behavior?

From: Joe788 on 10 Dec 2009 22:25

First | Prev | Next | Last
Pages: 1 2 3 4 5
Prev: Wabash Live
Next: Help with a 1960's era drawing call out...