Repair

Circuit for DeWalt Charger DE9107-XE
grames Wrote: The said charger has a couple of components that have failed to the point of not being identifiable. A circuit diagram would be great. Model: DE9107-XE 220/240v (Australia) 7.2 / 14.4v Thanks, Grames Hi Grames, Can you tell me what type of transistor is used which is att... 8 Jan 2007 05:48

Dell 17" LCD monitor shuts down.
This 17" Dell monitor, model number CN-0M1609-4633-3AG-2DTL, will power on when AC is first applied. In the middle of the screen appears, "Dell Genesis Display Perfection." Then it disappears after a second. When you press the power button with no input signal, the Dell self test feature check illuminates in the b... 9 Jan 2007 16:45

Magnavox TV 27MS3404/17 Turns On, Then Goes Off
Hi, I have a Magnavox TV model 27MS3404/17, chassis L01.1UAC-7638 (mfg. 06/05) in my service shop that comes on, picture shows for about two seconds, then the TV goes "off", but the power indicator light stays on. Note: I can turn the TV off "completely" which makes the power indicator light go off. ... 10 Jan 2007 22:51

LG Microwave Oven
This microwave stopped heating. I tested the elctrical circuits and discovered a bad diode that was connected to the capacitor. I called LG due to no part#'s. in the manuals. I called and spoke to the parts dept. , they told me that they can not identify the part due to too many diodes in the system.The diode has the ... 31 Dec 2006 20:35

Stepping Motors, Hobby Motors for Sale
I have numerous motors and stepping motors for sale. These are pulls from working CD Roms, scanners, laser printers, toys, printers, lathes and tape drives. All are guaranteed not to be DOA. My prices can not be beat! EBAY References are available For more info please contact me at: therepairmanREMOVETHIS(a)opt... 26 Dec 2006 10:02

Panasonic CT-36G23W Shuts Off Intermittently
I have a 36" Panasonic CT-36G23W TV which keeps on shutting off intermittently. There is no picture or sound once it shuts off. I have no LED lights in the front of the TV to give any type of diagnose codes. It has been happening for months now and sometimes it will come back on by itself within 5- 25 minutes. ... 25 Dec 2006 13:30

Philips DFR1500 PSU board question
Have on the bench a Philips DFR1500 DVD/Home theater unit, The resistor #R12 on the C911 PSU board is burnt, beyond knowing what the color code used to be. Anyone have a similar unit that you can check for the value? Or a schematic, or service manual? Any help is appreciated! Thanks in advance, doug s... 23 Dec 2006 10:57

Ser_99mt.exe -Any Chance??
hello, Ok, I have this NEC Multisync MT1040 projector and the colors are unaligned. According to the repair guild I should use the software to re-align them. The program to do it is called Ser_99mt.exe. So, Just curious if anyone has this. I know its a shot in the dark but I got the projector free and just wan... 12 Dec 2006 22:32

1990 Zenith horizontal width is too wide
I own a Zenith model SS1913W (Made in 1990) with a slight problem: The horizontal width is too wide - cuts off lots of picture. No marked pots to set it. I don't work on TVs, but it seemed it was somthing to do with the flyback Xformer. How would one set it? Thanks, Lee -- Lee Haymond ----------------... 3 Jan 2007 00:49

New LCD TV
I don't know if this is the right place to ask this question, but I'll ask it anyway. I just bought a $2,000 dollar Sony 40" 1080 LCD tv (Sony KDL-40V2500). We don't have an HD box, but do have some nice Monster cables and all of that stuff. When I hooked up my DirectTV box to the tv, the picture quality is abso... 13 Dec 2006 06:15