SBS 2008 - No Incoming Mail
|
From: akram on 8 Apr 2010 08:58 here is the results All Issues Exchange Server 2007 with Service Pack 1 : The server SALISITSESERVER is running Exchange Server 2007 with Service Pack 1; however, Service Pack 2 for Exchange Server 2007 is available. For more information, see "You cannot install Exchange Server 2007 Service Pack 2 on a Windows Small Business Server 2008-based computer" in the Microsoft Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=163940. %PubFQNPre%.%PubFQNProvider% does not exist in the BackConnectionHostNames registry key : The BackConnectionHostNames key should include the value %PubFQNPre%.%PubFQNProvider%. To resolve this issue, open Registry Editor, and then locate and click HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\BackConnectionHostNames. Right-click BackConnectionHostNames, and then click Modify. In the Value data box, type %PubFQNPre%.%PubFQNProvider%, and then click OK. Add-On Congestion Control Provider : Add-On Congestion Control Provider is set to ctcp. To disable Add-On Congestion Control Provider, click Start, and in the Search box type "command." in the results, right-click Command Prompt, and then click Run as administrator. At the command prompt, run the following command: netsh int tcp set global congestion=none EDNS is enabled : EDNS is enabled on this server. Some of the routers or firewalls may not support EDNS. You should disable EDNS on this server. To do so, click Start, and then click Command Prompt. In the Command Prompt window, type dnscmd /Config /EnableEdnsProbes 0 and then restart the DNS Server service. Firewall is disabled : The Firewall has been disabled and by default is enabled on Windows Small Business Server IE Enhanced Security disabled : IE Enhanced Security is currently disabled for Administrators. To enable IE Enhanced Security go to Start/Server Manager and click on the Configure IE ESC link on the right. IE Enhanced Security disabled : IE Enhanced Security is currently disabled for Users. To enable IE Enhanced Security go to Start/Server Manager and click on the Configure IE ESC link on the right. Local activation permission to the IIS WAMREG Admin Service required : The Network Service is missing local activation permissions to the IIS WAMREG admin Service in accordance with the event ID 10016 in the system event log. For more information, see KB "Event ID error messages 10016 and 10017 are logged in the System log after you install Windows SharePoint Services 3.0" at http://go.microsoft.com/fwlink/?LinkId=128063. Note: This warning will continue to appear until at least 24 hours have passed since the most recent occurrence of event 10016. No MaxConcurrentRequestsPerCPU value : The MaxConcurrentRequestsPerCPU value does not exist under HLKM\SOFTWARE\Microsoft\ASP.NET\2.0.50727.0. OriginalMachineName registry key not correct : The HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\90\Machines\originalmachinename registry value does not match the current machine name of SALISITSESERVER Receive Window Auto-Tuning Level : Receive Window Auto-Tuning Level is set to normal. To disable Receive Window Auto-Tuning Level, click Start, and in the Search box type "command." in the results, right-click Command Prompt, and then click Run as administrator. At the command prompt, run the following command: netsh int tcp set global autotuning=disabled Receive-Side Scaling State : Receive-Side Scaling State is set to enabled. To disable Receive-Side Scaling, click Start, and in the Search box type "command." in the results, right-click Command Prompt, and then click Run as administrator. At the command prompt, run the following command: netsh int tcp set global rss=disabled Task Offload : Task Offload is set to enabled. To disable Task Offload, click Start, and in the Search box type "command." in the results, right-click Command Prompt, and then click Run as administrator. At the command prompt, run the the following command: netsh int ip set global taskoffload=disabled The BackConnectionHostNames registry key does not exist : The registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\BackConnectionHostNames does not exist. To resolve this issue, open Registry Editor, and then locate and click HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\. Right-click MSV1_0, point to New, and then click Multi-String Value. Type BackConnectionHostNames, and then press ENTER. The Companyweb value does not exist in the BackConnectionHostNames registry key : The Companyweb value does not exist in the BackConnectionHostNames registry key. To resolve this issue, open Registry Editor, and then locate and click HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\BackConnectionHostNames. Right-click BackConnectionHostNames, and then click Modify, In the Value data box, type Companyweb, and then click OK. The DNS parameter MaxCacheTTL is not set : The DNS parameter MaxCacheTTL is not set. For more information, see ”Windows Server 2008 DNS Servers may fail to resolve queries for some top-level domains” in the Microsoft Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=152402. The IPv6 protocol is not enabled : Open the Properties page for the network adapter, and then select TCP/IPv6. Windows Small Business Server 2008 is designed to function with IPv6 enabled. If you need to disable IPv6, you should run Fix It Wizard 50045 at http://go.microsoft.com/fwlink/?LinkId=159700 to ensure that the server functions correctly. User account does not show in the Windows SBS Console : The user account spadmin does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account admin does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Johanna Stephan does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Timm Tiller does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Paul Dietze does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Marco Joerg does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Alexandra Leeman does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Camden DeLong does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Tilmann Hepperle does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Ralf Bischofs does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Lina Huppertz does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Daniela Spasiewski does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Manuela Patnaik does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Dr.Florian Amereller does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Dr. Stephan Jaeger does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Dr. Kilian Baelz does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Ingy Rasekh does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Elvira Tarara does not have the attributes that are necessary for it to display in the Windows SBS Console. Windows SBS 2008 is running on a virtual machine : Windows SBS 2008 is running on a virtual machine. Windows SBS Update Rollup 3 is not installed : Update Rollup 3 for Windows Small Business Server 2008 is not installed. For more information, see "Description of Windows Small Business Server 2008 Update Rollup 3" in the Microsoft Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=163941. "Larry Struckmeyer[SBS-MVP]" wrote: > Akram: > > We have asked you several times for more information. Yes... thousands have > incoming mail working on SBS 2008. It just works. But if yours does not, > we need to know what you are trying to do and where the breakdown occurs. > > Please give us more details. > > - > Larry > Please post the resolution to your > issue so others may benefit > - > Get Your SBS Health Check at > www.sbsbpa.com > > > > does anyone did incoming mail working on SBS2008? > > > > please anyone reply > > > > "Akram Mokhtar" wrote: > > > >> yes i have stopped all the exchange services > >> and i started smtp service in the IIS and this is working with the > >> incoming > >> i explain more now > >> i have document library in sharepoint site , and i have enabled it > >> for incoming mail but when i send the mail ,it stuck in the exchange > >> and doesn't appear in the documnet library , i stopped the exchanges > >> services > >> > >> and install the smtp and start it's service and i send the email from > >> outside like hotmail ,the library recive the mail inside it > >> > >> why the exchange doesn't recive the email and then the sharepoint > >> timer service take it to the library > >> > >> i have done the solution b4 but the exchange in aserver and the > >> sharepoint with smtp with it on another server and it works > >> > >> i want to make the exchange with sharepoing on the same server as SBS > >> 2008 , and make the incoming mail works? > >> > >> look plz at this forum link ,if i allowed to put this link > >> http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server > >> /MS-SharePoint/Q_24911090.html > >> > >> "SuperGumby [SBS MVP]" wrote: > >> > >>> I'm sorry akram but you are just not describing the problem very > >>> well. > >>> > >>> HOW have you 'email put in the library'? Just what do you mean by > >>> this? > >>> > >>> If you stop Exchange there should be no SMTP to use. What do you > >>> mean by this? Have you in some way created an additional SMTP server > >>> in IIS? somehow associated this with your sharepoint site? > >>> > >>> What instructions have you been following and what steps have you > >>> taken? > >>> > >>> "akram" <akram(a)discussions.microsoft.com> wrote in message > >>> news:A0F1AA21-789A-4468-BD28-B5D77B2DFB50(a)microsoft.com... > >>> > >>>> my question is : i cannot make the incoming mail work with exchange > >>>> on the server with the sharepoint > >>>> > >>>> when i send email to the email i put in the librabry it doesn't > >>>> save > >>>> inside > >>>> the document library > >>>> i stopped the exchange and use the smtp and it works > >>>> so i need step by step what to do in the exchange to act like the > >>>> smtp and > >>>> make it work? > >>>> any sugguestions? > >>>> "Ace Fekay [MVP-DS, MCT]" wrote: > >>>> > >>>>> "Russ SBITS.Biz [SBS-MVP]" <russ(a)REMOVETHIS.sbits.biz> wrote in > >>>>> message news:A889CD93-D95D-4C96-A19E-F64DEDA98F19(a)microsoft.com... > >>>>> > >>>>> The poster's original post hinted at no email coming in at all, > >>>>> whether from the internet or otherwise. After reading it over a > >>>>> few times, albeit I agree there isn't enough information, but I > >>>>> *think* he's trying to get a document scanning system to email > >>>>> scans to Sharepoint. However, the post goes on that the poster is > >>>>> trying to configure inbound email. > >>>>> > >>>>> What I'm starting to think is Exchange is not receiving emails > >>>>> from the document scanner, and Exchange simply needs to be set to > >>>>> allow relaying from the system. Usually in this case, I create a > >>>>> user account for this purpose and set the scanner to send emails > >>>>> from that address, and provide credentials for the SMTP server > >>>>> configuration in the scanner. > >>>>> > >>>>> However, I agree with you and Larry, that we definitely need more > >>>>> *specific* information on what he's trying to accomplish, what was > >>>>> done so far, and if Exchange is actually receiving outside emails, > >>>>> and if there are any Event log errors, which may help to indicate > >>>>> if the Transport service is rejecting any emails from the scanner, > >>>>> that is if he's gotten that far. > >>>>> > >>>>> -- Ace > >>>>> > >>>>> This posting is provided "AS-IS" with no warranties or guarantees > >>>>> and confers no rights. > >>>>> > >>>>> Please reply back to the newsgroup or forum for collaboration > >>>>> benefit among responding engineers, and to help others benefit > >>>>> from your resolution. > >>>>> > >>>>> Ace Fekay, MVP, MCT, MCITP EA, MCTS Windows 2008 & Exchange 2007, > >>>>> MCSE & > >>>>> MCSA 2003/2000, MCSA Messaging 2003 > >>>>> Microsoft Certified Trainer > >>>>> Microsoft MVP - Directory Services > >>>>> If you feel this is an urgent issue and require immediate > >>>>> assistance, please contact Microsoft PSS directly. Please check > >>>>> http://support.microsoft.com for regional support phone numbers. > >>>>> > >>>>>> I agree with Larry, your Question and your Link to a Scanner? Is > >>>>>> confusing > >>>>>> > >>>>>> If you are talking just email in General Here is some > >>>>>> instructions > >>>>>> http://technet.microsoft.com/en-us/library/cc794273(WS.10).aspx > >>>>>> > >>>>>> If it is something else please give us some more details > >>>>>> Thanks > >>>>>> Russ > >>>>>> -- > >>>>>> Russell Grover - SBITS.Biz [SBS-MVP] > >>>>>> MCP, MCPS, MCNPS, SBSC > >>>>>> Small Business Server/Computer Support - www.SBITS.Biz > >>>>>> Question or Second Opinion - www.PersonalITConsultant.com > >>>>>> BPOS - Microsoft Online Services - > >>>>>> www.Microsoft-Online-Services.com > >>>>>> "Larry Struckmeyer[SBS-MVP]" <lstruckmeyer(a)mis-wizards.com> wrote > >>>>>> in > >>>>>> message > >>>>>> news:4e683515df048cc9c860e8b8e67(a)news.microsoft.com... > >>>>>>> Akram: > >>>>>>> > >>>>>>> Can you please give more details as to what you are trying to > >>>>>>> do? The link you gave is to scan from a MFC device on the LAN > >>>>>>> so that the scan will be sent to the users exchange inbox? > >>>>>>> > >>>>>>> Is that the goal, or something else having to do with Email? > >>>>>>> > >>>>>>> - > >>>>>>> Larry > >>>>>>> Please post the resolution to your > >>>>>>> issue so others may benefit > >>>>>>> - > >>>>>>> Get Your SBS Health Check at > >>>>>>> www.sbsbpa.com > >>>>>>>> i have windows SBS 2008 - exhange on it and sharepoint wss also > >>>>>>>> on it > >>>>>>>> i cannot configure incoming mail , cause all solution says > >>>>>>>> about smtp > >>>>>>>> for > >>>>>>>> the sharepoint in another server . > >>>>>>>> i found that we can do the incoming mail from this article > >>>>>>>> http://blog.mpecsinc.ca/2009/09/sbs-2008-mfpcopier-to-scan-to-e > >>>>>>>> -mail.h > >>>>>>>> tml > >>>>>>>> i did but with no success > >>>>>>>> but it's not explaining how to in more detailes > >>>>>>>> can anyone help me on this issue? > >>>>> . > >>>>> > >>> . > >>> > > > . >
From: akram on 8 Apr 2010 09:02 All Issues Exchange Server 2007 with Service Pack 1 : The server SALISITSESERVER is running Exchange Server 2007 with Service Pack 1; however, Service Pack 2 for Exchange Server 2007 is available. For more information, see "You cannot install Exchange Server 2007 Service Pack 2 on a Windows Small Business Server 2008-based computer" in the Microsoft Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=163940. %PubFQNPre%.%PubFQNProvider% does not exist in the BackConnectionHostNames registry key : The BackConnectionHostNames key should include the value %PubFQNPre%.%PubFQNProvider%. To resolve this issue, open Registry Editor, and then locate and click HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\BackConnectionHostNames. Right-click BackConnectionHostNames, and then click Modify. In the Value data box, type %PubFQNPre%.%PubFQNProvider%, and then click OK. Add-On Congestion Control Provider : Add-On Congestion Control Provider is set to ctcp. To disable Add-On Congestion Control Provider, click Start, and in the Search box type "command." in the results, right-click Command Prompt, and then click Run as administrator. At the command prompt, run the following command: netsh int tcp set global congestion=none EDNS is enabled : EDNS is enabled on this server. Some of the routers or firewalls may not support EDNS. You should disable EDNS on this server. To do so, click Start, and then click Command Prompt. In the Command Prompt window, type dnscmd /Config /EnableEdnsProbes 0 and then restart the DNS Server service. Firewall is disabled : The Firewall has been disabled and by default is enabled on Windows Small Business Server IE Enhanced Security disabled : IE Enhanced Security is currently disabled for Administrators. To enable IE Enhanced Security go to Start/Server Manager and click on the Configure IE ESC link on the right. IE Enhanced Security disabled : IE Enhanced Security is currently disabled for Users. To enable IE Enhanced Security go to Start/Server Manager and click on the Configure IE ESC link on the right. Local activation permission to the IIS WAMREG Admin Service required : The Network Service is missing local activation permissions to the IIS WAMREG admin Service in accordance with the event ID 10016 in the system event log. For more information, see KB "Event ID error messages 10016 and 10017 are logged in the System log after you install Windows SharePoint Services 3.0" at http://go.microsoft.com/fwlink/?LinkId=128063. Note: This warning will continue to appear until at least 24 hours have passed since the most recent occurrence of event 10016. No MaxConcurrentRequestsPerCPU value : The MaxConcurrentRequestsPerCPU value does not exist under HLKM\SOFTWARE\Microsoft\ASP.NET\2.0.50727.0. OriginalMachineName registry key not correct : The HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\90\Machines\originalmachinename registry value does not match the current machine name of SALISITSESERVER Receive Window Auto-Tuning Level : Receive Window Auto-Tuning Level is set to normal. To disable Receive Window Auto-Tuning Level, click Start, and in the Search box type "command." in the results, right-click Command Prompt, and then click Run as administrator. At the command prompt, run the following command: netsh int tcp set global autotuning=disabled Receive-Side Scaling State : Receive-Side Scaling State is set to enabled. To disable Receive-Side Scaling, click Start, and in the Search box type "command." in the results, right-click Command Prompt, and then click Run as administrator. At the command prompt, run the following command: netsh int tcp set global rss=disabled Task Offload : Task Offload is set to enabled. To disable Task Offload, click Start, and in the Search box type "command." in the results, right-click Command Prompt, and then click Run as administrator. At the command prompt, run the the following command: netsh int ip set global taskoffload=disabled The BackConnectionHostNames registry key does not exist : The registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\BackConnectionHostNames does not exist. To resolve this issue, open Registry Editor, and then locate and click HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\. Right-click MSV1_0, point to New, and then click Multi-String Value. Type BackConnectionHostNames, and then press ENTER. The Companyweb value does not exist in the BackConnectionHostNames registry key : The Companyweb value does not exist in the BackConnectionHostNames registry key. To resolve this issue, open Registry Editor, and then locate and click HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\BackConnectionHostNames. Right-click BackConnectionHostNames, and then click Modify, In the Value data box, type Companyweb, and then click OK. The DNS parameter MaxCacheTTL is not set : The DNS parameter MaxCacheTTL is not set. For more information, see ”Windows Server 2008 DNS Servers may fail to resolve queries for some top-level domains” in the Microsoft Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=152402. The IPv6 protocol is not enabled : Open the Properties page for the network adapter, and then select TCP/IPv6. Windows Small Business Server 2008 is designed to function with IPv6 enabled. If you need to disable IPv6, you should run Fix It Wizard 50045 at http://go.microsoft.com/fwlink/?LinkId=159700 to ensure that the server functions correctly. User account does not show in the Windows SBS Console : The user account spadmin does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account admin does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Johanna Stephan does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Timm Tiller does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Paul Dietze does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Marco Joerg does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Alexandra Leeman does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Camden DeLong does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Tilmann Hepperle does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Ralf Bischofs does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Lina Huppertz does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Daniela Spasiewski does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Manuela Patnaik does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Dr.Florian Amereller does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Dr. Stephan Jaeger does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Dr. Kilian Baelz does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Ingy Rasekh does not have the attributes that are necessary for it to display in the Windows SBS Console. User account does not show in the Windows SBS Console : The user account Elvira Tarara does not have the attributes that are necessary for it to display in the Windows SBS Console. Windows SBS 2008 is running on a virtual machine : Windows SBS 2008 is running on a virtual machine. Windows SBS Update Rollup 3 is not installed : Update Rollup 3 for Windows Small Business Server 2008 is not installed. For more information, see "Description of Windows Small Business Server 2008 Update Rollup 3" in the Microsoft Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=163941. "Larry Struckmeyer[SBS-MVP]" wrote: > Akram: > > We have asked you several times for more information. Yes... thousands have > incoming mail working on SBS 2008. It just works. But if yours does not, > we need to know what you are trying to do and where the breakdown occurs. > > Please give us more details. > > - > Larry > Please post the resolution to your > issue so others may benefit > - > Get Your SBS Health Check at > www.sbsbpa.com > > > > does anyone did incoming mail working on SBS2008? > > > > please anyone reply > > > > "Akram Mokhtar" wrote: > > > >> yes i have stopped all the exchange services > >> and i started smtp service in the IIS and this is working with the > >> incoming > >> i explain more now > >> i have document library in sharepoint site , and i have enabled it > >> for incoming mail but when i send the mail ,it stuck in the exchange > >> and doesn't appear in the documnet library , i stopped the exchanges > >> services > >> > >> and install the smtp and start it's service and i send the email from > >> outside like hotmail ,the library recive the mail inside it > >> > >> why the exchange doesn't recive the email and then the sharepoint > >> timer service take it to the library > >> > >> i have done the solution b4 but the exchange in aserver and the > >> sharepoint with smtp with it on another server and it works > >> > >> i want to make the exchange with sharepoing on the same server as SBS > >> 2008 , and make the incoming mail works? > >> > >> look plz at this forum link ,if i allowed to put this link > >> http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server > >> /MS-SharePoint/Q_24911090.html > >> > >> "SuperGumby [SBS MVP]" wrote: > >> > >>> I'm sorry akram but you are just not describing the problem very > >>> well. > >>> > >>> HOW have you 'email put in the library'? Just what do you mean by > >>> this? > >>> > >>> If you stop Exchange there should be no SMTP to use. What do you > >>> mean by this? Have you in some way created an additional SMTP server > >>> in IIS? somehow associated this with your sharepoint site? > >>> > >>> What instructions have you been following and what steps have you > >>> taken? > >>> > >>> "akram" <akram(a)discussions.microsoft.com> wrote in message > >>> news:A0F1AA21-789A-4468-BD28-B5D77B2DFB50(a)microsoft.com... > >>> > >>>> my question is : i cannot make the incoming mail work with exchange > >>>> on the server with the sharepoint > >>>> > >>>> when i send email to the email i put in the librabry it doesn't > >>>> save > >>>> inside > >>>> the document library > >>>> i stopped the exchange and use the smtp and it works > >>>> so i need step by step what to do in the exchange to act like the > >>>> smtp and > >>>> make it work? > >>>> any sugguestions? > >>>> "Ace Fekay [MVP-DS, MCT]" wrote: > >>>> > >>>>> "Russ SBITS.Biz [SBS-MVP]" <russ(a)REMOVETHIS.sbits.biz> wrote in > >>>>> message news:A889CD93-D95D-4C96-A19E-F64DEDA98F19(a)microsoft.com... > >>>>> > >>>>> The poster's original post hinted at no email coming in at all, > >>>>> whether from the internet or otherwise. After reading it over a > >>>>> few times, albeit I agree there isn't enough information, but I > >>>>> *think* he's trying to get a document scanning system to email > >>>>> scans to Sharepoint. However, the post goes on that the poster is > >>>>> trying to configure inbound email. > >>>>> > >>>>> What I'm starting to think is Exchange is not receiving emails > >>>>> from the document scanner, and Exchange simply needs to be set to > >>>>> allow relaying from the system. Usually in this case, I create a > >>>>> user account for this purpose and set the scanner to send emails > >>>>> from that address, and provide credentials for the SMTP server > >>>>> configuration in the scanner. > >>>>> > >>>>> However, I agree with you and Larry, that we definitely need more > >>>>> *specific* information on what he's trying to accomplish, what was > >>>>> done so far, and if Exchange is actually receiving outside emails, > >>>>> and if there are any Event log errors, which may help to indicate > >>>>> if the Transport service is rejecting any emails from the scanner, > >>>>> that is if he's gotten that far. > >>>>> > >>>>> -- Ace > >>>>> > >>>>> This posting is provided "AS-IS" with no warranties or guarantees > >>>>> and confers no rights. > >>>>> > >>>>> Please reply back to the newsgroup or forum for collaboration > >>>>> benefit among responding engineers, and to help others benefit > >>>>> from your resolution. > >>>>> > >>>>> Ace Fekay, MVP, MCT, MCITP EA, MCTS Windows 2008 & Exchange 2007, > >>>>> MCSE & > >>>>> MCSA 2003/2000, MCSA Messaging 2003 > >>>>> Microsoft Certified Trainer > >>>>> Microsoft MVP - Directory Services > >>>>> If you feel this is an urgent issue and require immediate > >>>>> assistance, please contact Microsoft PSS directly. Please check > >>>>> http://support.microsoft.com for regional support phone numbers. > >>>>> > >>>>>> I agree with Larry, your Question and your Link to a Scanner? Is > >>>>>> confusing > >>>>>> > >>>>>> If you are talking just email in General Here is some > >>>>>> instructions > >>>>>> http://technet.microsoft.com/en-us/library/cc794273(WS.10).aspx > >>>>>> > >>>>>> If it is something else please give us some more details > >>>>>> Thanks > >>>>>> Russ > >>>>>> -- > >>>>>> Russell Grover - SBITS.Biz [SBS-MVP] > >>>>>> MCP, MCPS, MCNPS, SBSC > >>>>>> Small Business Server/Computer Support - www.SBITS.Biz > >>>>>> Question or Second Opinion - www.PersonalITConsultant.com > >>>>>> BPOS - Microsoft Online Services - > >>>>>> www.Microsoft-Online-Services.com > >>>>>> "Larry Struckmeyer[SBS-MVP]" <lstruckmeyer(a)mis-wizards.com> wrote > >>>>>> in > >>>>>> message > >>>>>> news:4e683515df048cc9c860e8b8e67(a)news.microsoft.com... > >>>>>>> Akram: > >>>>>>> > >>>>>>> Can you please give more details as to what you are trying to > >>>>>>> do? The link you gave is to scan from a MFC device on the LAN > >>>>>>> so that the scan will be sent to the users exchange inbox? > >>>>>>> > >>>>>>> Is that the goal, or something else having to do with Email? > >>>>>>> > >>>>>>> - > >>>>>>> Larry > >>>>>>> Please post the resolution to your > >>>>>>> issue so others may benefit > >>>>>>> - > >>>>>>> Get Your SBS Health Check at > >>>>>>> www.sbsbpa.com > >>>>>>>> i have windows SBS 2008 - exhange on it and sharepoint wss also > >>>>>>>> on it > >>>>>>>> i cannot configure incoming mail , cause all solution says > >>>>>>>> about smtp > >>>>>>>> for > >>>>>>>> the sharepoint in another server . > >>>>>>>> i found that we can do the incoming mail from this article > >>>>>>>> http://blog.mpecsinc.ca/2009/09/sbs-2008-mfpcopier-to-scan-to-e > >>>>>>>> -mail.h > >>>>>>>> tml > >>>>>>>> i did but with no success > >>>>>>>> but it's not explaining how to in more detailes > >>>>>>>> can anyone help me on this issue? > >>>>> . > >>>>> > >>> . > >>> > > > . >
From: Russ SBITS.Biz [SBS-MVP] on 8 Apr 2010 14:57 ok, did you follow all the recommendations that were mentioned in your last post? If so what is the result? Russ -- Russell Grover - SBITS.Biz [SBS-MVP] MCP, MCPS, MCNPS, SBSC Small Business Server/Computer Support - www.SBITS.Biz Question or Second Opinion - www.PersonalITConsultant.com BPOS - Microsoft Online Services - www.Microsoft-Online-Services.com http://www.twitter.com/SBITSdotBiz "akram" <akram(a)discussions.microsoft.com> wrote in message news:59E8BB65-7B6D-4823-918B-44AB4954474F(a)microsoft.com... > All Issues > Exchange Server 2007 with Service Pack 1 : > The server SALISITSESERVER is running Exchange Server 2007 with Service > Pack 1; however, Service Pack 2 for Exchange Server 2007 is available. For > more information, see "You cannot install Exchange Server 2007 Service > Pack 2 > on a Windows Small Business Server 2008-based computer" in the Microsoft > Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=163940. > > %PubFQNPre%.%PubFQNProvider% does not exist in the > BackConnectionHostNames > registry key : > The BackConnectionHostNames key should include the value > %PubFQNPre%.%PubFQNProvider%. To resolve this issue, open Registry Editor, > and then locate and click > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\BackConnectionHostNames. > Right-click BackConnectionHostNames, and then click Modify. In the Value > data > box, type %PubFQNPre%.%PubFQNProvider%, and then click OK. > > Add-On Congestion Control Provider : > Add-On Congestion Control Provider is set to ctcp. To disable Add-On > Congestion Control Provider, click Start, and in the Search box type > "command." in the results, right-click Command Prompt, and then click Run > as > administrator. At the command prompt, run the following command: netsh int > tcp set global congestion=none > > EDNS is enabled : > EDNS is enabled on this server. Some of the routers or firewalls may not > support EDNS. You should disable EDNS on this server. To do so, click > Start, > and then click Command Prompt. In the Command Prompt window, type dnscmd > /Config /EnableEdnsProbes 0 and then restart the DNS Server service. > > Firewall is disabled : > The Firewall has been disabled and by default is enabled on Windows Small > Business Server > > IE Enhanced Security disabled : > IE Enhanced Security is currently disabled for Administrators. To enable > IE > Enhanced Security go to Start/Server Manager and click on the Configure IE > ESC link on the right. > > IE Enhanced Security disabled : > IE Enhanced Security is currently disabled for Users. To enable IE > Enhanced > Security go to Start/Server Manager and click on the Configure IE ESC link > on > the right. > > Local activation permission to the IIS WAMREG Admin Service required : > The Network Service is missing local activation permissions to the IIS > WAMREG admin Service in accordance with the event ID 10016 in the system > event log. For more information, see KB "Event ID error messages 10016 and > 10017 are logged in the System log after you install Windows SharePoint > Services 3.0" at http://go.microsoft.com/fwlink/?LinkId=128063. Note: This > warning will continue to appear until at least 24 hours have passed since > the > most recent occurrence of event 10016. > > No MaxConcurrentRequestsPerCPU value : > The MaxConcurrentRequestsPerCPU value does not exist under > HLKM\SOFTWARE\Microsoft\ASP.NET\2.0.50727.0. > > OriginalMachineName registry key not correct : > The HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL > Server\90\Machines\originalmachinename registry value does not match the > current machine name of SALISITSESERVER > > Receive Window Auto-Tuning Level : > Receive Window Auto-Tuning Level is set to normal. To disable Receive > Window Auto-Tuning Level, click Start, and in the Search box type > "command." > in the results, right-click Command Prompt, and then click Run as > administrator. At the command prompt, run the following command: netsh int > tcp set global autotuning=disabled > > Receive-Side Scaling State : > Receive-Side Scaling State is set to enabled. To disable Receive-Side > Scaling, click Start, and in the Search box type "command." in the > results, > right-click Command Prompt, and then click Run as administrator. At the > command prompt, run the following command: netsh int tcp set global > rss=disabled > > Task Offload : > Task Offload is set to enabled. To disable Task Offload, click Start, and > in the Search box type "command." in the results, right-click Command > Prompt, > and then click Run as administrator. At the command prompt, run the the > following command: netsh int ip set global taskoffload=disabled > > The BackConnectionHostNames registry key does not exist : > The registry key > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\BackConnectionHostNames > does not exist. To resolve this issue, open Registry Editor, and then > locate > and click HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\. > Right-click MSV1_0, point to New, and then click Multi-String Value. Type > BackConnectionHostNames, and then press ENTER. > > The Companyweb value does not exist in the BackConnectionHostNames > registry key : > The Companyweb value does not exist in the BackConnectionHostNames > registry > key. To resolve this issue, open Registry Editor, and then locate and > click > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\BackConnectionHostNames. > Right-click BackConnectionHostNames, and then click Modify, In the Value > data > box, type Companyweb, and then click OK. > > The DNS parameter MaxCacheTTL is not set : > The DNS parameter MaxCacheTTL is not set. For more information, see > ”Windows Server 2008 DNS Servers may fail to resolve queries for some > top-level domains” in the Microsoft Knowledge Base at > http://go.microsoft.com/fwlink/?LinkId=152402. > > The IPv6 protocol is not enabled : > Open the Properties page for the network adapter, and then select > TCP/IPv6. > Windows Small Business Server 2008 is designed to function with IPv6 > enabled. > If you need to disable IPv6, you should run Fix It Wizard 50045 at > http://go.microsoft.com/fwlink/?LinkId=159700 to ensure that the server > functions correctly. > > User account does not show in the Windows SBS Console : > The user account spadmin does not have the attributes that are necessary > for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account admin does not have the attributes that are necessary for > it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Johanna Stephan does not have the attributes that are > necessary for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Timm Tiller does not have the attributes that are > necessary for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Paul Dietze does not have the attributes that are > necessary for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Marco Joerg does not have the attributes that are > necessary for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Alexandra Leeman does not have the attributes that are > necessary for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Camden DeLong does not have the attributes that are > necessary for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Tilmann Hepperle does not have the attributes that are > necessary for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Ralf Bischofs does not have the attributes that are > necessary for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Lina Huppertz does not have the attributes that are > necessary for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Daniela Spasiewski does not have the attributes that are > necessary for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Manuela Patnaik does not have the attributes that are > necessary for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Dr.Florian Amereller does not have the attributes that > are > necessary for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Dr. Stephan Jaeger does not have the attributes that are > necessary for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Dr. Kilian Baelz does not have the attributes that are > necessary for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Ingy Rasekh does not have the attributes that are > necessary for it to display in the Windows SBS Console. > > User account does not show in the Windows SBS Console : > The user account Elvira Tarara does not have the attributes that are > necessary for it to display in the Windows SBS Console. > > Windows SBS 2008 is running on a virtual machine : > Windows SBS 2008 is running on a virtual machine. > > Windows SBS Update Rollup 3 is not installed : > Update Rollup 3 for Windows Small Business Server 2008 is not installed. > For more information, see "Description of Windows Small Business Server > 2008 > Update Rollup 3" in the Microsoft Knowledge Base at > http://go.microsoft.com/fwlink/?LinkId=163941. > > > "Larry Struckmeyer[SBS-MVP]" wrote: > >> Akram: >> >> We have asked you several times for more information. Yes... thousands >> have >> incoming mail working on SBS 2008. It just works. But if yours does >> not, >> we need to know what you are trying to do and where the breakdown occurs. >> >> Please give us more details. >> >> - >> Larry >> Please post the resolution to your >> issue so others may benefit >> - >> Get Your SBS Health Check at >> www.sbsbpa.com >> >> >> > does anyone did incoming mail working on SBS2008? >> > >> > please anyone reply >> > >> > "Akram Mokhtar" wrote: >> > >> >> yes i have stopped all the exchange services >> >> and i started smtp service in the IIS and this is working with the >> >> incoming >> >> i explain more now >> >> i have document library in sharepoint site , and i have enabled it >> >> for incoming mail but when i send the mail ,it stuck in the exchange >> >> and doesn't appear in the documnet library , i stopped the exchanges >> >> services >> >> >> >> and install the smtp and start it's service and i send the email from >> >> outside like hotmail ,the library recive the mail inside it >> >> >> >> why the exchange doesn't recive the email and then the sharepoint >> >> timer service take it to the library >> >> >> >> i have done the solution b4 but the exchange in aserver and the >> >> sharepoint with smtp with it on another server and it works >> >> >> >> i want to make the exchange with sharepoing on the same server as SBS >> >> 2008 , and make the incoming mail works? >> >> >> >> look plz at this forum link ,if i allowed to put this link >> >> http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server >> >> /MS-SharePoint/Q_24911090.html >> >> >> >> "SuperGumby [SBS MVP]" wrote: >> >> >> >>> I'm sorry akram but you are just not describing the problem very >> >>> well. >> >>> >> >>> HOW have you 'email put in the library'? Just what do you mean by >> >>> this? >> >>> >> >>> If you stop Exchange there should be no SMTP to use. What do you >> >>> mean by this? Have you in some way created an additional SMTP server >> >>> in IIS? somehow associated this with your sharepoint site? >> >>> >> >>> What instructions have you been following and what steps have you >> >>> taken? >> >>> >> >>> "akram" <akram(a)discussions.microsoft.com> wrote in message >> >>> news:A0F1AA21-789A-4468-BD28-B5D77B2DFB50(a)microsoft.com... >> >>> >> >>>> my question is : i cannot make the incoming mail work with exchange >> >>>> on the server with the sharepoint >> >>>> >> >>>> when i send email to the email i put in the librabry it doesn't >> >>>> save >> >>>> inside >> >>>> the document library >> >>>> i stopped the exchange and use the smtp and it works >> >>>> so i need step by step what to do in the exchange to act like the >> >>>> smtp and >> >>>> make it work? >> >>>> any sugguestions? >> >>>> "Ace Fekay [MVP-DS, MCT]" wrote: >> >>>> >> >>>>> "Russ SBITS.Biz [SBS-MVP]" <russ(a)REMOVETHIS.sbits.biz> wrote in >> >>>>> message news:A889CD93-D95D-4C96-A19E-F64DEDA98F19(a)microsoft.com... >> >>>>> >> >>>>> The poster's original post hinted at no email coming in at all, >> >>>>> whether from the internet or otherwise. After reading it over a >> >>>>> few times, albeit I agree there isn't enough information, but I >> >>>>> *think* he's trying to get a document scanning system to email >> >>>>> scans to Sharepoint. However, the post goes on that the poster is >> >>>>> trying to configure inbound email. >> >>>>> >> >>>>> What I'm starting to think is Exchange is not receiving emails >> >>>>> from the document scanner, and Exchange simply needs to be set to >> >>>>> allow relaying from the system. Usually in this case, I create a >> >>>>> user account for this purpose and set the scanner to send emails >> >>>>> from that address, and provide credentials for the SMTP server >> >>>>> configuration in the scanner. >> >>>>> >> >>>>> However, I agree with you and Larry, that we definitely need more >> >>>>> *specific* information on what he's trying to accomplish, what was >> >>>>> done so far, and if Exchange is actually receiving outside emails, >> >>>>> and if there are any Event log errors, which may help to indicate >> >>>>> if the Transport service is rejecting any emails from the scanner, >> >>>>> that is if he's gotten that far. >> >>>>> >> >>>>> -- Ace >> >>>>> >> >>>>> This posting is provided "AS-IS" with no warranties or guarantees >> >>>>> and confers no rights. >> >>>>> >> >>>>> Please reply back to the newsgroup or forum for collaboration >> >>>>> benefit among responding engineers, and to help others benefit >> >>>>> from your resolution. >> >>>>> >> >>>>> Ace Fekay, MVP, MCT, MCITP EA, MCTS Windows 2008 & Exchange 2007, >> >>>>> MCSE & >> >>>>> MCSA 2003/2000, MCSA Messaging 2003 >> >>>>> Microsoft Certified Trainer >> >>>>> Microsoft MVP - Directory Services >> >>>>> If you feel this is an urgent issue and require immediate >> >>>>> assistance, please contact Microsoft PSS directly. Please check >> >>>>> http://support.microsoft.com for regional support phone numbers. >> >>>>> >> >>>>>> I agree with Larry, your Question and your Link to a Scanner? Is >> >>>>>> confusing >> >>>>>> >> >>>>>> If you are talking just email in General Here is some >> >>>>>> instructions >> >>>>>> http://technet.microsoft.com/en-us/library/cc794273(WS.10).aspx >> >>>>>> >> >>>>>> If it is something else please give us some more details >> >>>>>> Thanks >> >>>>>> Russ >> >>>>>> -- >> >>>>>> Russell Grover - SBITS.Biz [SBS-MVP] >> >>>>>> MCP, MCPS, MCNPS, SBSC >> >>>>>> Small Business Server/Computer Support - www.SBITS.Biz >> >>>>>> Question or Second Opinion - www.PersonalITConsultant.com >> >>>>>> BPOS - Microsoft Online Services - >> >>>>>> www.Microsoft-Online-Services.com >> >>>>>> "Larry Struckmeyer[SBS-MVP]" <lstruckmeyer(a)mis-wizards.com> wrote >> >>>>>> in >> >>>>>> message >> >>>>>> news:4e683515df048cc9c860e8b8e67(a)news.microsoft.com... >> >>>>>>> Akram: >> >>>>>>> >> >>>>>>> Can you please give more details as to what you are trying to >> >>>>>>> do? The link you gave is to scan from a MFC device on the LAN >> >>>>>>> so that the scan will be sent to the users exchange inbox? >> >>>>>>> >> >>>>>>> Is that the goal, or something else having to do with Email? >> >>>>>>> >> >>>>>>> - >> >>>>>>> Larry >> >>>>>>> Please post the resolution to your >> >>>>>>> issue so others may benefit >> >>>>>>> - >> >>>>>>> Get Your SBS Health Check at >> >>>>>>> www.sbsbpa.com >> >>>>>>>> i have windows SBS 2008 - exhange on it and sharepoint wss also >> >>>>>>>> on it >> >>>>>>>> i cannot configure incoming mail , cause all solution says >> >>>>>>>> about smtp >> >>>>>>>> for >> >>>>>>>> the sharepoint in another server . >> >>>>>>>> i found that we can do the incoming mail from this article >> >>>>>>>> http://blog.mpecsinc.ca/2009/09/sbs-2008-mfpcopier-to-scan-to-e >> >>>>>>>> -mail.h >> >>>>>>>> tml >> >>>>>>>> i did but with no success >> >>>>>>>> but it's not explaining how to in more detailes >> >>>>>>>> can anyone help me on this issue? >> >>>>> . >> >>>>> >> >>> . >> >>> >> >> >> . >>
First
|
Prev
|
Pages: 1 2 3 Prev: Will I have to pay twice for a certificate? Next: Cannot migrate SBS 2003 Premium to SBS 2008 |