From: CJT on
wrench wrote:

> [I've been taking them apart to play with the magnets--- not as strong as I
> expected in the newer drives]
>
> magnets? in a hard drive?
>
>
>
Yes. Strong ones.

--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form che...(a)prodigy.net.
From: Arno Wagner on
In comp.sys.ibm.pc.hardware.storage wrench <wrench(a)409.com> wrote:
>> Torx screws are seldom used for no other purpose then to keep the
>> prying eyes of consumers from sensitive stuff. Thats why they're
>> used in elevators.

> Not an accurate statement. Torx drive screws have been used on
> vehicles for ten years plus. They are not (in their standard form)
> an anti tamper fastener.

Definitely correct. For anti-tamper there is Torx with a pin
in the middle that needs a Torx driver with a hole. Standard
Torx is just very well suited for automated mounting and also
very well suited to use with a Torx bit in an electric drill.
Here you get a lot of "Spax" wood screws with Torx head.

Torx is optimised for maximum torque without damaging the
tool or screw and easier insertion than the standard 6-way
symmetric format. IMO ist qualifies as possibly the best
all around screw head format.

Arno



From: Folkert Rienstra on
"Doug Miller" <spambait(a)milmac.com> wrote in message news:ycNyf.9916$dW3.437(a)newssvr21.news.prodigy.com
> In article <MtMyf.156727$Ph4.4760299(a)ursa-nb00s0.nbnet.nb.ca>, "Handi" <handi_ca(a)hotmail.com> wrote:
> > I'd dare to guess that if this fellow doesn't recognize a Torx screw
> > that he isn't aware that he should never open a hard drive.
>
> I guess you can't recognize one either. :-)

The same to you.

> What he has is not a Torx screw.

Yes it is, as someone else showed from the Wiha page.
From: Arno Wagner on
In comp.sys.ibm.pc.hardware.storage wrench <wrench(a)409.com> wrote:

> [I've been taking them apart to play with the magnets--- not as strong as I
> expected in the newer drives]

> magnets? in a hard drive?

Yes, a pair of very strong ones in the moving-coil assembly that
forms the head actuator motor.

Arno


From: J. Clarke on
gypsy3001(a)yahoo.com wrote:

> I'm looking for a 5-point star shaped screwdriver. I bought a Seagate
> 80GB external hard drive. Its case uses these special screws. I shot a
> picture of a screw here:
>
http://www.gearhack.com/Forums/Tool/Screwdriver_for_5-Point_Star_Screw.files.hidden/5-point%20star.jpg
>
> Does anyone know where I can find a screwdriver for these screws?

No guarantee that it's the right size, (OD approx .057 in, about the same as
a T5 Torx) but search ebay for "5 pointed star screwdriver". Don't have a
recent Seagate drive on hand to try it on or I'd let you know if it fits.
You'll get a dozen or so hits from a guy named elvis fong who sells them
for Sony and Sharp PDAs. Price is about a buck plus 5 bucks or so shipping
from Hong Kong so call it 6 bucks or so total.

I ordered one a while back and he got it right out--seems to be a reliable
vendor.

Let him know that you're looking for a driver specifically for Seagate
drives and he might find one for you.

> Thanks.
>
> Chieh
> --
> Hacking Digital Cameras -
> http://www.camerahacker.com/books/Hacking_Digital_Cameras/

--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)
First  |  Prev  |  Next  |  Last
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Prev: Sharp 13SB50 tv
Next: JVC subwoofer problems.