From: James Sweet on
wrench wrote:
> [I've been taking them apart to play with the magnets--- not as strong as I
> expected in the newer drives]
>
> magnets? in a hard drive?
>
>
>


Hard drives have very powerful neodymium magnets in the servo actuator
for the read/write head assembly. You have to be careful not to pinch
your fingers between them but they're cool to play with.
From: James Sweet on
mm wrote:
> On 16 Jan 2006 08:17:07 -0800, "stickyfox(a)gmail.com"
> <stickyfox(a)gmail.com> wrote:
> ....
>
>>I've opened hard drives again and again in very filthy rooms and
>>they've never shown any ill effects over the days, or in some cases
>>weeks, that I operated them. I do this all the time with old drives
>>because I can see what's happening inside the drive while I test my
>>control circuitry.
>>
>>If I was manufacturing hundreds of thousands of drives and had to worry
>>about warranties and customer satisfaction, I'd be doing it in a clean
>>room. And I would buy a new drive before attempting to repair a damaged
>>one. But you definitely can operate a hard drive without the cover for
>>a while; probably long enough to do whatever you want if you don't
>>dawdle.
>
>
> My drive is clicking, and one important partition has a very bad
> directory structure. I'm not sure I can copy over even the good
> partitions before it "fails". If I open it, what would I want to do
> to stop the clicking, or to keep the clicking syndrome from preventing
> me from copying the data to a good drive.
>


There's nothing you can do by opening it. If it's clicking that means
it's unable to read the disc due to a hardware failure. I've had some
luck placing the whole drive in the freezer for a couple hours and then
copying the important stuff off immediately but if that doesn't work
either pay the $ for professional recovery or throw away the drive
because I can guarantee you won't fix it by opening it.
From: Rob B on

"James Sweet" <jamessweet(a)hotmail.com> wrote in message
news:NwYyf.15936$h47.10838(a)trnddc08...
> wrench wrote:
> > [I've been taking them apart to play with the magnets--- not as strong
as I
> > expected in the newer drives]
> >
> > magnets? in a hard drive?
> >
>
> Hard drives have very powerful neodymium magnets in the servo actuator
> for the read/write head assembly. You have to be careful not to pinch
> your fingers between them but they're cool to play with.
>

has anyone ever pinched the fingers ? i bought some of these neodynium
"warning extra strong" magnets from hardware store and skeptical i tried to
pinch my fingers and have had no luck, well if that is the label to give
such actions :)


From: mm on
On Tue, 17 Jan 2006 02:24:23 GMT, James Sweet <jamessweet(a)hotmail.com>
wrote:

>mm wrote:
>>
>> My drive is clicking, and one important partition has a very bad
>> directory structure. I'm not sure I can copy over even the good
>> partitions before it "fails". If I open it, what would I want to do
>> to stop the clicking, or to keep the clicking syndrome from preventing
>> me from copying the data to a good drive.
>>
>
>
>There's nothing you can do by opening it. If it's clicking that means
>it's unable to read the disc due to a hardware failure. I've had some
>luck placing the whole drive in the freezer for a couple hours and then
>copying the important stuff off immediately but if that doesn't work
>either pay the $ for professional recovery or throw away the drive
>because I can guarantee you won't fix it by opening it.

Well, they want 1000 dollars or more.

What about putting it in the freezer while I use it?

Would't the heat of the drive and the coldness of the freezer, or
fridge, which I could adjust if someone gave me some guidance, keep it
at a steady rather cold temp?

The flat wire is long enough, and the power wire can be any length I
want it to be.

Remove NOPSAM to email me. Please let
me know if you have posted also.
From: mm on
On Tue, 17 Jan 2006 02:38:42 GMT, "Rob B" <RobB(a)where.on.net> wrote:

>
>> Hard drives have very powerful neodymium magnets in the servo actuator
>> for the read/write head assembly. You have to be careful not to pinch
>> your fingers between them but they're cool to play with.
>>
>
>has anyone ever pinched the fingers ? i bought some of these neodynium
>"warning extra strong" magnets from hardware store and skeptical i tried to
>pinch my fingers and have had no luck, well if that is the label to give
>such actions :)

I've practically tried to glue my fingers together with super-glue,
and had no luck there either. :)

Remove NOPSAM to email me. Please let
me know if you have posted also.
First  |  Prev  |  Next  |  Last
Pages: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Prev: Sharp 13SB50 tv
Next: JVC subwoofer problems.