usb3.0 PHY wrapper for Xilinx V5/V6 device [FPGA]

Prev: IMPACT: Verification fails with inidirect SPI programming
Next: OpenSPARC T1 or T2 on Altera EP2S60 or EP2S90

From: murlary on 1 Sep 2009 21:18

On 9ÔÂ1ÈÕ, ÏÂÎç1Ê±25·Ö, "Antti.Luk...(a)googlemail.com"
<antti.luk...(a)googlemail.com> wrote:
> On Sep 1, 6:56 am, "murl...(a)gmail.com" <water9...(a)yahoo.com> wrote:
>
>
>
>
>
> > On 8ÔÂ31ÈÕ, ÏÂÎç3Ê±22·Ö, "Antti.Luk...(a)googlemail.com"
>
> > <antti.luk...(a)googlemail.com> wrote:
> > > On Aug 31, 3:55 am, "murl...(a)gmail.com" <water9...(a)yahoo.com> wrote:
>
> > > > On 8ÔÂ30ÈÕ, ÏÂÎç2Ê±02·Ö, "Antti.Luk...(a)googlemail.com"
>
> > > > <antti.luk...(a)googlemail.com> wrote:
> > > > > On Aug 30, 8:32 am, "murl...(a)gmail.com" <water9...(a)yahoo.com> wrote:
>
> > > > > > On 8ÔÂ28ÈÕ, ÏÂÎç6Ê±27·Ö, "Antti.Luk...(a)googlemail.com"
>
> > > > > > <antti.luk...(a)googlemail.com> wrote:
> > > > > > > On Aug 28, 11:01 am, water <water9...(a)yahoo.com> wrote:
>
> > > > > > > > who have the available wrapper?
>
> > > > > > > wau do you think its only the wrapper you need?
> > > > > > > ask PLDA what their USB 3.0 IP cores costs
> > > > > > > then think how likely is to get a free IP
>
> > > > > > > Antti
> > > > > > > asics.ws also has usb 3.0 solutions i think
>
> > > > > > i only need this wrapper.
>
> > > > > 1) contact PLDA
> > > > > 2) contact asics.ws
> > > > > 3) write yourself
>
> > > > > Antti
> > > > > PS look at your rating:
> > > > > you have been rated 20 times, and the rating score is 1 out 5,
> > > > > means that.. [insert here....]
>
> > > > > there is no need for wrapper if you dont have the USB 3.0 IP
> > > > > but if you have the IP, you would also have the wrapper..
>
> > > > I have designed usb3.0 host controller sucessfully. but i need verify
> > > > it at V5/V6 device.I need the usb3.0 PHY wrapper for V5/V6 device.- Hide quoted text -
>
> > > > - Show quoted text -
>
> > > try using 1GbE setting for MGT wrapper, if you test with your own test
> > > IP it should work already
>
> > > Antti- Òþ²Ø±»ÒýÓÃÎÄ×Ö -
>
> > > - ÏÔÊ¾ÒýÓÃµÄÎÄ×Ö -
>
> > it doesn't work with PCIE GEN2 template.
>
> > Can it work with 1GbE template? why?
>
> writing a IP core is 10% of the work
> sim testbench, verification ,FPGA testing,
> test software, compliance testing, documentation
>
> make up the 90%
>
> are you asking i do that 90% for you?
> for 50% share of your potential profits, I might..:)
> or if you plan to open-source it, i also would help you
> but if you want to cash-in i will not do your work
>
> hm.. but u are welcome to contact me in private, still
>
> Antti- Òþ²Ø±»ÒýÓÃÎÄ×Ö -
>
> - ÏÔÊ¾ÒýÓÃµÄÎÄ×Ö -

it is very easy for me write the wrapper.

i only want to know if the 1GbE template works for usb3.0 pipe PHY.

From: murlary on 1 Sep 2009 21:21

From: Antti.Lukats on 2 Sep 2009 02:20

On Sep 2, 4:21 am, "murl...(a)gmail.com" <water9...(a)yahoo.com> wrote:
> On 9ÔÂ1ÈÕ, ÏÂÎç1Ê±25·Ö, "Antti.Luk...(a)googlemail.com"
>
>
>
> <antti.luk...(a)googlemail.com> wrote:
> > On Sep 1, 6:56 am, "murl...(a)gmail.com" <water9...(a)yahoo.com> wrote:
>
> > > On 8ÔÂ31ÈÕ, ÏÂÎç3Ê±22·Ö, "Antti.Luk...(a)googlemail.com"
>
> > > <antti.luk...(a)googlemail.com> wrote:
> > > > On Aug 31, 3:55 am, "murl...(a)gmail.com" <water9...(a)yahoo.com> wrote:
>
> > > > > On 8ÔÂ30ÈÕ, ÏÂÎç2Ê±02·Ö, "Antti.Luk...(a)googlemail.com"
>
> > > > > <antti.luk...(a)googlemail.com> wrote:
> > > > > > On Aug 30, 8:32 am, "murl...(a)gmail.com" <water9...(a)yahoo.com> wrote:
>
> > > > > > > On 8ÔÂ28ÈÕ, ÏÂÎç6Ê±27·Ö, "Antti.Luk....(a)googlemail.com"
>
> > > > > > > <antti.luk...(a)googlemail.com> wrote:
> > > > > > > > On Aug 28, 11:01 am, water <water9...(a)yahoo.com> wrote:
>
> > > > > > > > > who have the available wrapper?
>
> > > > > > > > wau do you think its only the wrapper you need?
> > > > > > > > ask PLDA what their USB 3.0 IP cores costs
> > > > > > > > then think how likely is to get a free IP
>
> > > > > > > > Antti
> > > > > > > > asics.ws also has usb 3.0 solutions i think
>
> > > > > > > i only need this wrapper.
>
> > > > > > 1) contact PLDA
> > > > > > 2) contact asics.ws
> > > > > > 3) write yourself
>
> > > > > > Antti
> > > > > > PS look at your rating:
> > > > > > you have been rated 20 times, and the rating score is 1 out 5,
> > > > > > means that.. [insert here....]
>
> > > > > > there is no need for wrapper if you dont have the USB 3.0 IP
> > > > > > but if you have the IP, you would also have the wrapper..
>
> > > > > I have designed usb3.0 host controller sucessfully. but i need verify
> > > > > it at V5/V6 device.I need the usb3.0 PHY wrapper for V5/V6 device..- Hide quoted text -
>
> > > > > - Show quoted text -
>
> > > > try using 1GbE setting for MGT wrapper, if you test with your own test
> > > > IP it should work already
>
> > > > Antti- Òþ²Ø±»ÒýÓÃÎÄ×Ö -
>
> > > > - ÏÔÊ¾ÒýÓÃµÄÎÄ×Ö -
>
> > > it doesn't work with PCIE GEN2 template.
>
> > > Can it work with 1GbE template? why?
>
> > writing a IP core is 10% of the work
> > sim testbench, verification ,FPGA testing,
> > test software, compliance testing, documentation
>
> > make up the 90%
>
> > are you asking i do that 90% for you?
> > for 50% share of your potential profits, I might..:)
> > or if you plan to open-source it, i also would help you
> > but if you want to cash-in i will not do your work
>
> > hm.. but u are welcome to contact me in private, still
>
> > Antti- Òþ²Ø±»ÒýÓÃÎÄ×Ö -
>
> > - ÏÔÊ¾ÒýÓÃµÄÎÄ×Ö -
>
> it is very easy for me write the wrapper.
>
> i only want to know if the 1GbE template works for usb3.0 pipe PHY.

if it very easy why dont you do it?

Antti

From: kclo4 on 2 Sep 2009 14:35

On Sep 2, 8:20 am, "Antti.Luk...(a)googlemail.com"
<antti.luk...(a)googlemail.com> wrote:
> On Sep 2, 4:21 am, "murl...(a)gmail.com" <water9...(a)yahoo.com> wrote:
>
>
>
> > On 9ÔÂ1ÈÕ, ÏÂÎç1Ê±25·Ö, "Antti.Luk...(a)googlemail.com"
>
> > <antti.luk...(a)googlemail.com> wrote:
> > > On Sep 1, 6:56 am, "murl...(a)gmail.com" <water9...(a)yahoo.com> wrote:
>
> > > > On 8ÔÂ31ÈÕ, ÏÂÎç3Ê±22·Ö, "Antti.Luk...(a)googlemail.com"
>
> > > > <antti.luk...(a)googlemail.com> wrote:
> > > > > On Aug 31, 3:55 am, "murl...(a)gmail.com" <water9...(a)yahoo.com> wrote:
>
> > > > > > On 8ÔÂ30ÈÕ, ÏÂÎç2Ê±02·Ö, "Antti.Luk...(a)googlemail.com"
>
> > > > > > <antti.luk...(a)googlemail.com> wrote:
> > > > > > > On Aug 30, 8:32 am, "murl...(a)gmail.com" <water9...(a)yahoo.com> wrote:
>
> > > > > > > > On 8ÔÂ28ÈÕ, ÏÂÎç6Ê±27·Ö, "Antti.Luk....(a)googlemail.com"
>
> > > > > > > > <antti.luk...(a)googlemail.com> wrote:
> > > > > > > > > On Aug 28, 11:01 am, water <water9...(a)yahoo.com> wrote:
>
> > > > > > > > > > who have the available wrapper?
>
> > > > > > > > > wau do you think its only the wrapper you need?
> > > > > > > > > ask PLDA what their USB 3.0 IP cores costs
> > > > > > > > > then think how likely is to get a free IP
>
> > > > > > > > > Antti
> > > > > > > > > asics.ws also has usb 3.0 solutions i think
>
> > > > > > > > i only need this wrapper.
>
> > > > > > > 1) contact PLDA
> > > > > > > 2) contact asics.ws
> > > > > > > 3) write yourself
>
> > > > > > > Antti
> > > > > > > PS look at your rating:
> > > > > > > you have been rated 20 times, and the rating score is 1 out 5,
> > > > > > > means that.. [insert here....]
>
> > > > > > > there is no need for wrapper if you dont have the USB 3.0 IP
> > > > > > > but if you have the IP, you would also have the wrapper..
>
> > > > > > I have designed usb3.0 host controller sucessfully. but i need verify
> > > > > > it at V5/V6 device.I need the usb3.0 PHY wrapper for V5/V6 device.- Hide quoted text -
>
> > > > > > - Show quoted text -
>
> > > > > try using 1GbE setting for MGT wrapper, if you test with your own test
> > > > > IP it should work already
>
> > > > > Antti- Òþ²Ø±»ÒýÓÃÎÄ×Ö -
>
> > > > > - ÏÔÊ¾ÒýÓÃµÄÎÄ×Ö -
>
> > > > it doesn't work with PCIE GEN2 template.
>
> > > > Can it work with 1GbE template? why?
>
> > > writing a IP core is 10% of the work
> > > sim testbench, verification ,FPGA testing,
> > > test software, compliance testing, documentation
>
> > > make up the 90%
>
> > > are you asking i do that 90% for you?
> > > for 50% share of your potential profits, I might..:)
> > > or if you plan to open-source it, i also would help you
> > > but if you want to cash-in i will not do your work
>
> > > hm.. but u are welcome to contact me in private, still
>
> > > Antti- Òþ²Ø±»ÒýÓÃÎÄ×Ö -
>
> > > - ÏÔÊ¾ÒýÓÃµÄÎÄ×Ö -
>
> > it is very easy for me write the wrapper.
>
> > i only want to know if the 1GbE template works for usb3.0 pipe PHY.
>
> if it very easy why dont you do it?
>
> Antti

because it is too easy to do it, so he prefer to help some lower level
engineer to train himself by doing something for free for him...

From: Antti.Lukats on 2 Sep 2009 15:05

On Sep 2, 9:35 pm, kclo4 <alexis.ga...(a)gmail.com> wrote:
> On Sep 2, 8:20 am, "Antti.Luk...(a)googlemail.com"
>
>
>
> <antti.luk...(a)googlemail.com> wrote:
> > On Sep 2, 4:21 am, "murl...(a)gmail.com" <water9...(a)yahoo.com> wrote:
>
> > > On 9ÔÂ1ÈÕ, ÏÂÎç1Ê±25·Ö, "Antti.Luk...(a)googlemail.com"
>
> > > <antti.luk...(a)googlemail.com> wrote:
> > > > On Sep 1, 6:56 am, "murl...(a)gmail.com" <water9...(a)yahoo.com> wrote:
>
> > > > > On 8ÔÂ31ÈÕ, ÏÂÎç3Ê±22·Ö, "Antti.Luk...(a)googlemail.com"
>
> > > > > <antti.luk...(a)googlemail.com> wrote:
> > > > > > On Aug 31, 3:55 am, "murl...(a)gmail.com" <water9...(a)yahoo.com> wrote:
>
> > > > > > > On 8ÔÂ30ÈÕ, ÏÂÎç2Ê±02·Ö, "Antti.Luk....(a)googlemail.com"
>
> > > > > > > <antti.luk...(a)googlemail.com> wrote:
> > > > > > > > On Aug 30, 8:32 am, "murl...(a)gmail.com" <water9...(a)yahoo.com> wrote:
>
> > > > > > > > > On 8ÔÂ28ÈÕ, ÏÂÎç6Ê±27·Ö, "Antti.Luk...(a)googlemail.com"
>
> > > > > > > > > <antti.luk...(a)googlemail.com> wrote:
> > > > > > > > > > On Aug 28, 11:01 am, water <water9...(a)yahoo.com> wrote:
>
> > > > > > > > > > > who have the available wrapper?
>
> > > > > > > > > > wau do you think its only the wrapper you need?
> > > > > > > > > > ask PLDA what their USB 3.0 IP cores costs
> > > > > > > > > > then think how likely is to get a free IP
>
> > > > > > > > > > Antti
> > > > > > > > > > asics.ws also has usb 3.0 solutions i think
>
> > > > > > > > > i only need this wrapper.
>
> > > > > > > > 1) contact PLDA
> > > > > > > > 2) contact asics.ws
> > > > > > > > 3) write yourself
>
> > > > > > > > Antti
> > > > > > > > PS look at your rating:
> > > > > > > > you have been rated 20 times, and the rating score is 1 out 5,
> > > > > > > > means that.. [insert here....]
>
> > > > > > > > there is no need for wrapper if you dont have the USB 3.0 IP
> > > > > > > > but if you have the IP, you would also have the wrapper..
>
> > > > > > > I have designed usb3.0 host controller sucessfully. but i need verify
> > > > > > > it at V5/V6 device.I need the usb3.0 PHY wrapper for V5/V6 device.- Hide quoted text -
>
> > > > > > > - Show quoted text -
>
> > > > > > try using 1GbE setting for MGT wrapper, if you test with your own test
> > > > > > IP it should work already
>
> > > > > > Antti- Òþ²Ø±»ÒýÓÃÎÄ×Ö -
>
> > > > > > - ÏÔÊ¾ÒýÓÃµÄÎÄ×Ö -
>
> > > > > it doesn't work with PCIE GEN2 template.
>
> > > > > Can it work with 1GbE template? why?
>
> > > > writing a IP core is 10% of the work
> > > > sim testbench, verification ,FPGA testing,
> > > > test software, compliance testing, documentation
>
> > > > make up the 90%
>
> > > > are you asking i do that 90% for you?
> > > > for 50% share of your potential profits, I might..:)
> > > > or if you plan to open-source it, i also would help you
> > > > but if you want to cash-in i will not do your work
>
> > > > hm.. but u are welcome to contact me in private, still
>
> > > > Antti- Òþ²Ø±»ÒýÓÃÎÄ×Ö -
>
> > > > - ÏÔÊ¾ÒýÓÃµÄÎÄ×Ö -
>
> > > it is very easy for me write the wrapper.
>
> > > i only want to know if the 1GbE template works for usb3.0 pipe PHY.
>
> > if it very easy why dont you do it?
>
> > Antti
>
> because it is too easy to do it, so he prefer to help some lower level
> engineer to train himself by doing something for free for him...

not all things that look easy are
...well at least until you have done them
and even then when done (easily) the way to them may not be as easy

(and this is true in the case of the wrapper in question too..:)

Antti

| Next | Last
Pages: 1 2
Prev: IMPACT: Verification fails with inidirect SPI programming
Next: OpenSPARC T1 or T2 on Altera EP2S60 or EP2S90