Cisco
in [Network]
|
Certificate/Signature Authentication Error on ASA5500 and VPN client Hi, I got error message when I enabled Local Certificate Authority on ASA5500 and have client connect vpn using certificate. I don't know is there somebody encontered the same issue on ASA5500 local certificate authority services, what I have to check base on the error messages on ASA5500 and client end. Any inpu... 17 Jan 2008 16:02
Cisco 1841 and SDSL WIC Card Hi I have a CISCO 1841 router with a ADSL WIC in it. I decided to add a CISCO SDSL WIC in it. But I am unable to configure it from the IOS software as I cannot see it Can any one point me in the right direction here are the output from sh ver and sh diag Clearly the diag can see it, but when I do sho... 20 Jan 2008 17:35
VLAN bridging over GRE tunneling Hi! Is it possible to use a GRE tunnel to connect 2 switches in diferent locations with the same vlan? basically, the scenario is a 2 locations; both with a switch and the same vlan. I need one computer from the first location to access the a vlan on the second location. I was thinking on dot1q tunneling ... 16 Jan 2008 11:57
Cannot apply ACL to fa0/5 Hi all: I have a Cisco 2950 and I'm trying to apply a simple ACL to block pings from outside to our internal network. Here is the info on the switch: Cisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(19)EA1c, RELEASE SOFTWARE (fc2) Copyright (c) 1986-2004 b... 9 Jan 2008 16:52
Cisco 1760 router and VPN client Connection Issues suggest you use a different address range for VPN pool try using 172.16.1.x-y ... 8 Jan 2008 19:06
VPN ASA 5520 problem. Hello, has anyone worked with ASA 5500 Series device ? I have some problem. I have configured L2TP over IPSec, but i have this errors: Dec 21 14:00:48 [IKEv1]: IP = XX.XX.XX.XX, Removing peer from peer table failed, no match! Dec 21 14:00:48 [IKEv1]: IP = XX.XX.XX.XX, Error: Unable to remove PeerTblEntry M... 22 Dec 2007 12:28
IP Route Tables - Point to Point Connection - Only Routing 1 way Hi there, I have a point to point connection but have come accross an issue. Site 1 - This is the main office and this has the following setup router internal 10.1.15.230 ( Wan Link 10.2.254.1 ) Site 2 - Branch Office router internal 10.2.0.1 ( Wan Link 10.2.254.2 ) Now This is where I am conf... 9 Dec 2007 23:58
6509 High Cpu Utilization Hi. We are having a problem with a 6509 and high cpu utilization. The 6509 is running CAT OS, and running cat6000-sup2k8.8-2-2. The issue is that the Switch will stop all telnet traffic to it as well as kill to console connection. This lasts roughly 10 mins, once we gain access to the switch again we see the foll... 9 Dec 2007 23:58
PIX 501: DHCP on outside interface will not renew Greetings. I am trying to set up a PIX 501 for use in a SOHO environment, with cable Internet access and a dynamic IP address. I want to open up a port for public access so I am trying to test the PIX's ability to handle a change in my public IP address from my ISP. I cannot get my actual ISP-assigned public IP ... 9 Dec 2007 23:58
High CPU util on 3825 Hi, We have been seeing very high CPU util values which reaches the top (result of "sh processes cpu history " copied below). which were reaching only to 40-50% a few months ago. This is a router which has an ATM port with a connection of 16Mbps towards internet, and inside the ethernet port is connected to ou... 9 Dec 2007 23:58 |