Cisco
in [Network]
|
Serial ports up, but multilink down I have three serial ports, each a T1 link, that are showing up/up. I've bundled the three into a single multilink interface. The multilink is showing down/down. Debugging ppp authentication doens't show any problems. "show ppp multilink" shows no active bundles, and all three serial links are listed as inactive,... 8 Oct 2008 08:49
VPN Not Routing, Reboot Fixes it. So i have 2 PIXs that connect via the internet and when I first boot them, they connect up via IPSec Preshared Keys LAN-to-LAN and all is good in the world. HQ 10.1.x.x <- Internet -> SF 10.2.x.x <- rotuer-> 10.6.x.x Some number of hours later, It stops passing traffic from 10.6.x.x to 10.1.x.x. 10.2.x.x to ... 21 Jul 2008 03:49
Error unsupported TCAM value size Does anyone know what could cause the error below. It's on a WS-C3750G-24TS-E with flash:c3750-ipservicesk9-mz.122-25.SEE/c3750-ipservicesk9-mz.122-25.SEE.bin !!! WARNING: The switch is not usable !!! Reason: Error unsupported TCAM value size Actual value = 1, Expected value = 40 ... 7 Aug 2008 10:22
Policy Based Routing and/or NAT Hi, I'm trying to replace this Linux GW with a Cisco 877 however I'm having a bit of an hard time implementing Policy Based Routing together in NAT depending on the policy. I'll explain: This was the previsous setup: | | | Linux GW | ---> Network 1 ADSLoISDN | cisco 83... 7 May 2008 12:35
Logging issue in CiscoSecure ACS 4.2 You can't prevent this from happening when you replicate the log FILES, but you can when you configure the primary also log to the secondary. "Daniel Alex" <xiance78(a)vostroen.e4ward.com> wrote in message news:fvpba6$2tj$1(a)aioe.org... Hi, I still need the log replication. However, I want to know how to p... 6 May 2008 23:25
automating username/password when ssh to cisco router Trying to ssh from a Sun Solaris box to a Cisco router and want to use a script to log in automatically without it prompting for a username and password. Looks like you can use ssh -l <username> to specify a username but there doesnt appear to be a way to send the password, so it still prompts for this. I und... 22 Apr 2008 19:36
nat problem Hello ! I want to do address translation on a cisco 1600. (IOS (tm) 1600 Software (C1600-Y-M), Version 12.0(9)) ip packet from 192.168.254 and having 172.20.2 destination must be first source translated in 10.20.210.240 host, and then rerouted to another router. All work fine but a single thing : the tran... 22 Apr 2008 10:41
PIX 515E remote access vpn with DHCP pushed to the client On Mar 24, 4:28 pm, Merv <merv.hr...(a)rogers.com> wrote: Please clarify what you mean by "DHCP parameters pushed to the VPN Client '" - do you assign IP address via DHCP server ? - do you mean pass info like DNS servers, WINS server, etc Hi Merv, sorry I should've been a bit clearer. No matter what ... 9 Apr 2008 13:49
CSS MIBS Can't find CSS MIBS. Can't find a tarball of the OS, only adis, and can't find the mib directories supposedly on the css per this doc http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v7.40/configuration/administration/guide/snmp.html#wp1015666 We recommend that you updat... 25 Jan 2008 13:21
Change Routing Protocol DSCP from CS6 to AF41... ....for example. I have a situation where I need to be able to change DSCP values from CS6 (DSCP 48) to AF41 (DSCP 34). What's the best way to do this? ... 22 Jan 2008 14:35 |