Cisco
in [Network]
|
Aironet 1200 sntp sync problem Hi experts, my 1200 AP doesn't want to sync to the sntp timeserver. What can be the problem ? This is a part of the config: ! sntp logging sntp server 194.109.22.18 end and: aironet1200#sh sntp SNTP server Stratum Version Last Receive 194.109.22.18 16 1 never aironet1200#sh ... 6 Nov 2006 00:52
Cisco 877(W) on a BT A-DSL line Hello, my attempt to migrate a BT A-DSL line (using the Max service) from a Linksys ADSL2MUE to a Cisco 877W today were not every succesful. The configuration of the Cisco worked in general: - The A-DSL link was established at the expected speed. - The PPP session was established and the Cisco got the correct ... 6 Nov 2006 16:11
AP 1200 Hi guys, I have an Aironet 1200 that keeps reloading, I have tried the escape button to go to the rommon, and tried as well to recover the image through the Mode button, both are not working. I can not access both the CLI and the web page due to the frequent reload. I might have done something wrong with the image... 28 Oct 2006 22:38
The remote peer is no longer responding I am using VPN client to connect to a PIX firewall. I get the error: " Secure VPN connection terminated locally by the Client. Reason 412: The remote peer is no longer responding". I am attaching the log below. Someone (Walter?) please help me. Thanks & Regards Cisco Systems VPN Client Version 4.0.5 (Rel) Cop... 24 Oct 2006 10:09
excessive collisions Hi, I have a cisco 2600 series router that has been functioning quite normally for a couple of years. Within the last 2-3 weeks, I've been getting %AMDP2_FE-5-EXCESSCOLL: Ethernet0/0 TDR=1, TRC=0 errors sent to my syslog. My sho int ethernet0/0 is as follows: Ethernet0/0 is up, line protocol is up Hardwar... 26 Oct 2006 14:11
PIX vlan and DMZ Hello, Please bear with me, I'm helping with an office transition from one company to another. In the process the old company wiped the configuration of the PIX 506. I'm trying to get everything up and running again. We have a Cisco 2950 switch with 2 vlans (10 and 20). Port 24 is the trunk port, set as 802... 11 Oct 2006 14:50
Cisco Switch VLAN issue tb-vlanX My 2 external switches , the ones that connect the inside, dmz and outside, have vlans configured, in one of them I saw this configuration and I hope some one can tell me about, because I don't uderstand tb-vlanX function because I never used it before vlan 1 tb-vlan1 1002 tb-vlan2 1003 ! vlan 10... 3 Oct 2006 17:59
2950 Error Hi guys, i am having a connectivity problem with a 2950 switch, and it is showing the error below. i did an upgrade to an image that if working fine on other 2950s, and still having the same problem, after the upgrade the disconnectivity is getting more frequent, SCHAN ERROR INTR: unit=0 SRC=6 DST=5 ... 27 Sep 2006 10:56
CDP-4-NATIVE_VLAN_MISMATCH Hi, our network chap has come in and configured our switches and has since left. When logged into the switches to dump the config from the two 3560 switches in the server room I was getting the following error on the console for both switches. CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on Gigabi... 19 Sep 2006 05:51
Cisco 7911 IP Phone with CCME 4 problem I have an IPT network consisting of 2811 with CCME 4 - IOS ver. 12.4(9)T and 7961 and 7911 phones. Making or receiving calls internally between phones works and sounds good, but I have problems with calls established using dial-peers. These calls are noisy so much that you barely hear a person at the other end... 10 Sep 2006 17:43 |