RCA 36V430T Chassis ITC008HYN turns on and off repeatedly. howdy, I have this monster RCA that is possessed. It will turn on and then at random intervals will shut down and power back up. I have touched up any solder connections that looked cold. I removed all of the tact switches from the front panel control, problem still exists. I disconnected the front panel after th... 5 Nov 2009 11:08
RCA 36V430T Chassis ITC008HYN turns on and off repeatedly. howdy, I have this monster RCA that is possessed. It will turn on and then at random intervals will shut down and power back up. I have touched up any solder connections that looked cold. I removed all of the tact switches from the front panel control, problem still exists. I disconnected the front panel after th... 5 Nov 2009 11:08
Carlsbro S600M, 1981 600W slave amp If anyone should have any info on the triac ? mains power protection, or maybe similar Carlsbro amp , th/sw on heatsink plus other stuff monitored presumably. Its in an awkward area to get to, a lot crammed in a small box. Anyone happen to no basic data on Carlsro badged TO3 audio o/p devices ERD1159 ? (if on the... 5 Nov 2009 21:14
Washing M/C will not Spin My Japanese washing machine can not spin but will wash alright. the solenoid pulls alright but the tub will just not spin the agitator moves in spin mode. ... 6 Nov 2009 01:37
Weird RF noise bridge problem (or maybe operator error) I have an old MFJ-202B RF noise bridge I picked up used a while back. I've been attempting to use it with my 10m transceiver, but I can't seem to get any useful results. No matter what I connect to the UNKNOWN jack, the noise in the receiver is lowest with the RESISTANCE knob turned to the 0 ohms position. It... 25 Nov 2009 05:58
Sony Blu-Ray player drive replacement I have a Sony DBP-S301 Blu-Ray player with a bad drive. It's basically a standard IDE Blu-Ray drive. I would like to replace the drive with a PC BD drive, but it refuses to play any discs, even though it can at least read them (with the original drive it says "no disc". Is this a case of the drive being marr... 1 Nov 2009 17:41
Panasonic VCR (NV-FJ620), heads dirty/plays fast? Hi All, Have a problem, hopefully someone might know what is going on. Was playing a tape the other day on our Panasonic NV-FJ620 and all of a sudden the picture split into 3/4 segments and went grey etc. Anyway, I opened it up and cleaned the heads with iso. alcohol (eject, audio and video heads) - video ones... 7 Nov 2009 06:02
Samsung model HL84676S The customer phoned for a service call on this set. He says that he has what he describes as little specks on the screen. He says its like looking at the stars at night if this makes any sense. I'm trying to determine if this is repairable in the home or if I should have him bring it in. Does anyone have any id... 6 Nov 2009 21:28
Sanyo model #DP42647 no video This is my first flat panel LCD to work on, and need a little help. I am not a pro, but have been working on tube TV's for a few years now. This set has no video or on screen display. Audio is fine. The screen also pulses at power up for a few seconds then stops, only to leave a blank dark blue screen. I have googl... 30 Oct 2009 14:27
FS: NEW Minicircuits ZKL-1R5 RF MICROWAVE AMPLIFIER(s) 0.01-1.5GHz. $50 on Ebay (LOT of TEN) Mark Levitski wrote: Minicircuits ZKL-1R5 RF MICROWAVE AMPLIFIER(s) 0.01-1.5GHz. High-end Amps, MedPower +18.7dBm, Low Noise 3dB, 40dB gain. NEW - in original Minicircuits/antistatic packaging (never used). Minicircuits has put out a warning about a lot of counterfeit parts marked with their l... 28 Oct 2009 08:27 |