Two Lenny problems
in [Debian]
|
From: Stephen Powell on 22 Feb 2010 15:40 (Problem: snd_ca0106 sound driver does not work) Another thing you might try is firmware. Is the package alsa-firmware-loaders installed? According to the packages page http://packages.debian.org/lenny/alsa-firmware-loaders it should only be needed for the SoundBlaster 16 ASP/CSP Control Program. But maybe it is used for other SoundBlaster cards too. Generally, once a hardware vendor starts down the firmware path, they tend to stay on it. Make sure that "non-free" and "contrib" are listed in your /etc/apt/sources.list file or you won't be able to install it. -- To UNSUBSCRIBE, email to debian-user-REQUEST(a)lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster(a)lists.debian.org Archive: http://lists.debian.org/1638797480.14265671266870757606.JavaMail.root(a)md01.wow.synacor.com
From: Cecil Knutson on 22 Feb 2010 21:50 Yes, Lisi, I did see the later post telling me to use Kwrite as root. I don't see it on the applications menu, so I guess I will have to install it. How do I use it as root? -- To UNSUBSCRIBE, email to debian-user-REQUEST(a)lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster(a)lists.debian.org Archive: http://lists.debian.org/op.u8j7eho9do2va7(a)dimension8400
From: Lisi on 23 Feb 2010 03:50 On Tuesday 23 February 2010 02:48:07 Cecil Knutson wrote: > Yes, Lisi, I did see the later post telling me to use Kwrite as root. I > don't see it on the applications menu, so I guess I will have to install > it. How do I use it as root? From my earlier email (slightly edited, to allow for the fact that I now know that you use some KDE applications but are running Gnome): <quote> Do Alt+F2. Type "gksu kwrite" (without the quotation marks) in the small window that opens. When asked for password, enter the root password. When Kwrite opens, load file as you would in a wordprocessor. Save As to a new name. (e.g. conf.file.old) Reload file under original name. Edit. Save. Close Kwrite. </quote> But gedit is a also a graphical editor, so if you have that (and you probably have since you are running Gnome), you could see how you get on with it - tho' you would still need to run it as root. Lisi -- To UNSUBSCRIBE, email to debian-user-REQUEST(a)lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster(a)lists.debian.org Archive: http://lists.debian.org/201002230842.24359.lisi.reisz(a)gmail.com
From: Cecil Knutson on 24 Feb 2010 00:40 Stephen, This is the second time I have replied, but I don't see the reply on the list, so here it goes again. "Local" is in the /etc/modprobe.d directory; it has the right contents; modprobe.conf does not exist; the "cat" command does show the contents of the file, but I don't see anything that shows if it is plain text or not.. Here is a section out of the output of "lsmod" pertaining to loaded sound modules: snd_ca0106 27584 3 snd_ac97_codec 88452 1 snd_ca0106 snd_pcm_oss 32800 0 snd_mixer_oss 12320 1 snd_pcm_oss snd_pcm 62660 4 snd_ca0106,snd_ac97_codec,snd_pcm_oss snd_seq_dummy 2660 0 snd_seq_oss 24992 0 snd_seq_midi 5728 0 snd_rawmidi 18496 2 snd_ca0106,snd_seq_midi snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event I didn't see anything about snd_intel8x0 anywhere in the output. Here is the output of dmesg: [ 0.000000] ACPI: BOOT 000FCDDE, 0028 (r1 DELL 8400 7 ASL 61) [ 0.000000] ACPI: MCFG 000FCE06, 003E (r1 DELL 8400 7 ASL 61) [ 0.000000] ACPI: HPET 000FCE44, 0038 (r1 DELL 8400 7 ASL 61) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844942 [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2992.587 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 3368252k/3406384k available (1770k kernel code, 36968k reserved, 751k data, 244k init, 2488880k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02ba9a9 - 0xc0376620 ( 751 kB) [ 0.004000] .text : 0xc0100000 - 0xc02ba9a9 (1770 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered [ 0.083948] Calibrating delay using timer specific routine.. 5991.27 BogoMIPS (lpj=11982554) [ 0.083990] Security Framework initialized [ 0.083995] SELinux: Disabled at boot. [ 0.083999] Capability LSM initialized [ 0.084005] Mount-cache hash table entries: 512 [ 0.084005] Initializing cgroup subsys ns [ 0.084005] Initializing cgroup subsys cpuacct [ 0.084005] Initializing cgroup subsys devices [ 0.084005] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.084005] CPU: L2 cache: 1024K [ 0.084005] CPU: Physical Processor ID: 0 [ 0.084005] Intel machine check architecture supported. [ 0.084005] Intel machine check reporting enabled on CPU#0. [ 0.084005] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available [ 0.084005] CPU0: Thermal monitoring enabled [ 0.084005] using mwait in idle threads. [ 0.084005] Checking 'hlt' instruction... OK. [ 0.100006] ACPI: Core revision 20080321 [ 0.144009] ENABLING IO-APIC IRQs [ 0.144009] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.183714] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 [ 0.184011] Booting processor 1/1 ip 6000 [ 0.192012] Initializing CPU#1 [ 0.192012] Calibrating delay using timer specific routine.. 5985.00 BogoMIPS (lpj=11970019) [ 0.192012] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.192012] CPU: L2 cache: 1024K [ 0.192012] CPU: Physical Processor ID: 0 [ 0.192012] Intel machine check architecture supported. [ 0.192012] Intel machine check reporting enabled on CPU#1. [ 0.192012] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available [ 0.192012] CPU1: Thermal monitoring enabled [ 0.272017] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 [ 0.272017] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.276017] Brought up 2 CPUs [ 0.276017] Total of 2 processors activated (11976.28 BogoMIPS). [ 0.276017] CPU0 attaching sched-domain: [ 0.276017] domain 0: span 0-1 [ 0.276017] groups: 0 1 [ 0.276017] domain 1: span 0-1 [ 0.276017] groups: 0-1 [ 0.276017] CPU1 attaching sched-domain: [ 0.276017] domain 0: span 0-1 [ 0.276017] groups: 1 0 [ 0.276017] domain 1: span 0-1 [ 0.276017] groups: 0-1 [ 0.276017] net_namespace: 660 bytes [ 0.276017] Booting paravirtualized kernel on bare hardware [ 0.276017] NET: Registered protocol family 16 [ 0.276017] ACPI: bus type pci registered [ 0.276017] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.276017] PCI: MCFG area at e0000000 reserved in E820 [ 0.276017] PCI: Using MMCONFIG for extended config space [ 0.276017] PCI: Using configuration type 1 for base access [ 0.276017] Setting up standard PCI resources [ 0.192012] ACPI: EC: Look up EC in DSDT [ 0.300380] ACPI: Interpreter enabled [ 0.300384] ACPI: (supports S0 S1 S3 S4 S5) [ 0.300407] ACPI: Using IOAPIC for interrupt routing [ 0.336977] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.337342] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.337348] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO [ 0.337977] PCI: Transparent bridge - 0000:00:1e.0 [ 0.338011] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.338497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.339089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 0.339378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] [ 0.339667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] [ 0.620182] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.620182] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.620182] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 0.620182] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.620182] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.620182] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.620182] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.620182] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.620293] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.620293] pnp: PnP ACPI init [ 0.620293] ACPI: bus type pnp registered [ 0.648182] pnp: PnP ACPI: found 13 devices [ 0.648182] ACPI: ACPI bus type pnp unregistered [ 0.648182] PnPBIOS: Disabled by ACPI PNP [ 0.648182] PCI: Using ACPI for IRQ routing [ 0.653983] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.653991] hpet0: 3 64-bit timers, 14318180 Hz [ 0.655043] ACPI: RTC can wake from S4 [ 0.657979] Switched to high resolution mode on CPU 0 [ 0.658444] Switched to high resolution mode on CPU 1 [ 0.661956] system 00:01: ioport range 0x800-0x85f has been reserved [ 0.661961] system 00:01: ioport range 0xc00-0xc7f has been reserved [ 0.661965] system 00:01: ioport range 0x860-0x8ff could not be reserved [ 0.661980] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 0.661984] system 00:0a: iomem range 0x100000-0xffffff could not be reserved [ 0.661988] system 00:0a: iomem range 0x1000000-0xcfe8cbff could not be reserved [ 0.661991] system 00:0a: iomem range 0xc0000-0xfffff could not be reserved [ 0.661995] system 00:0a: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.661998] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.662002] system 00:0a: iomem range 0xfed20000-0xfed9ffff could not be reserved [ 0.662005] system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved [ 0.662009] system 00:0a: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.662017] system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.662021] system 00:0b: iomem range 0xfeda0000-0xfedacfff has been reserved [ 0.693652] PCI: Bridge: 0000:00:01.0 [ 0.693652] IO window: d000-dfff [ 0.693652] MEM window: 0xdfd00000-0xdfefffff [ 0.693652] PREFETCH window: 0x00000000d0000000-0x00000000d7ffffff [ 0.693652] PCI: Bridge: 0000:00:1c.0 [ 0.693652] IO window: disabled. [ 0.693652] MEM window: 0xdfc00000-0xdfcfffff [ 0.693652] PREFETCH window: disabled. [ 0.693652] PCI: Bridge: 0000:00:1c.1 [ 0.693652] IO window: disabled. [ 0.693652] MEM window: 0xdfb00000-0xdfbfffff [ 0.693652] PREFETCH window: disabled. [ 0.693652] PCI: Bridge: 0000:00:1e.0 [ 0.693652] IO window: c000-cfff [ 0.693652] MEM window: disabled. [ 0.693652] PREFETCH window: disabled. [ 0.693652] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.693652] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.693652] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.693652] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.693652] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.693652] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.693652] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.693652] NET: Registered protocol family 2 [ 0.705733] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.706048] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.709652] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.709652] TCP: Hash tables configured (established 131072 bind 65536) [ 0.709652] TCP reno registered [ 0.713760] NET: Registered protocol family 1 [ 0.713897] checking if image is initramfs... it is [ 1.217654] Freeing initrd memory: 6071k freed [ 1.217654] Simple Boot Flag value 0x87 read from CMOS RAM was invalid [ 1.217654] Simple Boot Flag at 0x7a set to 0x1 [ 1.217654] audit: initializing netlink socket (disabled) [ 1.217654] type=2000 audit(1266978750.208:1): initialized [ 1.217941] highmem bounce pool size: 64 pages [ 1.217941] Total HugeTLB memory allocated, 0 [ 1.217941] VFS: Disk quotas dquot_6.5.1 [ 1.217941] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.217941] msgmni has been set to 1730 [ 1.217941] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.217941] io scheduler noop registered [ 1.217941] io scheduler anticipatory registered [ 1.217941] io scheduler deadline registered [ 1.217941] io scheduler cfq registered (default) [ 1.217941] pci 0000:01:00.0: Boot video device [ 1.217941] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 1.217941] assign_interrupt_mode Found MSI capability [ 1.217941] Allocate Port Service[0000:00:01.0:pcie00] [ 1.217963] Allocate Port Service[0000:00:01.0:pcie03] [ 1.217963] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.217963] assign_interrupt_mode Found MSI capability [ 1.217963] Allocate Port Service[0000:00:1c.0:pcie00] [ 1.217963] Allocate Port Service[0000:00:1c.0:pcie02] [ 1.217963] Allocate Port Service[0000:00:1c.0:pcie03] [ 1.221938] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.221938] assign_interrupt_mode Found MSI capability [ 1.221938] Allocate Port Service[0000:00:1c.1:pcie00] [ 1.221938] Allocate Port Service[0000:00:1c.1:pcie02] [ 1.221938] Allocate Port Service[0000:00:1c.1:pcie03] [ 1.221938] isapnp: Scanning for PnP cards... [ 1.573523] isapnp: No Plug & Play device found [ 1.580924] hpet_resources: 0xfed00000 is busy [ 1.580924] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.580924] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.580924] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.584954] brd: module loaded [ 1.584954] PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1 [ 1.584954] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.584954] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.584954] mice: PS/2 mouse device common for all mice [ 1.584954] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.584954] rtc0: alarms up to one day [ 1.584954] cpuidle: using governor ladder [ 1.584954] cpuidle: using governor menu [ 1.584954] No iBFT detected. [ 1.584954] TCP cubic registered [ 1.584954] NET: Registered protocol family 17 [ 1.584954] Using IPI No-Shortcut mode [ 1.584954] registered taskstats version 1 [ 1.584954] rtc_cmos 00:05: setting system clock to 2010-02-24 02:32:31 UTC (1266978751) [ 1.584954] Freeing unused kernel memory: 244k freed [ 1.620955] input: AT Translated Set 2 keyboard as /class/input/input 0 [ 1.684924] ACPI: ACPI0007:00 is registered as cooling_device0 [ 1.684924] ACPI: ACPI0007:01 is registered as cooling_device1 [ 2.165927] usbcore: registered new interface driver usbfs [ 2.165927] usbcore: registered new interface driver hub [ 2.174282] usbcore: registered new device driver usb [ 2.178282] USB Universal Host Controller Interface driver v3.0 [ 2.178282] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 2.178282] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 2.178282] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.178282] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.178282] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80 [ 2.178282] usb usb1: configuration #1 chosen from 1 choice [ 2.178282] hub 1-0:1.0: USB hub found [ 2.178282] hub 1-0:1.0: 2 ports detected [ 2.279407] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.279414] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.279419] usb usb1: Product: UHCI Host Controller [ 2.279423] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 2.279428] usb usb1: SerialNumber: 0000:00:1d.0 [ 2.279478] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 [ 2.279493] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 2.279499] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.279538] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 2.279574] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60 [ 2.281841] usb usb2: configuration #1 chosen from 1 choice [ 2.281895] hub 2-0:1.0: USB hub found [ 2.281906] hub 2-0:1.0: 2 ports detected [ 2.288096] Uniform Multi-Platform E-IDE driver [ 2.288107] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 2.376440] Floppy drive(s): fd0 is 1.44M [ 2.385335] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.385344] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.385352] usb usb2: Product: UHCI Host Controller [ 2.385358] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 2.385364] usb usb2: SerialNumber: 0000:00:1d.1 [ 2.385504] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 2.385525] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 2.385534] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.385596] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 2.387398] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 2.387565] usb usb3: configuration #1 chosen from 1 choice [ 2.387635] hub 3-0:1.0: USB hub found [ 2.387647] hub 3-0:1.0: 2 ports detected [ 2.392908] FDC 0 is a post-1991 82077 [ 2.490401] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.490406] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.490410] usb usb3: Product: UHCI Host Controller [ 2.490412] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 2.490415] usb usb3: SerialNumber: 0000:00:1d.2 [ 2.490472] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 2.490484] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 2.490488] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.490518] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 2.490549] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20 [ 2.490639] usb usb4: configuration #1 chosen from 1 choice [ 2.490679] hub 4-0:1.0: USB hub found [ 2.490687] hub 4-0:1.0: 2 ports detected [ 2.594378] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.594382] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.594385] usb usb4: Product: UHCI Host Controller [ 2.594387] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 2.594390] usb usb4: SerialNumber: 0000:00:1d.3 [ 2.594569] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21 [ 2.594584] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 2.594588] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.594617] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 2.602274] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.602274] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 2.602274] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800 [ 2.698273] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 2.714283] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.714366] usb usb5: configuration #1 chosen from 1 choice [ 2.714402] hub 5-0:1.0: USB hub found [ 2.714412] hub 5-0:1.0: 8 ports detected [ 2.774805] hub 2-0:1.0: unable to enumerate USB device on port 1 [ 2.818388] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.818392] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.818395] usb usb5: Product: EHCI Host Controller [ 2.818398] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd [ 2.818400] usb usb5: SerialNumber: 0000:00:1d.7 [ 2.822772] ICH6: IDE controller (0x8086:0x266f rev 0x03) at PCI slot 0000:00:1f.1 [ 2.822772] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 2.822772] ICH6: not 100% native mode: will probe irqs later [ 2.822772] ICH6: IDE port disabled [ 2.822772] ide0: BM-DMA at 0xffa0-0xffa7 [ 2.822772] Probing IDE interface ide0... [ 3.614224] hda: SONY DVD RW DRU-840A, ATAPI CD/DVD-ROM drive [ 3.650120] usb 2-1: new low speed USB device using uhci_hcd and address 3 [ 3.822112] usb 2-1: configuration #1 chosen from 1 choice [ 3.835611] usb 2-1: New USB device found, idVendor=045e, idProduct=0040 [ 3.835617] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.835622] usb 2-1: Product: Microsoft Wheel Mouse Optical� [ 3.835626] usb 2-1: Manufacturer: Microsoft [ 4.066112] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 4.086312] hdb: _NEC DVD+RW ND-3100AD, ATAPI CD/DVD-ROM drive [ 4.142167] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 4.142312] hda: drive side 80-wire cable detection failed, limiting max speed to UDMA33 [ 4.142315] hda: UDMA/33 mode selected [ 4.142500] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 4.142574] hdb: UDMA/33 mode selected [ 4.142689] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.142805] tg3.c:v3.92.1 (June 9, 2008) [ 4.142824] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 4.142835] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 4.162501] eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:11:11:45:8b:76 [ 4.162506] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 4.162510] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 4.258499] No dock devices found. [ 4.271554] SCSI subsystem initialized [ 4.291562] libata version 3.00 loaded. [ 4.295565] ata_piix 0000:00:1f.2: version 2.12 [ 4.295565] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20 [ 4.295565] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 4.339932] usb 3-1: configuration #1 chosen from 1 choice [ 4.377694] usb 3-1: New USB device found, idVendor=03f0, idProduct=0004 [ 4.377700] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.377705] usb 3-1: Product: DeskJet 895C [ 4.377708] usb 3-1: Manufacturer: Hewlett-Packard [ 4.377712] usb 3-1: SerialNumber: MX02M1S0HCFB [ 4.381660] usbcore: registered new interface driver hiddev [ 4.399658] input: Microsoft Microsoft Wheel Mouse Optical� as /class/input/input1 [ 4.407660] input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical�] on usb-0000:00:1d.1-1 [ 4.407660] usbcore: registered new interface driver usbhid [ 4.407660] usbhid: v2.6:USB HID core driver [ 4.459570] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 4.463538] scsi0 : ata_piix [ 4.463538] scsi1 : ata_piix [ 4.463538] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20 [ 4.463538] ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20 [ 4.627524] ata1.00: ATA-7: Maxtor 6Y160M0, YAR51HW0, max UDMA/133 [ 4.627524] ata1.00: 312500000 sectors, multi 8: LBA48 [ 4.743902] ata1.00: configured for UDMA/133 [ 4.909681] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y160M0 YAR5 PQ: 0 ANSI: 5 [ 4.984025] hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 4.984045] Uniform CD-ROM driver Revision: 3.20 [ 4.984025] hdb: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache [ 5.004233] Driver 'sd' needs updating - please use bus_type methods [ 5.004341] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB) [ 5.004364] sd 0:0:0:0: [sda] Write Protect is off [ 5.004367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.004404] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.004476] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB) [ 5.004497] sd 0:0:0:0: [sda] Write Protect is off [ 5.004500] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.004536] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.004542] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > [ 5.056378] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.407307] PM: Starting manual resume from disk [ 5.440179] kjournald starting. Commit interval 5 seconds [ 5.440179] EXT3-fs: mounted filesystem with ordered data mode. [ 6.505935] udevd version 125 started [ 7.267889] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.013165] input: Power Button (FF) as /class/input/input2 [ 8.075084] ACPI: Power Button (FF) [PWRF] [ 8.075198] input: Power Button (CM) as /class/input/input3 [ 8.136167] ACPI: Power Button (CM) [VBTN] [ 8.635981] input: PC Speaker as /class/input/input4 [ 8.804180] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 [ 8.847395] intel_rng: Firmware space is locked read-only. If you can't or [ 8.847399] intel_rng: don't want to disable this in firmware setup, and if [ 8.847402] intel_rng: you are certain that your system has a functional [ 8.847405] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 8.896857] usblp0: Disabling reads from problematic bidirectional printer [ 8.912859] usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004 [ 8.912859] usbcore: registered new interface driver usblp [ 9.163648] parport_pc 00:08: reported by Plug and Play ACPI [ 9.163709] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 9.517324] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 9.517324] snd-ca0106: Model 1007 Rev 00000000 Serial 10071102 [ 9.867602] Adding 2650684k swap on /dev/sda7. Priority:-1 extents:1 across:2650684k [ 10.139452] EXT3 FS on sda1, internal journal [ 10.804379] loop: module loaded [ 11.969336] kjournald starting. Commit interval 5 seconds [ 11.993553] EXT3 FS on sda9, internal journal [ 11.993561] EXT3-fs: mounted filesystem with ordered data mode. [ 12.035851] kjournald starting. Commit interval 5 seconds [ 12.048070] EXT3 FS on sda8, internal journal [ 12.048077] EXT3-fs: mounted filesystem with ordered data mode. [ 12.071357] kjournald starting. Commit interval 5 seconds [ 12.075608] EXT3 FS on sda5, internal journal [ 12.075614] EXT3-fs: mounted filesystem with ordered data mode. [ 12.095847] kjournald starting. Commit interval 5 seconds [ 12.111846] EXT3 FS on sda6, internal journal [ 12.111846] EXT3-fs: mounted filesystem with ordered data mode. [ 15.464984] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 15.464991] tg3: eth0: Flow control is off for TX and off for RX. [ 15.923756] NET: Registered protocol family 10 [ 15.923756] lo: Disabled Privacy Extensions [ 16.096323] lp0: using parport0 (interrupt-driven). [ 16.116470] ppdev: user-space parallel port driver [ 22.655561] Linux agpgart interface v0.103 [ 22.687563] [drm] Initialized drm 1.1.0 20060810 [ 22.716017] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 22.716030] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 22.716131] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 24.805900] [drm] Setting GART location based on new memory map [ 24.805900] [drm] Loading R300 Microcode [ 24.805900] [drm] Num pipes: 1 [ 24.805900] [drm] writeback test succeeded in 1 usecs [ 37.493908] eth0: no IPv6 routers present Here is the output of dpkg-query: alsa-base 1.0.17.dfsg-4 ALSA driver configuration files. Looks like the alsa utils is not installed. The Intel audio controller is still listed along with the Creative Labs audio controller in the "lspci" output: Intel Corp. 82801FR (ICH6 Family) AC'97 Audio Controller. -- To UNSUBSCRIBE, email to debian-user-REQUEST(a)lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster(a)lists.debian.org Archive: http://lists.debian.org/op.u8l9ohw6do2va7(a)dimension8400
From: Stephen Powell on 24 Feb 2010 09:30
On Wed, 24 Feb 2010 00:32:31 -0500 (EST), Cecil Knutson wrote: > > Stephen, This is the second time I have replied, but I don't see the > reply on the list, so here it goes again. This is the first reply I have received. The first one must have gotten lost in the internet somewhere. I was beginning to wonder what happened. > "Local" is in the /etc/modprobe.d directory; it has the right contents; > modprobe.conf does not exist; the "cat" command does show the contents of > the file, but I don't see anything that shows if it is plain text or not. If it looks normal, in the output of "cat", it's plain text. > Here is a section out of the output of "lsmod" pertaining to loaded sound > modules: > > snd_ca0106 27584 3 > snd_ac97_codec 88452 1 snd_ca0106 > snd_pcm_oss 32800 0 > snd_mixer_oss 12320 1 snd_pcm_oss > snd_pcm 62660 4 snd_ca0106,snd_ac97_codec,snd_pcm_oss > snd_seq_dummy 2660 0 > snd_seq_oss 24992 0 > snd_seq_midi 5728 0 > snd_rawmidi 18496 2 snd_ca0106,snd_seq_midi > snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi > snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event > > I didn't see anything about snd_intel8x0 anywhere in the output. Good. That means that the blacklist is working or the chip is on the removed card. > Here is the output of dmesg: > > ... (content eliminated for brevity's sake) > I don't see anything obviously wrong at first glance. I'll take a closer look and reply if I see a problem. > Here is the output of dpkg-query: > alsa-base 1.0.17.dfsg-4 ALSA driver configuration files. > > Looks like the alsa utils is not installed. That's a problem. We need that. Install cdtool as well. > The Intel audio controller is still listed along with the Creative Labs > audio controller in the "lspci" output: Intel Corp. 82801FR (ICH6 Family) > AC'97 Audio Controller. That tells us two things: (1) the chip is not on the internal modem card that you removed, and (2) the blacklist is working. That makes me wonder though. Is the sound chip on the motherboard? Is there any evidence that the manufacturer intended it to be the sound chip for the system? Are there audio jacks on the back of the system for speakers, microphone, line-in, line-out, etc. that are *not* on the edge connector of your sound card? Did you install the Sound Blaster Live card as an after-market add-on? Or did it come with the machine? -- To UNSUBSCRIBE, email to debian-user-REQUEST(a)lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster(a)lists.debian.org Archive: http://lists.debian.org/1296423901.14718541267021509559.JavaMail.root(a)md01.wow.synacor.com |